Automated Classification of an Environmental Sensitivity Index

Environmental Sensitivity Indices (ESI) composed of many field-data are essential for monitoring and control systems. At the beginning of the last decade an ESI of the German Wadden Sea was developed for use by the relevant authorities. This ESI was derived by experts semi-manually analysing the extensive field data-set. An algorithm is presented here which emulates human expert-decisions on the classification of sensitivity classes. This will permit the necessary regular updates of ESI-determination when new field data become available using automated classifications procedures. After tuning the algorithm parameters it generates decisions identical to those of human experts in about 97% of all locations tested. In addition, the algorithm presented also enables erroneous or extremely seldom field data to be identified.     

Glacial-interglacial changes in the occurrence of Pb, Cd, Cu and Zn in Vostok Antarctic ice from 240 000 to 410 000 years BP

Lead (Pb), cadmium (Cd), copper (Cu) and zinc (Zn) have been measured by electrothermal atomic absorption spectrometry in various sections of the 3623 m deep ice core drilled at Vostok, in central East Antarctica. The sections were dated from 240 to 410 kyear BP (Marine Isotopic Stages (MIS) 7.5 to 11.3), which corresponds to the 3rd and 4th glacial-interglacial cycles before present. Concentrations are found to have varied greatly during this 170 kyear time period, with high concentration values during the coldest climatic stages such as MIS 8.4 and 10.2 and much lower concentration values during warmer periods, such as the interglacials MIS 7.5, 9.3 and 11.3. Rock and soil dust were the dominant sources for Pb, whatever the period, and for Zn and Cu and possibly Cd during cold climatic stages. The contribution from volcanic emissions was important for Cd during all periods and might have been significant for Cu and Zn during warm periods.     

Geophysical and hydrological data assimilation to monitor water content dynamics in the rocky unsaturated zone

In recent years, geophysics is increasingly used to study the flow and transport processes in the vadose zone. Particularly, when the vadose zone is made up of rocks, it is difficult to install sensors in the subsurface to measure hydrological state variables directly. In these cases, the electrical resistivity tomography (ERT) represents a useful tool to monitor the hydrodynamics of the infiltration and to estimate hydraulic parameters and state variables, such as hydraulic conductivity and water content. We propose an integrated approach aimed at predicting water content dynamics in calcarenite, a sedimentary carbonatic porous rock. The uncoupled hydrogeophysical approach proposed consists in 4D ERT monitoring conducted during an infiltrometer test under falling head conditions. Capacitance probes were installed to measure water content at different depths to validate the estimations derived from ERT. A numerical procedure, based on a data assimilation technique, was accomplished by combining the model (i.e., Richards’ equation) with the observations in order to provide reliable water content estimations. We have used a new data assimilation method that is easy to implement, based on the ensemble Kalman filter coupled with Brownian bridges. This approach is particularly suitable for strongly non-linear models, such as Richards’ equation, in order to take into account both the model uncertainty and the observation errors. The proposed data assimilation approach was tested for the first time on field data. A reasonable agreement was found between observations and predictions confirming the ability of the integrated approach to predict water content dynamics in the rocky subsoil.     

Recovery of MSWI and soil washing residues as concrete aggregates

The aim of the present work was to study if municipal solid waste incinerator (MSWI) residues and aggregates derived from contaminated soil washing could be used as alternative aggregates for concrete production.Initially, chemical, physical and geometric characteristics (according to UNI EN 12620) of municipal solid waste incineration bottom ashes and some contaminated soils were evaluated; moreover, the pollutants release was evaluated by means of leaching tests. The results showed that the reuse of pre-treated MSWI bottom ash and washed soil is possible, either from technical or environmental point of view, while it is not possible for the raw wastes.Then, the natural aggregate was partially and totally replaced with these recycled aggregates for the production of concrete mixtures that were characterized by conventional mechanical and leaching tests. Good results were obtained using the same dosage of a high resistance cement (42.5R calcareous Portland cement instead of 32.5R); the concrete mixture containing 400 kg/m³ of washed bottom ash and high resistance cement was classified as structural concrete (C25/30 class). Regarding the pollutants leaching, all concrete mixtures respected the limit values according to the Italian regulation.     

Village pubs as a social propellant in rural areas: an econometric study

There is no place like England to witness the role of pubs as a social networking hotspot. Social networks lie at the foundations of most of the social and economic interactions of individuals. The aim of this paper is to assess the importance of pubs as natural locations for the development of social networks and how their presence affects the socio-economic activity of a given area or region. The econometric analysis conducted on rural parishes in Cumbria, a peripheral county in Northern England, reveals that village pubs have a positive influence on the socio-economic activity of local communities.     

Oxidative degradation of chlorophenol derivatives promoted by microwaves or power ultrasound: a mechanism investigation

Background, aim, and scope

Phenols are the most common pollutants in industrial wastewaters (particularly from oil refineries, resin manufacture, and coal processing). In the last two decades, it has become common knowledge that they can be effectively destroyed by nonconventional techniques such as power ultrasound (US) and/or microwave (MW) irradiation. Both techniques may strongly promote advanced oxidation processes (AOPs). The present study aimed to shed light on the effect and mechanism of US- and MW-promoted oxidative degradation of chlorophenols; 2,4-dichlorophenoxyacetic acid (2,4-D), a pesticide widespread in the environment, was chosen as the model compound.

Materials and methods

2,4-D degradation by AOPs was carried out either under US (20 and 300 kHz) in aqueous solutions (with and without the addition of Fenton reagent) or solvent-free under MW with sodium percarbonate (SPC). All these reactions were monitored by gas chromatography–mass spectrometry (GC–MS) analysis and compared with the classical Fenton reaction in water under magnetic stirring. The same set of treatments was also applied to 2,4-dichlorophenol (2,4-DCP) and phenol, the first two products that occur a step down in the degradation sequence. Fenton and Fenton-like reagents were employed at the lowest active concentration.

Results

The effects of US and MW irradiation were investigated and compared with those of conventional treatments. Detailed mechanisms of Fenton-type reactions were suggested for 2,4-D, 2,4-DCP, and phenol, underlining the principal degradation products identified. MW-promoted degradation under solvent-free conditions with solid Fenton-like reagents (viz. SPC) is extremely efficient and mainly follows pyrolytic pathways. Power US strongly accelerates the degradation of 2,4-D in water through a rapid generation of highly reactive radicals; it does not lead to the formation of more toxic dimers.

Discussion

We show that US and MW enhance the oxidative degradation of 2,4-D and that a considerable saving of oxidants and cutting down of reaction times is thereby achieved. The results support the interpretation of previously published data and improve the understanding of the factors of direct degradation along different pathways.

Conclusions

Oxidative pathways for 2,4-D, 2,4-DCP, and phenol were proposed by a careful monitoring of the reactions and detection of intermediates by GC–MS.

Recommendations and perspectives

The understanding of the factors that affect chlorophenols degradation along different pathways may facilitate the optimization of the treatment. Type of energy source (US or MW), power, and frequency to be applied could be designed in function of the operative scenario (amount of pollutant in soil, water, or oils).     

Influence of treatment techniques on Cu leaching and different organic fractions in MSWI bottom ash leachate

The leaching of heavy metals, such as copper, from municipal solid waste incinerator (MSWI) bottom ash is of concern in many countries and may inhibit the beneficial reuse of this secondary material. Previous studies have focused on the role of dissolved organic carbon (DOC) on the leaching of copper. Recently, a study of the Energy Research Centre of The Netherlands (ECN) showed fulvic acid-type components to exist in the MSWI bottom ash leachates and to be likely responsible for the generally observed enhanced copper leaching. These findings were verified for a MSWI bottom ash (slashed circle 0.1-2 mm) fraction from an incinerator in Flanders. The filtered leachates were subjected to the IHSS fractionation procedure to identify and quantify the fractions of humic acid (HA), fulvic acid (FA) and hydrophilic organic carbon (Hi). The possible complexation of fulvic acid with other heavy metals (e.g., lead) was also investigated. The identified role of fulvic acids in the leaching of copper and other heavy metals can be used in the development of techniques to improve the environmental quality of MSWI bottom ash. Thermal treatment and extraction with a 0.2 M ammonium-citrate solution were optimized to reduce the leaching of copper and other heavy metals. The effect of these techniques on the different fractions of organic matter (HA, FA, Hi) was studied. However, due to the obvious drawbacks of the two techniques, research is focused on finding other (new) techniques to treat MSWI bottom ash. In view of this, particle size-based separation was performed to evaluate its effect on heavy metal leaching and on HA, FA and Hi in MSWI bottom ash leachates.     

Use of sulfadimethoxine in intensive calf farming: evaluation of transfer to stable manure and soil

After prophylactic treatment of 50 calves with 62mgkg(-1)day(-1) of sulfadimethoxine (SDM) for five days, the levels of the drug over time were followed in feces, bedding and stable manure, and then in the soil of a manured field and surrounding drainage courses. Analysis were done by HPLC after applying to the different matrices a quick and simple extraction procedure. The half-life of the drug in bedding was very short (24h). In stable manure the degradation rate of the drug slowed down and the calculated half-life was 64 days, with 390microgkg(-1) of SDM still detectable after three months maturation. However, in a five months matured stable manure obtained from other groups of calves subjected to the same prophylactic treatment, levels of SDM were <50muicrokg(-1) (LOD of the analytical method). After field fertilization with this manure, no traces of SDM were found in soil (LOD 10microgkg(-1)) or in the water (LOD 2microgl(-1)) from the surrounding drainage courses. Using the internationally recognised DAPHTOXKIT-Ftrade mark, a SDM toxicity test toward Daphnia magna was performed in the range 10-100mgl(-1). The test gave negative results both after 24 and 48h, confirming that microcrustaceans are less sensitive than other models to the toxicity of antibacterials. However, based on data from other authors, concerning algal toxicity and microbial inhibition, and on the analytical results from the current field study, the calculated worst-case EC50/PEC ratio for SDM both in freshwater and in soil was still >1000.     

Assessing differences in chemical disaster proneness: The community chemical hazard vulnerability inventory*

The burgeoning number of accidents with dangerous chemicals makes it incumbent upon community and regional planners to systematically deal with this problem. The first step invariably involves the assessment of the likelihood and type of incident which may impact a given area so that disasters may be averted or, at least, their effects mitigated. This paper presents one such assessment scheme, the Community Chemical Hazard Vulnerability Inventory (CCHVI). This instrument, aside from considering the type and volume of substances posing a threat to a designated area, considers the physical and human resources available, as well as the general state of readiness of the area (including such things as the interface of emergency-related organizations). The use of such vulnerability assessment instruments allows local emergency planners to identify particular dangers within their communities and permits regional planners to allocate funds for planning according to relative needs.