Nanosensors and nanobiosensors in food and agriculture

The food and agriculture sector controls the economic growth of a developing country. The food industries have practices of growing crops, raising livestock and sea foods, food processing and packaging, regulating production and distribution with quality and safety. The process control and monitoring quality are crucial steps. Here we review nanosensors and nanobiosensors as alternative of classical quantification methods. Nanoscale dimensions of metal nanoparticles, metal nanoclusters, metal oxide nanoparticles, metal and carbon quantum dots, graphene, carbon nanotubes, and nanocomposites expand the sensitivity by signal amplification and integrate several novel transduction principles such as enhanced electrochemical, optical, Raman, enhanced catalytic activity, and superparamagnetic properties into the nanosensors. The electrochemical nanosensors, optical nanosensors, electronic nose and electronic tongue, nanobarcode technology, and wireless nanosensors have revolutionized the sensing in food and agriculture sectors with multiplex and real-time sensing capabilities. Despite previous success stories of the remunerative health sector, the approaches are transferred subsequently to food and agriculture sector; with potential application in detection of food contaminants such as preservatives, antibiotics, heavy metal ions, toxins, microbial load, and pathogens along with the rapid monitoring of temperature, traceability, humidity, gas, and aroma of the food stuff.     

Health risks from PAHs and potentially toxic elements in street dust of a coal mining area in India

Environmental Geochemistry and Health - Polycyclic aromatic hydrocarbons (PAHs) and potentially toxic elements (PTEs) (Ba, Zn, Pb, Cu, Cr, Ni, As, Co) were determined in the road dusts of a coal...     

Measurements of major ion concentration in settled coarse particles and aerosols at a semiarid rural site in India

Deposition rates and deposition velocities of water-soluble ions (F, Cl, NO3, SO4, NH4, Ca, Mg, Na and K) were measured at a rural site (Gopalpura, Agra). Dry deposition samples were collected throughout the year from December 1995 to August 1997, while the aerosol samples were collected only during the winter season of 1996. Surrogate technique was used to collect the dry deposition samples, while aerosol samples were collected on PTFE membrane filter. Deposition velocities (Vd) of SO4 and NO3 are < or = 0.01 m s(-1) while Ca, Mg, Na, K, NH4, F and Cl exhibit greater than 0.01 m s(-1) Equivalent concentration ratios of K/Na, Ca/Na and Mg/Na conform with the corresponding ratios of local soil, indicating the dominant contribution of local sources. Deposition rates are maximum in winter, followed by summer and monsoon. No significant differences are found in dry deposition rates of all ions or in atmospheric concentrations of soil-derived elements with respect to wind direction. However, in aerosols, concentrations of F, Cl, NO3 and SO4 are higher with winds from southwesterly and westerly directions corresponding to pollution sources located in these directions. Deposition data have been used to calculate the critical load of S and N for soil with respect to Triticum vulgaris. The critical load of actual acidity was found to be 622.4 eq ha(-1) year(-1) within the range of 500-1,000 eq ha(-1) year(-1) as assessed by the RAINS-Asia model for this region. The present load of S and N (77.4 and 86.4 eq ha(-1) year(-1)) was much lower than the critical load of S and N (622.4 and 2,000 eq ha(-1) year(-1)), indicating that at present there is no harmful effect on ecosystem structure and function.     

Resource conservation strategies for rice‐wheat cropping systems on partially reclaimed sodic soils of the Indo‐Gangetic region,and their effects on soil carbon

The Indo‐Gangetic plain is characterized by intensive agriculture, largely by resource‐poor small and marginal farmers. Vast swathes of salt‐affected areas in the region provide both challenges and opportunities to bolster food security and sequester carbon after reclamation. Sustainable management of reclaimed soils via resource conservation strategies, such as residue retention, is key to the prosperity of the farmer, as well as increases the efficiency of expensive initiatives to further reclaim sodic land areas, which currently lay barren. After five years of experimentation on resource conservation strategies for rice‐wheat systems on partially reclaimed sodic soils of the Indo‐Gangetic region, we evaluated changes in different soil carbon pools and crop yield. Out of all resource conservation techniques which were tested, rice‐wheat crop residue addition (30% of total production) was most effective in increasing soil organic carbon (SOC). In rice, without crop residue addition (WCR), soils under zero‐tillage with transplanting, summer ploughing with transplanting and direct seeding with brown manuring showed a significant increase in SOC over the control (puddling in rice, conventional tillage in wheat). In these treatments relatively higher levels of carbon were attained in all aggregate fractions compared to the control. Soil aggregate sizes in meso (0.25‐2.0 mm) and macro (2‐8 mm) ranges increased, whereas micro (< 0.25 mm) fractions decreased in soils under zero‐till practices, both with and without crop residue addition. Direct seeding with brown manuring and zero tillage with transplanting also showed an increase of 135% and 95%, respectively, over the control in microbial biomass carbon, without crop residue incorporation. In zero tillage with transplanting treatment, both with and without crop residue showed significant increase in soil carbon sequestration potential. Though the changes in accrued soil carbon did not bring about significant differences in terms of grain yield, overall synthesis in terms of balance between yield and carbon sequestration indicated that summer ploughing with transplanting and zero tillage with transplanting sequestered significantly higher rates of carbon, yet yielded on par with conventional practices. These could be appropriate alternatives to immediately replace conventional tillage and planting practices for rice‐wheat cropping systems in the sodic soils of the Indo‐Gangetic region.     

Sulfide oxidation in fluidized bed bioreactor using nylon support material

A continuous fluidized bed bioreactor (FBBR) with nylon support particles was used to treat synthetic sulfide wastewater at different hydraulic retention time of 25, 50 and 75 min and upflow velocity of 14, 17 and 20 m/hr. The effects of upflow velocity, hydraulic retention time and reactor operation time on sulfide oxidation rate were studied using statistical model. Mixed culture obtained from the activated sludge, taken from tannery effluent treatment plant, was used as a source for microorganisms. The diameter and density of the nylon particles were 2-3 mm and 1140 kg/m³, respectively. Experiments were carried out in the reactor at a temperature of (30 ± 2)℃, at a fixed bed height of 16 cm after the formation of biofilm on the surface of support particles. Biofilm thickness reached (42 ± 3) μupm after 15 days from reactor start-up. The sulfide oxidation, sulfate and sulfur formation is examined at all hydraulic retention times and upflow velocities. The results indicated that almost 90%-92% sulfide oxidation was achieved at all hydraulic retention times. Statistical model could explain 94% of the variability and analysis of variance showed that upflow velocity and hydraulic retention time slightly affected the sulfide oxidation rate. The highest sulfide oxidation of 92% with 70% sulfur was obtained at hydraulic retention time of 75 min and upflow velocity of 14 m/hr.     

Utilization of agricultural waste biomass and recycling toward circular bioeconomy

Environmental Science and Pollution Research - The major global concern on energy is focused on conventional fossil resources. The burning of fossil fuels is an origin of greenhouse gas emissions...     

Removal of substituted phenols onto iron‐treated Nostoc sp. biomass

This study explored the possibility of removing 4‐nitrophenol (4‐NP) and 2,4‐dichlorophenol (2,4‐DCP) from water by using a dead blue‐green algae, Nostoc sp., dried and untreated and dried and treated with iron (Fe‐treated with 0.1 M ferric chloride solution for 1 day). The Nostoc sp. untreated and Fe‐treated biomass were used to study the sorption and desorption of 4‐NP and 2,4‐DCP. The effects of solute concentration, ionic strength, and temperature on sorption and desorption in the presence of untreated and treated Nostoc sp. biomass were investigated. The Fe‐treated Nostoc sp. biomass sorbed higher amounts of both 4‐NP and 2,4‐DCP than the untreated biomass. The percent cumulative desorption decreased from 6.41% to 0.28% and 1.84% to 0.19%, respectively, for 4‐NP and 2,4‐DCP for the Fe‐treated biomass. Biosorption of 4‐NP and 2,4‐DCP onto untreated and Fe‐treated Nostoc sp. biomass conformed to Freundlich isotherms. Iron treatment of Nostoc sp. biomass increased the value of ln K from 8.07 to 8.59 for 4‐NP and from 8.04 to 8.51 for 2,4‐DCP but decreased their desorption. An increase in ionic strength (0.003–0.03) increased the biosorption of both substituted phenols and decreased their percent desorption. An increase in temperature in the range of 15–35°C decreased the sorption of 4‐NP and 2,4‐DCP onto both untreated and Fe‐treated Nostoc sp. biomass and increased their desorption, indicating that the biosorption of both substituted phenols onto untreated and Fe‐treated Nostoc sp. biomass was principally a physical process. The results of this study suggest that Fe‐treated dried Nostoc sp. biomass could be explored as an inexpensive and eco‐friendly material for the effective removal of these phenols and, potentially, other chemicals from industrial wastewater and contaminated groundwater.