Determination of total arsenic content in water by atomic absorption spectroscopy (AAS) using vapour generation assembly (VGA)

Analysis of arsenic in water is important in view of contamination of ground water with arsenic in some parts of the world including West Bengal in India and neighboring country Bangladesh. WHO has fixed the threshold for arsenic in drinking water to 10ppb (microg/l) level, hence the methodology for determination of arsenic is required to be sensitive at ppb level. Atomic absorption spectrophotometry with vapour generation assembly (AAS-VGA) is well known technique for the trace analysis of arsenic. However, total arsenic analysis [As(III)+As(V)] is very crucial and it requires reduction of As(V) to As(III) for correct analysis. As(III) is reduced to AsH3 vapours and finally to free As atoms, which are responsible for absorption signal in AAS. To accomplish this the vapour generation assembly attached to AAS has acid channel filled with 10 M HCl and the reduction channel with sodium borohydride. Further sample can be reduced either before aspiration for analysis, using potassium iodide (KI) or the sample can be introduced in the instrument directly and KI can be added in the reduction channel along with the sodium borohydride. The present work shows that samples prepared in 3 M HCl can be reduced with KI for 30 min before introduction in the instrument. Alternatively samples can be prepared in 6 M HCl and directly aspirated in AAS using KI in VGA reduction channel. The latter methodology is more useful when the sample size is large and time cycle is difficult to maintain. It is observed that the acid concentration of the sample in both the situations plays an important role. Further reduction in acid concentration and analysis time is achieved for the arsenic analysis by using modified method. Analysis in both the methods is sensitive at ppb level.     

Effects of solar geometry and operation period on stability of solar desalination systems: a review

Environmental Science and Pollution Research - The sun is the primary source of life on the earth. The heating effect of the sun provides a more fruitful environment for mankind. In addition, solar...     

Exposure profiles of mercury in human hair at a terai belt of North India

Human hair is frequently used as a bioindicator of mercury exposure. Mercury (Hg) has for centuries been a useful metal in a variety of applications. Unfortunately, this usefulness is counterbalanced by its neurotoxicological health impact. The US Environmental Protection Agency recommends keeping the hair Hg level <1.0 µg/g. Therefore, an investigation has been performed in order to ascertain the hair Hg levels among the people living at the terai belt of North India. Hair samples were collected from 111 individuals and were placed in an identified plastic bag, stapled to prevent the shift of the hair strand. Samples were analyzed by combustion, gold amalgamation, atomic absorption spectrometry (C-GA-AAS). The mean Hg level in hair was 0.28 µg/g for the whole group ranging from 0.0012 to 1.9091 µg/g. The mean hair Hg levels were 0.16 µg/g for men and 0.12 µg/g for women, indicating that men had higher hair Hg levels than women. Total hair Hg was found to be significantly associated with age, gender and fish consumption frequency. 98 % of the total sample had hair Hg concentrations less than 1.0 µg/g, i.e, within safe dose, whereas only 2 % had Hg concentrations greater than 1.0 µg/g, thereby exceeding the safe dose.

     

Three-phase partitioning for the separation of proteins,enzymes, biopolymers,oils and pigments: a review

Environmental Chemistry Letters - Modern biomass and organic waste are becoming major, carbon-neutral sources of fine chemicals, biomolecules and fuels to replace fossil fuel products. As a...     

Appraising efficacy of existing and advanced technologies for the remediation of beta-blockers from wastewater: A review

Environmental Science and Pollution Research - The discharge of emerging pollutants, such as beta-blockers (BB), has been recognized as one of the major threats to the environment due to the...     

Utilization of agricultural waste biomass and recycling toward circular bioeconomy

Environmental Science and Pollution Research - The major global concern on energy is focused on conventional fossil resources. The burning of fossil fuels is an origin of greenhouse gas emissions...     

Influence of Bioenergy Crop Production and Climate Change on Ecosystem Services

Land use change can significantly affect the provision of ecosystem services and the effects could be exacerbated by projected climate change. We quantify ecosystem services of bioenergy‐based land use change and estimate the potential changes of ecosystem services due to climate change projections. We considered 17 bioenergy‐based scenarios with Miscanthus, switchgrass, and corn stover as candidate bioenergy feedstock. Soil and Water Assessment Tool simulations of biomass/grain yield, hydrology, and water quality were used to quantify ecosystem services freshwater provision (FWPI), food (FPI) and fuel provision, erosion regulation (ERI), and flood regulation (FRI). Nine climate projections from Coupled Model Intercomparison Project phase‐3 were used to quantify the potential climate change variability. Overall, ecosystem services of heavily row cropped Wildcat Creek watershed were lower than St. Joseph River watershed which had more forested and perennial pasture lands. The provision of ecosystem services for both study watersheds were improved with bioenergy production scenarios. Miscanthus in marginal lands of Wildcat Creek (9% of total area) increased FWPI by 27% and ERI by 14% and decreased FPI by 12% from the baseline. For St. Joseph watershed, Miscanthus in marginal lands (18% of total area) improved FWPI by 87% and ERI by 23% while decreasing FPI by 46%. The relative impacts of land use change were considerably larger than climate change impacts in this paper. Editor's note : This paper is part of the featured series on SWAT Applications for Emerging Hydrologic and Water Quality Challenges. See the February 2017 issue for the introduction and background to the series.