Analysis of C1, C2, and C10 through C33 particle-phase and semi-volatile organic compound emissions from heavy-duty diesel engines

To meet increasingly stringent regulations for diesel engines, technologies such as combustion strategies, aftertreatment components, and fuel composition have continually evolved. The emissions reduction achieved by individual aftertreatment components using the same engine and fuel has been assessed and published previously (Liu et al., 2008a, Liu et al., 2008b, Liu et al., 2008c). The present study instead adopted a systems approach to evaluate the net effect of the corresponding technologies for model-year 2004 and 2007 engines. The 2004 engine was equipped with an exhaust gas recirculation (EGR) system, while the 2007 engine had an EGR system, a crankcase emissions coalescer, and a diesel particulate filter. The test engines were operated under the transient federal test procedure and samples were collected with a source dilution sampling system designed to stimulate atmospheric cooling and dilution conditions. The samples were analyzed for elemental carbon, organic carbon, and C₁, C₂, and C₁₀ through C₃₃ particle-phase and semi-volatile organic compounds. Of the more than 150 organic species analyzed, the largest portion of the emissions from the 2004 engine consisted of formaldehyde, acetaldehyde, and naphthalene and its derivatives, which were significantly reduced by the 2007 engine and emissions technology. The systems approach in this study simulates the operation of real-world diesel engines, and may provide insight into the future development of integrated engine technology. The results supply updated information for assessing the impact of diesel engine emissions on the chemical processes, radiative properties, and toxic components of the atmosphere.     

Sustainable rangeland management using a multi-fuzzy model: how to deal with heterogeneous experts' knowledge

While fuzzy specialists commonly use homogeneous experts' knowledge to construct fuzzy models, it is much more difficult to deal with knowledge elicited from a heterogeneous group of experts. This issue is exemplified in the area of sustainable rangeland management (SRM). One way to deal with the diversity of opinions is to develop a fuzzy system for all experts and to combine all these, the so-called primary systems, into one multi-fuzzy model. To derive each of the primary fuzzy systems, several semi-structured interviews were held in three different areas of the Fars province in Southwest Iran using the knowledge of a group of administrative experts. To obtain the final output of the multi-fuzzy model, we applied different 'voting' methods. The first method simply uses the arithmetic average of the primary outputs as the final output of the multi-fuzzy model. This final output represents an estimation of the right rate of stocking (RRS). We also propose other (un)supervised voting methods. Most importantly, by harmonising the primary outputs such that outliers get less emphasis, we introduce an unsupervised voting method for calculating a weighted estimate of the RRS. This harmonising method is expected to provide a new useful tool for policymakers dealing with heterogenity in experts' opinions: it is especially useful where limited field data are available and one is forced to rely on experts' knowledge only. By constructing the three fuzzy models based on the elicitation of heterogeneous experts' knowledge, our study shows the multidimensional vaguenesses that exist in SRM. Finally, by comparing the final RRS with its common values, this study strongly points to the existence of overgrazing in pastures in the three regions of the Fars province in Southwest Iran.     

Prenatal diagnosis of Bruck syndrome

Bruck syndrome is an autosomal recessive connective tissue disorder combining features of osteogenesis imperfecta and arthrogryposis multiplex congenita. There are only few reports describing this rare syndrome of multiple fractures and joint contractures that is thought to be a subtype of osteogenesis imperfecta. We report the first case of prenatal diagnosis of this syndrome in a fetus at 23 weeks of gestation. Ultrasound findings included brachycephaly, retrognathia marked shortening and bowing of both femurs, bilateral fixed flexion of the elbows, bilateral fixed extension of the wrists and partially fixed flexion of the knees. The parents opted for termination of pregnancy. Macroscopic and radiologic examination of the aborted fetus confirmed the prenatal diagnosis, whereas morphological studies of the bone tissue found no hard evidence of osteogenesis imperfecta, probably due to the early stage of pregnancy and the heterogeneity of the syndrome itself. Copyright © 2005 John Wiley & Sons, Ltd.     

The diagnostic performance of cytogenetic investigation in amniotic fluid cells and chorionic villi

First-trimester chorionic villus sampling has not reached the popularity of second-trimester amniocentesis in prenatal cytogenetic diagnosis, in contrast to initial expectations. We investigated whether a difference inthe diagnostic performances of cytogenetic investigation in amniotic fluid (AF) cells and chorionic villi in favour of AF-cells might justify this. Diagnostic performance was measured as laboratory failure rate, karyotype quality (G-band score, rate of follow-up samples, rate of wrong diagnoses), and karyotype representativity (rate of follow-up samples, rate of wrong diagnoses). From 1993–1999, 11 883 AF-samples were investigated (AF-cells). In chorionic villi, short term culture preparations solely were karyotyped from 1993–1996 (n=3499) (STC-villi), short and long-term culture preparations simultaneously provided a sufficient amount of tissue being available from 1997 onwards (n=1829) ((STC+LTC)-villi). Laboratory failure rates were the same after amniocentesis (0.40%) and chorionic villus sampling (0.50%). G-band scores (mean±SD) were equal in AF-cells (373±38.1) and LTC-villi (364±32.6) but significantly lower in STC-villi (311±34.6) (p=0.001). Follow-up sampling rates because of quality reasons were the same in AF-cells (0.14%), STC- villi (0.13%) and (STC+LTC)-villi (0.11%). Two wrong diagnoses turned up among AF-cells. Follow-up sampling rates because of representativity reasons differed significantly between AF-cells (0.10%), (STC+LTC)-villi (1.31%), and STC-villi (1.99%) (p<0.001). However, the ratios of the total numbers of follow-up samples and uncertain or abnormal cytogenetic results in STC, and (STC+LTC)-villi at cytogenetic risks ⩾3% (0.132 and 0.160, respectively) were equal to that in AF-cells at risks <3% (0.155). Two wrong diagnoses were made in STC-villi. Diagnostic performance improved in the rank order of STC-villi, (STC+LTC)-villi and AF-cells. At cytogenetic risks ⩾3%, (STC+LTC)-villi showed a diagnostic performance equal to that in AF-cells. This might justify a selective use of chorionic villus sampling. Copyright © 2001 John Wiley & Sons, Ltd.     

Prenatal diagnosis of mosaic tetrasomy 5p

We report the prenatal diagnosis of a fetus with tetrasomy 5p mosaicism resulting from a supernumerary isochromosome for the short arm of chromosome 5. The pregnancy was terminated and fetal autopsy revealed minor facial abnormalities (long philtrum, up-slanting palpebral fissures and a broad nasal bridge). Cultures were established from fetal skin, kidney, and pancreas for cytogenetic analysis; the i(5p) was observed only in the skin fibroblasts. To our knowledge, this is the fourth report of mosaic tetrasomy 5p and the first report of prenatal diagnosis of this abnormality. Copyright © 2001 John Wiley & Sons, Ltd.     

Quality control of waste to incineration--waste composition analysis in Lidk?ping, Sweden.

In order to decrease environmental impacts in waste management the choice of treatment method must be based on the characteristics of the waste. Present sampling procedures do not provide statistically representative samples of solid waste and this provides difficulties in characterization. The objective of this study was to develop a procedure for waste component analysis and sampling of waste after collection and at plant level. A further objective was to characterize the waste delivered to an incineration plant for physical and chemical properties and to determine the amounts of delivered waste that could be classified as biofuels and fossil fuels. The proportions of recyclables and hazardous waste were also examined. Samples were taken randomly from waste trucks and divided by square implementation. Statistical analysis of the results showed that the number of sub-samples could be decreased with only a moderate increase in the confidence interval. This means that future waste composition analyses could be made more efficient and thereby less expensive. The analysis of the waste delivered to the Lidk?ping incineration plant (Central Sweden) showed that 66.4% of the household waste was composed of biofuels and 21.3% of non-renewable combustibles, of which 40.3% were recyclables. In addition, 11.6% of the household waste was non-combustible and 0.6% hazardous waste. The heat value for the biofuels was 18.0-19.7 MJ kg(-1) dry mass (DM) and for the fossil fuels 28.2-33.9 MJ kg(-1) DM. The industrial waste consisted of 35.9% biofuels, 62.0% fossil fuels, 1.6% non-combustible and 0.5% hazardous waste. The heat value was 19.5 MJ kg(-1) DM for the biofuels and 31.4 MJ kg(-1) DM for the fossil fuels.