Analysis of extinction in ultraviolet and visible spectra of water bodies of the Paraguay and Brazil wetlands

The extinction spectra in ultraviolet and visible radiation were analyzed using filtered and unfiltered water samples obtained in 11 open water bodies in the Neembucù (Paraguay) and Pantanal (Brazil) wetlands. The role of dissolved and suspended matter in the total extinction was analyzed between 260 nm and 700 nm. The chromophoric dissolved organic matter (CDOM) was the major component in extinction of considered ultraviolet radiation (260-400 nm). The differences in CDOM concentrations explained the main pattern of extinction of the ultraviolet radiation in the samples. Nevertheless, differences between the studied water bodies were found also to depend on the rate of photodegradation and photobleaching. The methodology developed in the present study was to distinguish "humic optic waters" according to quantity and quality of dissolved and suspended matter present. In the "humic optic water", the penetration of 10% of incident UV radiation and the photoactive layer are estimated. The influence of particulate matter increases in the total extinction of the wavelengths higher than 400 nm. The integral of the extinction curve of suspended matter in the visible wavelengths (400-700 nm) was found to relate with the total suspended solids and chlorophyll concentrations.     

Gas-phase mercury reduction to measure total mercury in the flue gas of a coal-fired boiler

Gaseous elemental and total (elemental + oxidized) mercury (Hg) in the flue gas from a coal-fired boiler was measured by a modified ultraviolet (UV) spectrometer. Challenges to Hg measurement were the spectral interferences from other flue gas components and that UV measures only elemental Hg. To eliminate interference from flue gas components, a cartridge filled with gold-coated sand removed elemental Hg from a flue gas sample. The Hg-free flue gas was the reference gas, eliminating the spectral interferences. To measure total Hg by UV, oxidized Hg underwent a gas-phase, thermal-reduction in a quartz cell heated to 750 degrees C. Simultaneously, hydrogen was added to flash react with the oxygen present forming water vapor and preventing Hg re-oxidation as it exits the cell. Hg concentration results are in parts per billion by volume Hg at the flue gas oxygen concentration. The modified Hg analyzer and the Ontario Hydro method concurrently measured Hg at a field test site. Measurements were made at a 700-MW steam turbine plant with scrubber units and selective catalytic reduction. The flue gas sampled downstream of the selective catalytic reduction contained 2100 ppm SO2 and 75 ppm NOx. Total Hg measured by the Hg analyzer was within 20% of the Ontario Hydro results.     

Electrostatic Precipitator Performance from the Point of View of Gas Treatment Time

This paper describes a risk assessment methodology for preliminary assessment of municipal sludge incineration. The methodology is a valuable tool in that it can be used for determining the hazard indices of chemical contaminants that might be present in sewage sludge used in incineration. The paper examines source characteristics (i.e., facility design), atmospheric dispersion of emission, and resulting human exposure and risk from sludge incinerators. Seven of the ten organics were screened for furtherinvestigation. An example of the calculations are presented for cadmium.     

Bibliometric analysis of simulated driving research from 1997 to 2016

Objective: The objective of this study was to explore the evolution footprints of simulated driving research in the past 20 years through rigorous and systematic bibliometric analysis, to provide insights regarding when and where the research was performed and by whom and how the mainstream content evolved over the years.

Methods: The analysis began with data retrieval in Web of Science with defined search terms related to simulated driving. BibExcel and CiteSpace were employed to conduct the performance analysis and co-citation network analysis; that is, probe of the performance of institutes, journals, authors, and research hotspots.

Results: A total of 3,766 documents were filtered out and presented an exponential growth from 1997 to 2016. The United States contributed the most publications as well as international collaborations followed by Germany and China. In addition, several universities in The Netherlands and the United States dominated the list of contributing institutes. The leading journals were in transportation and ergonomics. The leading researchers were also recognized among the 8,721 contributing authors, such as J. D. Lee, D. L. Fisher, J. H. Kim, and K. A. Brookhuis. Finally, the co-citation analysis illuminated the evolution of simulated driving research that covered the following topics roughly in chronological order: task-induced stress, drivers with neurological disorders, alertness and sleepiness while driving, trust toward driving assistance systems, driver distraction, the effect of drug use, the validity of simulators, and automated driving.

Conclusions: This article employed bibliometric tools to probe the contributing countries, institutes, journals, authors, and mainstream hotspots of simulated driving research in the past 20 years. A systematic bibliometric analysis of this field will help researchers realize the panorama of global simulated driving and establish future research directions.     

Hydrocarbon pollution fixed to combined sewer sediment: a case study in Paris

Over a period of two years (2000-2001), sediment samples were extracted from 40 silt traps (STs) spread through the combined sewer system of Paris. All sediment samples were analysed for physico-chemical parameters (pH, organic matter content, grain size distribution), with total hydrocarbons (THs) and 16 polycyclic aromatic hydrocarbons (PAHs) selected from the priority list of the US-EPA. The two main objectives of the study were (1) to determine the hydrocarbon contamination levels in the sediments of the Paris combined sewer system and (2) to investigate the PAH fingerprints in order to assess their spatial variability and to elucidate the PAH origins. The results show that there is some important inter-site and intra-site variations in hydrocarbon contents. Despite this variability, TH and PAH contamination levels (50th percentile) in the Parisian sewer sediment are estimated at 530 and 18 microg g(-1), respectively. The investigation of the aromatic compound distributions in all of the 40 STs has underlined that there is, at the Paris sewer system scale, a homogeneous PAH background pollution. Moreover, the study of the PAH fingerprints, using specific ratios, suggests the predominance of a pyrolytic origin for those PAHs fixed to the sewer sediment.     

Detection of fetal HLA-DQα sequences in maternal blood: A gender-independent technique of fetal cell identification

The objective of this study was to detect fetal HLA-DQα gene sequences in maternal blood. HLA-DQα genotypes of 70 pregnant women and their partners were determined for type A1. We specifically sought couples where the father, but not the mother, had genotype A1. In 12 women, maternal blood samples were flow-sorted. Candidate fetal cells were isolated and amplified by using PCR primers specific for a paternal HLA-DQα A1 allele. Fetal HLA-DQα A1 genotype was predicted from sorted cells; amniocytes or cheek swabs were used for confirmation. Six of twelve sorted samples had amplification products indicating the presence of the HLA-DQα A1 allele; 6/12 did not. Prediction of the fetal genotype was 100 per cent correct, as determined by subsequent amplification of amniocytes or cheek swabs. We conclude that paternally inherited uniquely fetal HLA-DQα gene sequences can be identified in maternal blood. This system permits the identification of fetal cells independent of fetal gender, and has the potential for non-invasive prenatal diagnosis of paternally inherited conditions.     

Assessment of the interrelation between photooxidation and biodegradation of selected polyesters after artificial weathering

Three commercially available biodegradable polymers, two different aromatic-aliphatic copolyesters and polylactic acid, intended for the fabrication of agricultural mulching films, in addition to other applications, were subjected to a series of tests with the aim of studying the relationship between their photooxidation and biodegradation. Photooxidation resulted in the rearrangement of polymeric chains, in the case of both copolyesters the events led to polymeric chain crosslinking and the formation of insoluble polymeric gel. The tendency was significantly more pronounced for the copolyester with the higher content of the aromatic constituent. As regards polylactic acid photochemical reactions were not accompanied by crosslinking but instead provoked chain scissions. A biodegradation experiment showed that, despite marked structural changes, the extent of photooxidation was not the decisive factor, which significantly modified the rate of biodegradation in all three materials investigated. The specific surface area of the sample specimens was shown to be more important.     

Variations of periphytic diatom sensitivity to the herbicide diuron and relation to species distribution in a contamination gradient: implications for biomonitoring

Diatoms are commonly used as bioindicators of trophic and saprobic pollution in rivers. However, more knowledge is needed concerning their sensitivity to toxicants such as agricultural herbicides. In this study, seven species of periphytic diatoms were isolated from the Morcille River (Beaujolais area, France) which presents a streamward contamination gradient by pesticides and particularly diuron. The sensitivity of these species to diuron was assessed through ecotoxicological tests based on short-term growth inhibition of monospecific cultures. After application of an appropriate toxicological model, EC50 were determined and the species were ranked according to their tolerance. EC50 values ranged from 4.5 to 19 μg L(-1). Finally, the results were related to field periphyton samples from an upstream and a downstream site in order to check if variations in specific relative abundance between sites are consistent with differences in tolerance to diuron. Species distribution between sites was only partially in accordance with toxicological results suggesting that other factors (toxic or trophic) have an important influence on diatom communities in the river. Nevertheless, diatoms showed their potential to indicate water contamination by pesticides and toxic indices could be developed in complement to existing trophic indices.     

Development of a sampling method for the simultaneous monitoring of straight-chain alkanes, straight-chain saturated carbonyl compounds and monoterpenes in remote areas

Studies have shown that biogenic compounds, long chain secondary compounds and long lifetime anthropogenic compounds are involved in the formation of organic aerosols in both polluted areas and remote places. This work aims at developing an active sampling method to monitor these compounds (i.e. 6 straight-chain saturated aldehydes from C6 to C11; 8 straight-chain alkanes from C9 to C16; 6 monoterpenes: α-pinene, β-pinene, camphene, limonene, α-terpinene, & γ-terpinene; and 5 aromatic compounds: toluene, ethylbenzene, meta-, para- and ortho-xylenes) in remote areas. Samples are collected onto multi-bed sorbent cartridges at 200 mL min(-1) flow rate, using the automatic sampler SyPAC (TERA-Environnement, Crolles, France). No breakthrough was observed for sampling volumes up to 120 L (standard mixture at ambient temperature, with a relative humidity of 75%). As ozone has been shown to alter the samples (losses of 90% of aldehydes and up to 95% of terpenes were observed), the addition of a conditioned manganese dioxide (MnO(2)) scrubber to the system has been validated (full recovery of the affected compounds for a standard mixture at 50% relative humidity--RH). Samples are first thermodesorbed and then analysed by GC/FID/MS. This method allows suitable detection limits (from 2 ppt for camphene to 13 ppt for octanal--36 L sampled), and reproducibility (from 1% for toluene to 22% for heptanal). It has been successfully used to determine the diurnal variation of the target compounds (six 3 h samples a day) during winter and summer measurement campaigns at a remote site in the south of France.