Comparative studies of fungal degradation of single or mixed bioaccessible reactive azo dyes

A screening using several fungi (Phanerochaete chrysosporium, Pleurotus ostreatus, Trametes versicolor and Aureobasidium pullulans) was performed on the degradation of syringol derivatives of azo dyes possessing either carboxylic or sulphonic groups, under optimized conditions previously established by us. T. versicolor showed the best biodegradation performance and its potential was confirmed by the degradation of differently substituted fungal bioaccessible dyes. Enzymatic assays (lignin peroxidase, manganese peroxidase, laccase, proteases and glyoxal oxidase) and GC-MS analysis were performed upon the assay obtained using the most degraded dye. The identification of hydroxylated metabolites allowed us to propose a possible metabolic pathway. Biodegradation assays using mixtures of these bioaccessible dyes were performed to evaluate the possibility of a fungal wastewater treatment for textile industries.     

A fair comparison between the spatial scan and the Besag–Newell Disease clustering tests

Routine surveillance of a large geographic region for clusters of adverse health events, particularly cancers, often involves small area health data, possibly controlling for exposure information. Many different methods have been proposed to test for the presence of geographical clusters. Two of the most popular methods are the spatial scan method proposed by Kulldorff and that using a fixed number of cases within scanning circles proposed by Besag and Newell. Although the second test is very popular, it has some difficulties. While the scan test controls for the multiple testing problem, the Besag and Newell test does not. Additionally, the latter method requires the setting of several tuning parameters whose values affect the test performance and are subjectively chosen by the user. This creates a difficulty to make a fair comparison between the two methods and it explains why there have been few formal studies evaluating their relative performances. In this paper, we modify the Besag and Newell test allowing for the control of the error type I probability and compare its power with respect to that of the spatial scan test. We used data sets from a publicly available simulated benchmark. We found that the two methods have similar results, except for clusters located in sparsely populated regions, where the spatial scan method presented a better performance.     

A new hazard index of complex mixtures integrates bioconcentration and toxicity to refine the environmental risk assessment of effluents

A new methodology to evaluate the overall environmental hazard of unknown mixtures, based on bioconcentration potential and toxicity, was developed using a combination of two methodologies: 1) the estimation of the octanol-water partition coefficient (K(ow)) using reverse-phase high performance liquid chromatography (RP-HPLC) and 2) the toxicity identification evaluation (TIE). Forty seven compounds with known K(ow) and different molecular structures where used for the calibration of the log K(ow) in relation to the retention time in reverse-phase high performance liquid chromatography (RP-HPLC). A linear regression with an R(2)=0.81 and an sd=0.69 was established between log K(ow) and RP-HPLC retention time. This K(ow) estimation method was furthermore validated using seven additional compounds, showing acceptable estimations of the log K(ow) of unknown substances. Two different mixtures were tested, one containing 3,4 Dichloroaniline, Diazinon and 4-Nonylphenol and another one containing a mixture of 16 pesticides. Both mixtures were first tested as a whole effluent and then fractionated and tested, using a miniaturized Daphnia magna test. An equation is presented, that combines both methodologies and establishes a relative hazard index RHI, ranging from 1 to 10 for any particular mixture of chemicals. The results show how the method presented can refine the security factors that could be included in the environmental risk assessment of effluents in the future.     

Variations in circulating hemocytes are affected by age and caste in the stingless bee <Emphasis Type="Italic">Melipona quadrifasciata</Emphasis>

The insect immune system faces various challenges; particularly in social bees, caste system and age polyethism expose individuals to numerous environmental and working conditions. However, little is known about how cellular defenses in social bees may be organized to respond to a variety of immune challenges. Here, we describe the morphological features and the total and differential counts of hemocytes in different female classes (newly emerged workers, nurses, foragers, and virgin queens) of the eusocial stingless bee Melipona quadrifasciata. Granulocytes and prohemocytes were, respectively, the most and the least abundant cells among all classes of females. Furthermore, there were more prohemocytes in virgin queens than in foragers. The total number of hemocytes was smaller in foragers, whereas the largest number was observed in nurse workers. This reduced amount of hemocytes in foragers might allow energy savings to perform colony activities such as foraging and defense. Foragers also had the biggest hemocytes (either prohemocytes, granulocytes, or plasmatocytes) in comparison to the other classes of females, which might have arisen as a compensation for the reduction in number of these cells during aging. These results suggest that profiles of hemocytes of M. quadrifasciata vary according to the caste and age of this eusocial bee.     

Biogas production from slaughterhouse wastewaters and use of biofertilizer obtained for biodegradation of aromatic hydrocarbons

The anaerobic digestion of industrial wastes produces a biogas that is an alternative to the use of fossil fuels for energy production. At the end of this process, the stabilized biomass presents high levels of nutrients, which can be used both as biofertilizers in agriculture and for the biodegradation of contaminants in the soil through improvement of the microbiota. Thus, this study aimed to evaluate biogas production by industrial wastes and to use the biofertilizer for the bioremediation of soils previously contaminated with gasoline. The biomass (420 mL) generated approximately 10 liters (L) of methane and 3 L of other gases. Anaerobic incubation reduced total and volatile solids, as well as biochemical oxygen demand, chemical oxygen demand, and the carbon and nitrogen contents of the biomass. The bioremediation experiment showed that 15 days after contamination with gasoline, the addition of the biofertilizer improved the degradation efficiency of monoaromatic hydrocarbons; however, the degradation of polyaromatic hydrocarbons was less time efficient. So, we conclude that the anaerobic incubation of industrial wastes generates a high amount of biogas, and that biofertilizer deposition into contaminated soil does not affect the efficiency of the degradation of aromatic hydrocarbons after 30 days. Novelty or significance : Anaerobic incubation of industrial wastes generates a high calorific value gas, which can be used as an alternative source of energy. And, the resulting biomass, called biofertilizer, can be used to remediate soils contaminated with hydrocarbons.     

Emissions from the combustion of eucalypt and pine chips in a fluidized bed reactor

Interest in renewable energy sources has increased in recent years due to environmental concerns about global warming and air pollution,reduced costs and improved efficiency of technologies.Under the European Union(EU)energy directive,biomass is a suitable renewable source.The aim of this study was to experimentally quantify and characterize the emission of particulate matter(PM_(2.5))resulting from the combustion of two biomass fuels(chipped residual biomass from pine and eucalypt),in a pilot-scale bubbling fluidized bed(BFB)combustor under distinct operating conditions.The variables evaluated were the stoichiometry and,in the case of eucalypt,the leaching of the fuel.The CO and PM_(2.5)emission factors were lower when the stoichiometry used in the experiments was higher(0.33±0.1 g CO/kg and 16.8±1.0 mg PM_(2.5)/kg,dry gases).The treatment of the fuel by leaching before its combustion has shown to promote higher PM_(2.5)emissions(55.2±2.5 mg/kg,as burned).Organic and elemental carbon represented 3.1 to 30 wt.% of the particle mass,while carbonate(CO_3~(2-))accounted for between 2.3 and 8.5 wt.%.The particulate mass was mainly composed of inorganic matter(71% to 86% of the PM_(2.5)mass).Compared to residential stoves,BFB combustion generated very high mass fractions of inorganic elements.Chloride was the water soluble ion in higher concentration in the PM_(2.5)emitted by the combustion of eucalypt,while calcium was the dominant water soluble ion in the case of pine.     

Determination of plate waste in primary school lunches by weighing and visual estimation methods: A validation study

The aim of this study was to validate the visual estimation method for aggregated plate waste of main dish at Portuguese primary school canteens. For this purpose plate waste at school lunch was measured for 505 individual servings, using weighing individual servings and plate waste and visual estimation method by a 6-point scale, as developed by Comstock et al. (1981). A high variability of initial serving weights was found with serving sizes ranging from 88.9 to 283.3 g and with a coefficient of variation ranging from 5.5% to 24.7%. Mean plate waste was 27.5% according to the weighing method. There was a significant bias in the conversion of the visual waste estimations to actual waste, being overestimated by an average of 8.0 g (ranging from ?12.9 g to 41.4 g). According to Bland and Altman plot, the mean difference between methods was of 8.0 g and the amplitude interval was 102.6 g. The study showed that the visual estimation method is not as accurate as the weighing method in assessing nonselective aggregated plate waste at primary school canteens. Our findings are thus very important on considering plate waste assessment, since the wide variation on initial servings introduces a relevant bias when considering standard portions or a random sample of initial servings. Although, greater convenience, time-saving and the possibility to monitor plate waste of large groups, make the visual estimation method an important method to assess plate waste at school canteens, these results highlighted the need of portions standardization and control of initial servings to allow for its use.     

Performance Assessment of a 3D Hydrodynamic Model Using High Temporal Resolution Measurements in a Shallow Urban Lake

Urban lakes provide many ecosystem services, e.g., flood control, nature protection, coolness island, recreation. Hydrodynamic models will increasingly be used to enhance these benefits. We present the first validation of a three-dimensional (3D) hydrodynamic model on a small shallow lake with high resolution and high frequency measurements. Lake Créteil, France (area 0.4 km², mean depth 4.5 m, and catchment area 1 km²) is a former gravel pit and now part of a regional park. The model Delft3D-FLOW was calibrated on a one-month period, with continuous measurements of temperature at five depths at the center of the lake and at three depths at two other stations, and with current speed profiles at the centre of the lake. The model was then verified on 18 1-month periods with similar temperature measurements. The model reproduced very well the temperature dynamics, including the alternation between mixing and stratification periods and internal wave patterns. The mean absolute errors over the five depths at the central point remained below 0.55^°C in spring and summer, the most favorable seasons for phytoplankton growth. Horizontal temperature differences, which rose up to 3^°C at the beginning of stratification periods, were also well reproduced, as well as current speeds. These results are very promising for assessing nutrient and pollutant diffusion, settling and resuspension, as well as for understanding how phytoplankton blooms start in small shallow lakes.     

Sympatry in grapsoid crabs (genera <Emphasis Type="Italic">Planes</Emphasis> and <Emphasis Type="Italic">Plagusia</Emphasis>) from olive ridley sea turtles (<Emphasis Type="Italic">Lepidochelys olivacea</Emphasis>), with descriptions of crab diets and masticatory structures

Grapsoid crabs of the genera Planes and Plagusia are commonly referred to as “rafting crabs” due to their propensity to live on flotsam and pelagic marine animals. Planes minutus and Planes major (=Planes cyaneus) are epibionts of sea turtles. Occurrences of grapsoid crabs in the genera Planes and Plagusia were evaluated on a total of 27 olive ridley sea turtles, Lepidochelys olivacea, from the eastern tropic Pacific (1998–2001) and the Hawaiian Islands (2002) captured in July–December each year. This is the first report of Planes marinus and Plagusia squamosa on sea turtles, and of P. major, P. marinus, and P. squamosa in sympatry on a confined substrate. Stomach content analyses showed P. major and P. marinus consumed a variety of neuston and marine vegetation, with the former consuming considerably more animal material. Epibiotic P. squamosa consumed mostly plant material. The three Planes species had distinctive differences in gastric mill tooth morphology. The versatile mouthparts of P. marinus are described and resemble those of their congeners. Most female P. major and P. marinus collected were ovigerous and present in all survey months.