Distribution of organochlorine pesticides and heavy metal residues in fish and shellfish from Calicut region, Kerala, India

Fish collected from five different locations from the Calicut region, India were analysed for the levels of organochlorine pesticides (OCPs) and heavy metal (HM) residues in order to elucidate the status of these chemical contaminants in fish and shellfish meant for human consumption. The highest concentrations of OCPs detected in the edible portion of fish were 10.47, 70.57 and 28.35 ng g-1 wet weight, in marine, brackish water and freshwater, respectively. BHC and heptachlor epoxide formed the major share of OCPs in the marine fish while BHCs contributed to the major share in the freshwater and brackish water fish. The DDT (sum of DDT and its metabolites) ranged from 0.05 to 8 ng g-1 in the samples irrespective of the habitat. Among the HMs, Cu, Zn, Mn and Cr were present in the samples irrespective of the place of collection. About 22% of the samples from the freshwater area contained marginally higher lead content above the legal limit of 0.2-0.4 microg g-1. The Cr content ranged from 0.1 to 1.1 microg g-1 in the fish with marginally higher content in the fish from freshwater and marine regions (0.55-1.1 microg g-1). Mercury was detected in the samples (55%) from marine habitat only. The concentrations of OCPs and HMs in the samples, in general, were below the maximum residual level recommended by various organizations.     

An analysis of effects of San Diego wildfire on ambient air quality

The impact of major gaseous and particulate pollutants emitted by the wildfire of October 2003 on ambient air quality and health of San Diego residents before, during, and after the fire are analyzed using data available from the San Diego County Air Pollution Control District and California Air Resources Board. It was found that fine particulate matter (PM) levels exceeded the federal daily 24-hr average standard during the fire. There was a slight increase in some of the gaseous pollutants, such as carbon monoxide, which exceeded federal standards. Ozone (O3) precursors, such as total hydrocarbons and methane gases, experienced elevated concentration during the fire. Fortunately, the absence of sunlight because of the cloud of thick smoke that covered most of the county during the fire appears to have prevented the photochemical conversion of the precursor gases to harmful concentrations of O3. Statistical analysis of the compiled medical surveillance data has been used to establish correlations between pollutant levels in the region and the resultant health problems experienced by the county citizens. The study shows that the increased PM concentration above the federal standard resulted in a significant increase in hospital emergency room visits for asthma, respiratory problems, eye irritation, and smoke inhalation. On the basis of the findings, it is recommended that hospitals and emergency medical facilities engage in pre-event planning that would ensure a rapid response to an impact on the healthcare system as a result of a large wildfire and appropriate agencies engage in the use of all available meteorological forecasting resources, including real-time satellite imaging assets, to accurately forecast air quality and assist firefighting efforts.     

Effect of halides in the electrochemical treatment of distillery effluent

Electrochemical treatment can solve the problems arising due to effluents and offer an effective alternative to the existing methods. An undivided static electrolyser was charged with distillery effluent and the organics were oxidized electrochemically. Anodized graphite plate anodes and graphite cathodes were used for the treatment of distillery effluent. The effect of pH and current density on the treatment was studied. Sodium fluoride, sodium chloride and sodium bromide were chosen as electrolyte and their influence was found out. Complete decolorization has been observed in all cases. A maximum of 93.5% of biological oxygen demand reduction, 85.2% of chemical oxygen demand reduction and 98.0% absorbance reduction were obtained in the presence of sodium chloride as supporting electrolyte. Probable mechanism was also proposed for the oxidation of organics present in the effluent.     

Oxidative environment causes molecular remodeling in embryonic heart—a metabolomic and lipidomic fingerprinting analysis

Environmental Science and Pollution Research - Environmental factors including pollution affect human health, and the unifying factor in determining toxicity and pathogenesis for a wide array of...     

Aminolytic Depolymerization of Polyethylene Terephthalate Wastes Using Sn-Doped ZnO Nanoparticles

Journal of Polymers and the Environment - Poly(ethylene terephthalate) (PET) is one of the most consumed polymers because of its excellent thermal and mechanical properties. By increasing in PET...     

Studies on piston bowl geometries using single blend ratio of various non-edible oils

The depletion of fossil fuels and hike in crude oil prices were some of the main reasons to explore new alternatives from renewable source of energy. This work presents the impact of various bowl geometries on diesel engine with diesel and biodiesel samples. Three non-edible oils were selected, namely pumpkin seed oil, orange oil and neem oil. These oils were converted into respective biodiesel using transesterification process in the presence of catalyst and alcohol. After transesterification process, the oils were termed as pumpkin seed oil methyl ester (PSOME), orange oil methyl ester (OME) and neem oil methyl ester (NOME), respectively. The engine used for experimentation was a single-cylinder four-stroke water-cooled direct-injection diesel engine and loads were applied to the engine using eddy current dynamometer. Two bowl geometries were developed, namely toroidal combustion chamber (TCC) and trapezoidal combustion chamber (TRCC). Also, the engine was inbuilt with hemispherical combustion chamber (HCC). The base line readings were recorded using neat diesel fuel with HCC for various loads. Followed by 20% of biodiesel mixed with 80% neat diesel for all prepared methyl esters and termed as B1 (20% PSOME with 80% diesel), B2 (20% OME with 80% diesel) and B3 (20% NOME with 80% diesel). All fuel samples were tested in HCC, TCC and TRCC bowl geometries under standard injection timing and with compression ratio of 18. Increased brake thermal efficiency and reduced brake specific fuel consumption were observed with diesel in TCC geometry. Also, higher heat release and cylinder pressures with lower ignition delay were recorded with TCC bowl geometry. TCC bowl geometry showed lower CO, HC and smoke emissions with B2 fuel sample than diesel and other biodiesel samples. But, higher NOx emission was observed in HCC and TCC than that in TRCC bowl geometry.

?