Speciation of heavy metals in biosolids of wastewater treatment plants at Mysore,Karnataka, India

Urban wastewater treatment leads to the generation of large quantities of biosolids. Accumulation of biosolids is a problem of environmental relevance due to the existence of heavy metals in the biosolids. Determination of total metal in biosolid provides information relating pollution levels. Determination of their mobilization capacity and behaviour in the environment is an important task. An experimental approach commonly used for studying the mobility, transport and bioavailability of metal in biosolids is the use of selective sequential extraction procedure. In the present study an attempt has been made to study the heavy metal properties in biosolid samples collected from urban wastewater treatment plants located at Mysore, Karnataka. Few heavy metals selected for the present study are cadmium, chromium, copper, iron, nickel and zinc. The concentration of these metals in biosolids and their partition in different fractions are studied. The speciation of metals based on the sequential extraction scheme was carried out. The concentration of heavy metals is lower than that established by European legislation. The residual fraction has the maximum percentage of heavy metals whereas, only a small fraction of heavy metals (Fe, Zn and Cd) are extracted in the most soluble fractions, exchangeable and carbonate fractions.     

Severity analysis of Indian coal mine accidents – A retrospective study for 100 years

A retrospective study on severity analysis of Indian coal mines accidents for 100 years was done considering fatal and serious accidents and the resulting causalities. The impact of recommendations based on safety conferences and committees over the years was studied. An event evaluation algorithm (EEA) was developed for this purpose. The hazard rate functions and cumulative risk functions for major hazards in Indian coal mines were developed. The study evaluated the status of safety level as well as the scope of improvement for Indian coal mines safety.     

Effects of arsenic on reactive oxygen species and antioxidant defense system in tomato plants

In this study, the generation of reactive oxygen species, the induction of oxidative stress, and the response of the antioxidative system in hydroponically grown tomato plants as the cause of arsenic-induced phytotoxicity are investigated. Reduction in plant growth was measured in terms of dry weight and length of roots and shoots, the latter accumulating more arsenic than the roots. The treatment resulted in increased formation of superoxide anion (O₂^.?), H₂O₂, and thiobarbituric acid reactive substances, which indicate augmented lipid peroxidation. Superoxide dismutase, catalase (CAT), and ascorbate peroxidase activities were increased in arsenic-treated tomato plants while CAT activity was insignificantly increased.     

Evolution in mitigation approaches for petroleum oil-polluted environment: recent advances and future directions

Environmental Science and Pollution Research - Increasing petroleum consumption and a rise in incidental oil spillages have become global concerns owing to their aquatic and terrestrial toxicity....     

Studies on Rhizospheric Mycoflora of Tea (Camellia sinensis):In vitro Antagonism with Dominant Bacteria

The rhizospheres of established tea bushes have some specificcharacteristics which are associated with the long lived nature of teaplants,viz.,negative rhizospheric effect,lowering of soil pH,antagonistic activities among microbial communities and dominan…     

Knowledge based ranking algorithm for comparative assessment of post-closure care needs of closed landfills

Post-closure care (PCC) activities at landfills include cap maintenance; water quality monitoring; maintenance and monitoring of the gas collection/control system, leachate collection system, groundwater monitoring wells, and surface water management system; and general site maintenance. The objective of this study was to develop an integrated data and knowledge based decision making tool for preliminary estimation of PCC needs at closed landfills. To develop the decision making tool, 11 categories of parameters were identified as critical areas which could affect future PCC needs. Each category was further analyzed by detailed questions which could be answered with limited data and knowledge about the site, its history, location, and site specific characteristics. Depending on the existing knowledge base, a score was assigned to each question (on a scale 1-10, as 1 being the best and 10 being the worst). Each category was also assigned a weight based on its relative importance on the site conditions and PCC needs. The overall landfill score was obtained from the total weighted sum attained. Based on the overall score, landfill conditions could be categorized as critical, acceptable, or good. Critical condition indicates that the landfill may be a threat to the human health and the environment and necessary steps should be taken. Acceptable condition indicates that the landfill is currently stable and the monitoring should be continued. Good condition indicates that the landfill is stable and the monitoring activities can be reduced in the future. The knowledge base algorithm was applied to two case study landfills for preliminary assessment of PCC performance.     

Synthesis and pesticidal activity of new N-alkyl-N-[1-(2-hydroxyphenyl) ethyl]amines

A series of novel N-alkyl-N-[1-(2-hydroxyphenyl) ethyl]amines were synthesized as potential new agents to control pests. Their structures were confirmed on the basis of IR, NMR and elemental analyses. Six new N-alkyl-N-[1-(2-hydroxyphenyl) ethyl]amines were prepared by reduction of corresponding Schiff bases using sodium borohydride in 80–87 % yields. These compounds were tested for their antifungal activity against two pathogenic fungi viz., Rhizoctonia bataticola ITCC 0482 and Sclerotium rolfsii ITCC 5226 and for insecticidal activity against insects of stored grain pest Callosobruchus analis. Fungicidal bioassay revealed that compound N-Decyl-N-[1-(2-hydroxyphenyl)ethyl]amine, was highly effective against R. bataticola (ED₅₀ 6.86 mg L^?1) which was comparable with that of commercial fungicide hexaconazole (ED₅₀ 6.35 mg L^?1). Also compounds N-Heptyl-N-[1-(2-hydroxyphenyl)ethyl]amine, N-Octyl-N-[1-(2-hydroxyphenyl)ethyl]amine and N-Nonyl-N-[1-(2-hydroxyphenyl)ethyl]amine displayed promising fungitoxicity against same pathogen. However, compound N-Heptyl-N-[1-(2-hydroxyphenyl)ethyl]amine was also found to be effective against S. rolfsii (ED₅₀ 4.92 mg L^?1 as against 1.27 mg L^?1 for hexaconazole). Compound N-Hexyl-N-[1-(2-hydroxyphenyl)ethyl]amine was most effective as insecticide followed by compound N-Octyl-N-[1-(2-hydroxyphenyl)ethyl]amine. LC₅₀ values for these compounds were 155.0 and 275.0 mg L^?1 respectively as against 36.70 mg L^?1 for commercial insecticide dichlorovos. The results obtained from bioassays indicate that this class of compounds can be utilized for the design of new substances endowed with pesticidal activities.     

Treatment of poly- and perfluoroalkyl substances in groundwater using a carbon-based micro-adsorbent and ceramic membrane filtration

This article presents the results of an Environmental Security Technology Certification Program (ESTCP) demonstration conducted at Horsham Air Guard Station and the former Willow Grove Naval Reserve Station in Horsham, Pennsylvania. The ESTCP project information can be found here: https://www.serdp-estcp.org/projects/details/568c0487-f182-40c1-9d4d-9297f4bbedda/er19-5181-projcet-overview . The technology demonstrated, identified as the AquaPRS™ system, employs a carbon-based micro-adsorbent suspension to adsorb polyfluoroalkylated substance (PFAS), which is subsequently filtered using a ceramic membrane filter. A prototypical AquaPRS system was specifically designed and implemented to treat per- and PFAS-contaminated water resources at a fidelity level that could be replicated at other US Department of Defense sites. The objective of the project was to demonstrate and validate the application of the adsorption and separation treatment approach to reduce the total life-cycle cost of treating PFAS-impacted groundwater. The results of the demonstration showed that the AquaPRS technology provides an alternative to granular activated carbon (GAC) and ion exchange (IX) systems based on treatment efficacy and cost performance using lifecycle cost analyses. Pretreatment included cloth media filtration with a nominal 5 µm particulate rejection rating to remove sediment from the surface water treated during the Horsham evaluation. Prefiltration was not necessary for treating the Willow Grove groundwater due to the lower raw turbidities. The micro-adsorbent was added to the system to maintain a suspension between 1 and 50 g/L in the sorbent chamber at reaction times from 5 to 20 min. Treated effluent was separated from the sorbent slurry matrix using the ceramic membrane filter, with the slurry returned to the sorption reactor. The first study conducted at Horsham Air Guard Station demonstrated and validated the AquaPRS treatment approach using a mobile pilot system, while the second study (conducted at the former Naval Reserve Air Station at Willow Grove) provided further optimization of cost, performance, and scalability. At Horsham, 13 tests were conducted over 9 months using a dual-train pilot with each test evaluating two separate conditions. The first 10 tests were conducted with treatment systems in parallel and the remaining three were conducted in series. At Willow Grove, five tests were conducted over a 6-month period for a total of 10 individual test conditions. Three tests were performed in parallel with two operated in series. Tests conducted at Horsham evaluated the performance of the AquaPRS system at different hydraulic detention times (5–120 min), sorbent mass (10–430 g), sorbent densities (0.5–40 g/L), and flowrates (0.1–1 L/min). At Willow Grove, the range of these parameters was further narrowed with hydraulic detention times from 10 to 20 min, sorbent mass from 100 to 200 g, sorbent density from 10 to 25 g/L, and flowrate from 0.67 to 1 L/min. AquaPRS was validated by quantifying the specific adsorption rate (SAR) of various PFASs on the micro-adsorbent and comparing it to values derived for GAC and IX from the same water matrix. The costs of the three treatment systems were compared to estimate a payback period for the AquaPRS system compared to GAC and IX. At 10% breakthrough, the SAR of AquaPRS for the combined concentration of the United States Environmental Protection Agency's Third Unregulated Contaminant Monitoring Rule (UCMR3) PFASs was nearly 300 times higher compared to those treated with GAC. At 40 ng/L breakthrough for combined UCMR3 compounds, a single-stage AquaPRS system at Horsham achieved 146 µg PFAS/g sorbent SAR, while a dual-stage system at Willow Grove achieved 2128 µg PFAS/g sorbent. The AquaPRS system showed a breakeven period of 8 months compared to a similarly designed GAC system in the Horsham evaluation using the observed adsorption rates. In the Willow Grove test case, a 24–36-month breakeven period was determined for the AquaPRS technology when compared to the highest sorption rates observed among five previously tested IX resins. The AquaPRS benefits in comparison to GAC/IX include effective performance in the presence of co-contaminants, adaptability to changing conditions, limited downtime for sorbent replacement, resistance to biofouling, small footprint, and reduced disposal requirements. The lower waste production rates are due to the AquaPRS' ability to dewater the spent sorbent resulting in a waste generation of just 0.002% of the total volume of water treated. Based on the treatment efficacy and cost performance, the AquaPRS system is positioned as an alternative to GAC and IX systems.     

COVID-19 and increasing demand for medical oxygen: can impurity be a problem?

Environmental Science and Pollution Research -     

Occupational injury and accident research: A comprehensive review

In this paper, a comprehensive review of the concepts of occupational injury and accident causation and prevention is presented. Starting with hazard identification, the issues on risk assessment, accident causation, and intervention strategies are discussed progressively. The distinctiveness and overlaps in accident and injury research are highlighted. Both empirical research in terms of hypotheses tested and theoretical research such as accident causation models are compared and contrasted. Finally, based on the critical appraisal of the comprehensive review, future research directions on occupational injury research are delineated.