Spatio-temporal variability in fatty acid trophic biomarkers in stomach contents and muscle of Iberian sardine (<Emphasis Type="Italic">Sardina pilchardus</Emphasis>) and its relationship with spawning

Temporal variation in the fatty acid (FA) composition of stomach contents of Iberian sardines was compared to the relative contribution to dietary carbon made by different prey types for fish from two areas off Portugal. The effect of the FA content of the diet on sardine muscle FA composition was also studied, aiming at (1) analysing if FA biomarkers can be used as a complementary technique for the study of sardine diet and (2) to relate spatial and temporal variations of prey FA content with sardine condition and reproduction. Significant spatial differences in the FA composition of sardine diet occurred with concentrations of n-3 polyunsaturated FA, namely eicosapentaenoic acid [EPA, 20:5n-3] and linolenic acid 18:3n-3, being significantly higher in the diet of sardines from the west coast, whilst the diet of sardines from the south coast was richer in monounsaturated fatty acids (MUFA), namely the carnivory biomarker oleic acid 18:1n-9. These results are in agreement with the higher contribution made by diatoms and dinoflagellates to the diet of sardines off the west coast. Spatial variation in sardine dietary FA was also detected in their muscle composition, specifically for EPA, and the eicosapentaenoic/docosahexaenoic acid and (n-3)/(n-6) ratios, which were higher in sardines from the west coast. No difference in FA composition was detected between sexes, and the seasonal variability in sardine total FA concentration was primarily related to the seasonality of spawning. Sardines accumulate high concentrations of FAs during the resting stage of reproduction when the feeding intensity is similar or lower to that observed during the spawning season. Additionally, sardines show a high selective retention of MUFA and polyunsaturated FA (PUFA) throughout the year except at the beginning of the spawning season, when these FAs are largely invested in the formation of the gonads. Therefore, temporal and regional differences of prey environments are strong enough to be reflected in fish body composition, namely on the accumulation of essential FAs, which can have a strong impact on reproduction success for this species.     

Trend der Schwermetall-Bioakkumulation 1990 bis 2005: Qualitätssicherung bei Probenahme, Analytik, geostatistischer Auswertung

Background, aim and scope Since 1990, the UN ECE Heavy Metals in Mosses Surveys provide data inventories of the atmospheric heavy metal bioaccumulation across national boundaries in Europe. The results prove how air pollution control in Germany and in all of Europe affected the bioaccumulation of metals in those ecosystems that are not directly influenced by nearby emission sources. This article focuses on the assessment of spatiotemporal patterns of the metal bioaccumulation in Germany since 1990. Furthermore, the spatial variance of the metal bioaccumulation is analysed with regard to sampling site-specific and regional land characteristics. Special focus hereby relies on the correlation of the metal concentration in mosses and in depositions. Hence, the moss surveys contribute to §?12 of the German Federal Nature Conservation Act as well as to the “Convention on Long-range Transboundary Air Pollution” (CLRTAP). Materials and methods The bioaccumulation of up to 40 trace elements in mosses was determined according to a European wide harmonised methodology. The according experimental protocol regulates the selection of sampling sites and moss species, the chemical analysis and quality control and the classification of the measured values for the mapping of spatial patterns. In Germany all sampling sites were described with regard to topographical and ecological criteria as well as other aspects seen as relevant in the mandatory guideline. Together with the measurements this metadata was combined with other information regarding emissions and land use in the surroundings of the sampling sites in the WebGIS MossMet. The spatial structure of the metal bioaccumulation was analysed and modeled by variogram analyses and then mapped by applying different kriging techniques. Furthermore, different multi-metal indices (MMI) were derived for both the sampling sites and raster maps with the help of percentile statistics: The MMI1990 aggregates the data for Cr, Cu, Fe, Ni, Pb, Ti, V and Zn determined in 1990. The MMI1995, MMI2000, MMI2005 furthermore include As, Cd, Hg and Sb for 1995, 2000 and 2005, respectively. Two other MMI allow for a time integrating view on the metal bioaccumulation in Germany: The MMI1990–2005 was calculated on behalf of all measured/geostatistically estimated data for Cr, Cu, Fe, Ni, Pb, Ti, V and Zn. Therefore the integrated assessment of the metal bioaccumulation in Germany from 1990 to 2005 is possible. The MMI1995–2005 furthermore includes the element-specific data of As, Cd, Hg and Sb therefore integrating 12 elements over the last three surveys. The statistical association of the metal bioaccumulation, site-specific characteristics as well as information on land use and emissions was analysed by bivariate correlation analysis and multivariate decision tree models (Classification and Regression Trees – CART, Chisquare Automatic Interaction Detection – CHAID). Results The results of the quality-controlled chemical analyses show a significant decrease of the metal bioaccumulation in Germany from 1990 to 2000. From 2000 to 2005 a further decrease can be stated for Hg, Pb and Ti. However, a significant increase for Cd, Cr, Cu, Sb and Zn can be observed. This especially holds true for Cr (+ 160?%) that almost reaches as high concentrations in mosses as in 1990. In 2005, the metal loads in mosses, except for Cr, show spatial distributions similar to those in 1990, 1995 and 2000. Hot spots are mostly found in the urbanised and industrially influenced Ruhr Area, the densely populated Rhine–Main region and in the industrially influenced regions of former East Germany (e.?g. Halle–Leipzig region). The spatial variance of the metal bioaccumulation can mainly be explained by site-specific (moss species, canopy drip effects) and site-surrounding (land use, depositions, emissions) characteristics. Discussion High Cr loads in mosses were also registered in other European countries like in Switzerland. Further investigation is therefore necessary to investigate whether this is due to different emission conditions or biogenic effects (e.?g. as a result of increasing nitrogen depositions). Compared to other environmental monitoring and modelling programmes the moss surveys registered increasing concentrations of toxic metal elements between 1990 and 2005. Contrary to deposition measurements that exhibit a higher temporal resolution the moss surveys provide measurement data on a wide range of elements. Some of these elements are important with regard to human-toxicological aspects (e.?g. Hg, Sb, As, Al, V). The standardised biomonitoring of atmospheric pollution by mosses is an important link between the technical acquisition of depositions and the accumulation in biological material. To claim that the element concentrations in mosses and in the deposition should correlate to a high degree is not appropriate since both approaches are physically related but are not identical. The degree of correlation thereby depends on the boundary conditions of the physical processes, like regional and site-specific meteorological conditions within the accumulation period, the vertical and horizontal vegetation structure or land use conditions. Conclusions The moss surveys contribute to the heavy metal and multi-component model of CLRTAP because they prove on different spatial scales how air pollution control influences the accumulation of emitted substances in environmental subjects of protection like vegetation. If environmental monitoring is seen as a continuous task and the applied methodology works well as an early warning system then environmental policy is enabled to act in preventative sense and to pursue unexpected developments. No other environmental monitoring programme provides such a wide range of ecotoxically relevant elements measured as spatially dense as the case for the moss surveys. The spatial distribution of environmental information is an essential criterion for their usability in terms of political measures for the federal states and the federation. Recommendations and perspectives The Heavy Metals in Mosses Surveys are a positive example for environmental monitoring activities reaching across three spatial and administrative levels: regional (e.?g. federal state or natural landscape), nationwide (e.?g. Germany) and continental (e.?g. Europe). In Germany the harmonised and quality-controlled moss data are made available via an internet-based webGIS portal. Therefore the moss data may easily be accessed for environmental monitoring purposes and the control of environmental political actions. Hence, the monitoring of Heavy Metals by Mosses Surveys is an important task among the European environmental observations, which should be continued in future for scientific and political reasons in its current extent.     

Polynuclear Hydrocarbon Emissions from Selected Industrial Processes

A number of selected industrial processes considered as potential sources of benzo{a)- pyrene and other polynuclear hydrocarbons were surveyed. Polynuclear hydrocarbon emission levels were measured directly for asphalt hot road mix preparation and asphalt airblowing. Emissions of other pollutants, including particulate matter, carbon monoxide, and total gaseous hydrocarbons were also measured, and are reported together with pertinent data on process design and operation. Results are discussed with reference to the type of process; the type of equipment used, including control devices; and other factors. The significance of some additional processes as contributors of polynuclear hydrocarbons was examined indirectly by collecting atmospheric samples of polynuclear hydrocarbons in residential areas in the vicinity of (1) a carbon black manufacturing area, (2) a steel and coke manufacturing area, (3) an organic chemical industry complex, and (4) a residential and small-industry coal burning area.     

Klimawandel und zukünftig mögliche temperaturgesteuerte Malariatransmission in Deutschland

Background, aim and scope On behalf of the Centre of Excellence for Climate Effects and Adaption (KomPass) of the German Federal Environment Agency (UBA) an Expert Information System on Climate Change and Adaption (FISKA) was developed. FISKA shall provide the governmental institutions with basic information and models on climate change impacts for the development and accomplishment of adaption strategies. In this paper the impact model on potential temperature-dependent malaria transmissions is presented. It shows how, together with the REMO and WettReg climate models implemented in FISKA, areas at risk of malaria can be identified. Materials and methods FISKA was developed as an open and modular expert information system and allows the exchange of data and information with other institutions. Climate change impacts are implemented as calculation engines. The system allows for implementing additional data and impact models to improve existing impact models. For the calculation of the temperature-dependent potential secondary malaria infections the basic reproduction rate was used and the according algorithms were implemented in two calculation engines. One engine allows the calculation of the secondary infections and the other allows the calculation of the seasonal transmission gates. Measured air temperatures for the period 1961–2007 were provided by the German Meteorological Service (DWD), data on future air temperatures were extracted from the climate models REMO and WettReg for the climate reference periods 1991–2020, 2021–2050, and 2051–2080. The respective secondary infections and the resulting seasonal transmission gates for each period were regionalised on the basis of an ecological land classification to analyse significant ecoregional differences. Results Comparing the climate reference period 1961–1990 and the following period 1991–2007, the proportion of Germany featuring a potential seasonal malaria transmission gate of one or rather two months has been reduced in favour of a three months transmission gate. Accordingly, in the period 1991–2007 malaria transmissions during three months are possible on 70?% of the German territory instead of 26?% in 1961–1990. The percentage of a four months transmission gate has increased from 0.02?% to 0.76?%, and even a five months transmission is possible on 0.15?% of Germany. For future periods the number of potential secondary infections increases and further extensions of the seasonal transmission gates were revealed. In case of REMO A1B in 2051–2080, almost whole Germany features thermal conditions allowing malaria transmissions during four or rather five months. Discussion Rising air temperatures lead to changes in the spatial structure of the ecological elementary factor temperature, which can, under otherwise identical conditions, facilitate the reproduction of pathogens (here Plasmodium vivax) and vectors (here Anopheles atroparvus) as well as the spread of diseases. The basic reproduction rate serves the calculation of secondary malaria infections, which are the infections of host by a vector under the assumption that every member of the host population is susceptible for the pathogen. Improved thermal conditions alone do not necessarily imply the development of a malaria epidemic. Other factors like population density or medical care and the presence of vector habitats are of major importance, however, not considered by the calculation engines. The example of malaria is intended to be a model for a range of temperature-dependent vector-borne diseases. Conclusions The impact model on temperature-dependent malaria infections shows exemplarily the information content and functionality of FISKA. Data and functionality of FISKA serve as an expert information system for the detection of risks due to climate change. The results can be published as interactive maps via the FISKA internet interface. From a technical point of view, every impact model based on a calculation engine can be implemented and published via the web interface, provided that the impact models and the resulting risk maps rely on scientific reliable assumptions and are documented comprehensively. Recommendations and perspectives An improvement of FISKA considering the European scale is technically possible. It would require the development of GIS- and model applications on the basis of Europe-wide basic and specific data. For small-scale model runs a dynamic modelling of the water balance including soil hydrology as well as consideration of microclimate effects are required.     

Fuel consumption and associated emissions from seagoing ships at berth derived from an on-board survey

A methodology is presented to estimate the emissions of ships at berth based on their actual fuel consumption and the fuel quality. Accurate estimates of emissions from ships at berth demand reliable knowledge of the fuel consumption while at berth and associated fuel characteristics. However, assured information about energy use and fuel consumption of seagoing ships at berth is scarce. Proper estimation of ship emissions at berth is crucial for understanding the impact of shipping emissions on air quality and health in harbour cities as well as for a proper evaluation of the impact of abatement measures such as shore-side electricity and/or restrictions of sulphur content for shipping fuels to be used in ports. Therefore, a survey of energy consumption and fuel use on board of 89 seagoing ships was made in close cooperation with the Port of Rotterdam. Rotterdam is the major port of Europe ensuring that the results will have relevance for the larger European domain. On board of the ships at berth, a questionnaire was filled in by the chief engineer of that particular ship, assisted by two former mechanical shipping engineers employed at our organization. Survey results as well as the emission estimations are compared to the (scarce) information that is available and expert judgements in recent studies. The compiled survey data underlie the current Dutch emission estimation methodology for emissions of ships at berth.     

Atmosphärische Deposition und Anreicherung von Schwermetallen und Stickstoff in Natura-2000-Gebieten Deutschlands

Purpose Under the Convention on Long-range Transboundary Air Pollution mosses are used to map the bioaccumulation of heavy metals and nitrogen throughout Europe. To this end, since 1990 mosses were sampled and analyzed chemically every five years. The goal of this article is to apply the moss survey data for assessing the bioaccumulation of Cd, Pb and N in German Natura 2000 Sites of Community Importance (SCI). Methods The temporal trends of the heavy metal bioaccumulation within SCIs were analyzed using a multi metal index (MMI) calculated by means of geostatistics and percentile statistics. For nitrogen, only monitoring values for 2005 were available for the assessment. The geostatistically estimated values of the metal and nitrogen concentrations in mosses were transformed to estimated deposition values by use of regression analyses. Subsequently, the results were integrated into the assessment of the German SCIs. Results Highest metal loads within SCIs were detected in 1990, followed by a continuous decrease to 2000 and a significant increase until 2005. Regarding N, a median of 1.5?% nitrogen in the dry mass was calculated. The deposition values calculated from the moss estimates resulted in median values of 0.33?g/ha/a for Cd, 8.2?g/ha/a for Pb and 16.7?kg/ha/a for nitrogen. Conclusions The Moss-Monitoring is the only environmental monitoring programme which enables statistically sound estimations of the exposure of SCI to environmental contaminants in terms of heavy metal and nitrogen deposition and bioaccumulation.     

Practitioner insights as a means of setting a context for conservation

A key obstacle to conservation success is the tendency of conservation professionals to tackle each challenge individually rather than collectively and in context. We sought to prioritize barriers to conservation previously described in the conservation literature. We undertook an online survey of 154 practitioners from over 70 countries to ascertain the most important barriers to conservation they faced. We used statistical analyses to identify the key impediments to conservation success and to examine whether these were affected by organizational attributes. Twenty-one barriers were identified. The importance ascribed to those was influenced by continent of operation and organization size, but not by organization age or autonomy (from larger parent organizations). We found the most important barriers to consider when undertaking conservation action were wider issues (e.g., population growth, consumerism, favoring development, and industrial-scale activity), operating environment (e.g., lack of political will, ineffective law enforcement, weak governments, corruption, safety and security), community attributes (e.g., dynamics, conflicts, and education levels), and the way conservation is undertaken (overconfidence, lack of funding, and externally set agendas). However, we advise against applying a one-size-fits-all approach. We propose that conservationists account for the complex socioecological systems they operate in if they are to achieve success.