Quantification of solid waste management system efficiency using input–output indices

Journal of Material Cycles and Waste Management - The assessment of solid waste management systems is vital for continued improvement in the efficiency of waste management systems (WMSs). Many...     

Comparison of surface emissions and subsurface distribution of cis- and trans-1,3-dichloropropne and chloropicrin in sandy field beds covered with four different plastic films

The purpose of this study was to conduct a field study at a Florida field site on surface emissions and subsurface distribution of cis-and trans-1,3-dichloropropene (1,3-D) and chloropicrin (CP) in raised beds injected with Telone C35 with four replications. A total of 16 beds were applied with Telone C35 by chisel injection and covered with four different plastic films, 4 beds for each film. Each bed was installed with five 20-cm long soil pore air probes and a surface air collection pan at arbitrarily locations along the length of each bed for sampling soil pore air and surface air, respectively, for analysis of the three biologically active compounds, cis- and trans-1,3-D and CP. We found that average concentrations of the three compounds at 20-cm depth among the beds covered with four different plastic films generally were not statistically different. Among the four beds covered with the same plastic film, average concentrations of the three compounds were statistically different only in the four metallic PE covered beds at 5 and 24 hours after injection. Volatilization rates of the three compounds among the beds covered with four different plastic films, with the exception of CP at 48 hours after injection, were not statistically different. It appeared that initial upward diffusion and volatilization flux were influenced by solar radiation. Initial subsurface concentrations of the three compounds and volatilization flux, especially cis-1,3-D, were greater in the beds on the east side of the field than that in the beds on the west side of the field. Whether or not difference in initial subsurface concentrations of the compounds between east side beds and west side beds may influence fumigant efficacy remains to be determined.     

Effect of topography on sulfate redistribution in cumulonimbus cloud development

An aqueous chemical module is created and included into a complex three-dimensional atmospheric cloud-resolving mesoscale model. In the chemical module, oxidation of S(IV) by ozone and hydrogen peroxide in cloud-water and rainwater, as important process of the sulfate production is included. To examine the impact of topography on the sulfate redistribution in a clean and a polluted environment, the complex topography of Serbia is included in the model. Numerical simulations of an isolated summer Cumulonimbus cloud shows that thunderstorms generate very strong vertical sulfate redistribution from the planetary boundary layer to the upper troposphere. This redistribution is sensitive to cloud dynamics, while cloud microphysics and precipitation determine wet removal of the chemical species. In simulations with realistic topography, the chemical species are transported over larger distances close to the surface, while in the upper atmosphere, there is no difference compared to the simulations without topography. The sensitivity tests of cloud chemistry to the physical processes are made. Omission of nucleation and impact scavenging of aerosols in the model simulations shows that 75.8 and 62.5 % of total sulfur mass deposited in the base experiment for the clean and the polluted environment, respectively, is the result of other processes. Exclusion of oxidation accounted for 19.2 and 37.7 % of total sulfur deposited for clean and polluted environment. Ignoring the ice phase almost not change mass of deposited sulfur: there is an increase of 2.9 and 1.5 % for clean and polluted atmosphere, respectively. Real topography conditions affect the sulfate redistribution in the sense of greater possibilities of transport. Numerical simulations without real topography give an artificial increase of deposited sulfur mass of about 25?30 %.     

Optimizing the SO2 total emission control strategy: case study—Bor (Serbia)

Mumbai, a megacity of India, and its adjacent marine environment, though heavily stressed from various anthropogenic interferences, harbor ~146 km² of mangrove cover. Manori creek, in the close vicinity of Mumbai, sustains relatively better mangrove formations. A creek habitat had been evaluated for its biological and environmental characteristics, and is compared with similar but relatively lesser stressed Mandovi estuary (~475 km south of Mumbai). Several evidences of deteriorating environment of Manori creek have been described with respect to Water quality index and various biotic community structures. Water quality index of <55 indicated unacceptable aquatic conditions of Manori creek. Dominance of Avicennia marina and poor abundance and diversity of mangrove and associated biological features indicate highly stressed environment. Dominance of stress-tolerant phytoplankton spp. such as Skeletonema costatum and benthic fauna such as Polychaeta further supported the view. The data presented in the present document would help in developing rational approach towards conservation, protection, and sustainable development of mangrove-dominated creek and estuarine wetlands.     

Evaluation of NO(x) flue gas analyzers for accuracy and their applicability for low-concentration measurements

The requirements of the Texas State Implementation Plan of the U.S. Clean Air Act for the Houston-Galveston Ozone Nonattainment Area stipulate large reductions in oxides of nitrogen (NO(x)) emissions. A large number of sources at Dow Chemical Co. sites within the nonattainment area may require the addition of continuous emission monitoring systems (CEMS) for online analysis of NO(x), CO, and O2. At the outset of this work, it was not known whether the analyzers could accurately measure NO(x) as low as 2 ppm. Therefore, NO(x) CEMS analyzers from five different companies were evaluated for their ability to reliably measure NO(x) in the 2-20 ppm range. Testing was performed with a laboratory apparatus that accurately simulated different mixtures of flue gas and, on a limited basis, simulated a dual-train sampling system on a gas turbine. The results indicate that this method is a reasonable approach for analyzer testing and reveal important technical performance aspects for accurate NO(x) measurements. Several commercial analyzers, if installed in a CEMS application with sampling conditioning components similar to those used in this study, can meet the U.S. Environmental Protection Agency's measurement data quality requirements for accuracy.     

Landfill leachate assessment by hydrological and geophysical data: case study NamSon,Hanoi, Vietnam

The main objective of this study was to assess the impact of the NamSon landfill on subsurface geological structure and hydrological environment by geophysical techniques and hydrochemical analysis of surface and groundwater. The electrical resistivity tomography (ERT), self-potential (SP) and very low frequency (VLF) methods were used for the investigation of geological structure near the landfill. Three profiles (900 m long in total) of the two-dimensional ERT, VLF density sections and 180 SP data points scattered throughout the study area near the disposal site constituted the basis of the data used in analysis. Additionally, surface water and groundwater samples were collected from six sites in the area for the chemical analysis. Interpretations of geophysical data show a low resistivity zone (< 15 Ωm), which appears to be a fully saturated zone with leachate from landfill. The results of the geophysical investigations are not always fully confirmed by the results of hydrochemical analysis. The quality of water in the vicinity of the landfill dramatically decreased over the year (2015–2016) and actions should be taken to inverse this negative trend.

     

Ionomics and metabolomics analysis reveal the molecular mechanism of metal tolerance of Pteris vittata L. dominating in a mining site in Thai Nguyen province,Vietnam

Environmental Science and Pollution Research - This study aims to find the interaction between ionome and metabolome profiles of Pteris vittata L., an arsenic hyperaccumulator plant, to reveal its...     

Henry's law constants and mass transfer coefficients for methyl bromide and 1,3-dichloropropene applied to Florida sandy field soil

Methyl bromide, a pre-emergent soil fumigant, is scheduled to be phased out in the US by 2005, with exceptions for critical use. Comparison of some of the physical constants related to distribution and retention for methyl bromide (MBr) to other fumigants yields a useful quantification of possible alternatives. In this study, the atmospheric and subsurface dissipation of methyl bromide as well as (Z)- and (E)-1,3-dichloropropene (1,3-D) isomers in Telone II were examined. The Henry's law constants of the three chemicals at soil temperature and their mass transfer coefficients for movement through an agricultural mulch of UV-resistant, high-density polyethylene (PE) were evaluated using field data. At the soil temperature of 16.4 degrees C, calculated Henry's law constant gave a fumigant ranking of MBr (0.21)>(Z)-1,3-D (0.041)>(E)-1,3-D (0.027). Since rapid subsurface distribution of a fumigant is highly dependent on the amount in the gas phase, the greater value for Henry's law constant implies faster distribution throughout the soil. After distribution through the soil, retention of the fumigant becomes imperative. Calculation of the fumigant's mass transfer coefficients through PE from field data gave a ranking of the three chemicals: MBr (1.08 cm/h)<(E)-1,3-D (3.25 cm/h)<(Z)-1,3-D (4.13 cm/h). With mass transfer coefficients of this magnitude, it was concluded that PE film was an inadequate barrier for retaining these fumigants in an agricultural setting.     

Software for Sustainability Assessment: a Case Study in Quang Tri Province,Vietnam

Sustainable development is a widespread concept. Indicator selection and sustainability assessment are basic methods to analyse the sustainable development process. This study aims to develop a software application to select indicators and to allocate weightings to the indicators and the sub-indexes, so that they can be listed in a sustainability assessment. The Visual Basic software is used to develop a software package based on Delphi, analytic hierarchy, normalization and combination processes. Software for sustainability assessment was developed. Thirty-five indicators are selected as a first step of which eight health indicators and eight environmental ones and their sub-indexes are given weightings. The indicators are normalized. Sub-indexes are combined into a composite sustainable development index. The model is validated showing the ‘main features’ of the sustainability situation on health and environmental aspects in the Quang Tri province during the period 2000–2005. The results support the decision-making process of the competent authorities.     

Antibiotic and antiparasitic residues in surface water of urban rivers in the Red River Delta (Hanoi,Vietnam): concentrations,profiles, source estimation,and risk assessment

Environmental Science and Pollution Research - Antibiotic residues and antimicrobial resistance in surface water are issues of global concern, especially in developing countries. In this study, the...