Determinants of male reproductive success in American black bears

We determined annual male reproductive success in black bears (Ursus americanus) using DNA and field data from two populations in New Mexico. We identified the likely father for 78 of 120 genotyped cubs born during 1994–2000 and calculated reproductive success for 102 males known or presumed present within designated mating regions. Age was a strong determinant of reproductive success. The observed peak in reproductive success occurred at roughly the same intermediate age (10 years) as milder peaks in body size characteristics (11–12 years) and frequency of bear-inflicted wounds (13 years), suggesting body size and fighting might be important for mating. Success was negatively associated with the distance between home range centers of males and mothers. Success of young males (<7 years old) was also negatively associated with mature male (≥7 years old) density, and increasing density shifted the peak age of reproduction higher. The dispersed distribution of females likely limited the capacity of large mature males to dominate reproduction; therefore, success was determined by a complex set of variables.     

Optimization of esterification of fatty acid rubber seed oil for methyl ester synthesis in a plug flow reactor

To date, non-food vegetable oil has been considered as the primary source for biodiesel production. Rubber seed oil has high acid value (34 mgKOH/g) and can be used for biodiesel synthesis. The purpose of this study was to investigate esterification of fatty acid, which derived from rubber seed oil, in a plug flow reactor system at high temperature and low methanol consumption. Response surface methodology was applied for design experiment and optimization of esterification reaction. Temperature, methanol consumption, and sulfuric acid were chosen as variables to examine their influence in a conversion to methyl ester. At 140°C, at 5:1 methanol to fatty acid ratio (by mole), H₂SO₄ 1.5 (%v/w), and space time 20 min, the conversion to methyl ester attained 98.2%. Fourier transform infrared spectroscopy (FTIR) and gas chromatography-Mass spectrometry (GC-MS) were used for analysis and to confirm the formation of methyl ester. Methyl ester was characterized for biodiesel fuel properties in accordance to ASTM standard.     

Dioxin contamination in soils of Southern Vietnam

Dioxin is the common name for polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs), and is abbreviated as PCDD/Fs. In the case of Southern Vietnam, is of high concern dioxin contamination in the areas affected by past-use chemical defoliants. Our study related to the zone considered as a "hot spot"--Bien Hoa Airbase and surrounding areas (Bien Hung Lake). Although the war ended over 30 years ago, the adverse effects on this territory still continue. Soil and sediment were selected for our research as they act as a sink for PCDD/Fs. The samples were taken and analyzed in CECOTOX laboratory following certified procedures. The total amounts of PCDD/Fs (2,3,7,8 related congeners) in the samples were converted into WHO-TEQ and compared with standard values proposed by Canadian environmental quality guidelines. The obtained data shows a relatively high risk (up to 20.4 times higher than (probable effect level) PEL value for sediment and 46 times higher than standard value for soil). The research is continuing on the assessment of dioxin transport in food chain. Moreover, considering the obtained data a complete solution should be found urgently to solve the problem of dioxin contamination in the studied areas.     

Does tradeoff between financial and social indicators matters in environmental consideration: evidence from G7 region

The study tries to discover the impact of financial and social indicators’ growth towards environmental considerations to understand the drivers of economic growth and carbon dioxide emissions change in G7 countries. The DEA-like composite index has been used to examine the tradeoff between financial and social indicator matters in environmental consideration by using a multi-objective goal programming approach. The data from 2008 to 2018 is collected from G-7 countries. The results from the DEA-like composite index reveals that there is a mixed condition of environmental sustainability in G-7 countries where the USA is performing better and Japan is performing worse among the set of other countries. The further result shows that the energy and fiscal indicators help to decrease the dangerous gas emissions. Divergent to that, the human and financial index positively contributes to greenhouse gas emissions. Fostering sustainable development is essential to successfully reduce emissions, meet established objectives, and ensure steady development. The study provides valuable information for policymakers.

     

Phthalic acid esters (PAEs) in workplace and house dust from Vietnam: concentrations,profiles, emission sources,and exposure risk

Environmental Science and Pollution Research - The occurrence of nine phthalic acid esters (PAEs) were determined in indoor dust samples collected from vehicle repair shops, waste processing...     

草酸促进双酚A在黏土矿物悬浮液中光降解研究

选择两种常见的天然黏土矿物高岭石和蒙脱石,研究了有机污染物双酚A(BPA)在其表面的吸附及草酸对黏土矿物悬浮液中BPA光降解的影响.结果表明,BPA在两种黏土矿物表面的吸附量较小,吸附符合Langmuir等温式.在250W金属卤化物灯(λ≥360nm)照射下,草酸可显著促进BPA在高岭石和蒙脱石悬浮液中的光降解,降解动力学符合Langmuir-Hinshelwood方程. 降解速率受pH值的影响较大,pH=4.0时速度最快,光降解速率同时受草酸浓度的影响.最后,通过分析矿物中铁的化学环境及反应过程中铁浓度变化,分析了草酸促进BPA在黏土矿物悬浮液中光降解的可能机制.     

Antifungal efficiency assessment of the TiO2 coating on façade paints

The work studies the photocatalytic activity and the antifungal efficiency of the TiO₂/Zn-Al coatings placed on the target commercial façade paints. The photocatalytic active nanocomposite based on TiO₂ and Zn-Al-layered double hydroxides (ZnAl-LDHs) was synthesized by a wet impregnation technique with 3 % w/w TiO₂. The freshly prepared suspension was applied by spray technique on the surfaces of the white façade paints. The goal of the work was to develop a method that quickly quantifies the antifungal activity of the commercial façade paints with and without biocidal components covered with a photocatalytic coating. The essence of the proposed method is the monitoring of the fungal growth (artificial ageing conditions) and the quantification of its development (UV-A 0.13 mWcm^?2) on the façade paint surfaces. A special fungus nutrient (potato dextrose agar (PDA)) was inoculated with the spores of the Aspergillus niger ATCC 6275, and the test samples (façade paints with and without photocatalytic coating) were placed on the inoculated nutrient in the petri dishes. The images of the fungal growth on the samples of the facade paints, during a period of 5 days, were imported into Matlab R2012a where they were converted to binary images (BW), based on the adequate threshold. The percentage of the surface coverage was calculated by applying the specifically written program code which determines the ratio of the black and white pixels. The black pixels correspond to the surface covered with hyphae and mycelia of the fungus.     

Polybrominated diphenyl ethers in plastic products,indoor dust,sediment and fish from informal e-waste recycling sites in Vietnam: a comprehensive assessment of contamination,accumulation pattern,emissions, and human exposure

Residue concentrations of polybrominated diphenyl ethers (PBDEs) in different kinds of samples including consumer products, indoor dust, sediment and fish collected from two e-waste recycling sites, and some industrial, urban and suburban areas in Vietnam were determined to provide a comprehensive assessment of the contamination levels, accumulation pattern, emission potential and human exposure through dust ingestion and fish consumption. There was a large variation of PBDE levels in plastic parts of obsolete electronic equipment (from 1730 to 97,300 ng/g), which is a common result observed in consumer plastic products reported elsewhere. PBDE levels in indoor dust samples collected from e-waste recycling sites ranged from 250 to 8740 ng/g, which were markedly higher than those in industrial areas and household offices. Emission rate of PBDEs from plastic parts of disposed electronic equipment to dust was estimated to be in a range from 3.4 × 10^?7 to 1.2 × 10^?5 (year^?1) for total PBDEs and from 2.9 × 10^?7 to 7.2 × 10^?6 (year^?1) for BDE-209. Some fish species collected from ponds in e-waste recycling villages contained elevated levels of PBDEs, especially BDE-209, which were markedly higher than those in fish previously reported. Overall, levels and patterns of PBDE accumulation in different kinds of samples suggest significant emission from e-waste sites and that these areas are potential sources of PBDE contamination. Intakes of PBDEs via fish consumption were generally higher than those estimated through dust ingestion. Intake of BDE-99 and BDE-209 through dust ingestion contributes a large proportion due to higher concentrations in dust and fish. Body weight normalized daily intake through dust ingestion estimated for the e-waste recycling sites (0.10–3.46 ng/day/kg body wt.) were in a high range as compared to those reported in other countries. Our results highlight the potential releases of PBDEs from informal recycling activities and the high degree of human exposure and suggest the need for continuous investigations on environmental pollution and toxic impacts of e-waste-related hazardous chemicals.     

Emissions and distribution of methyl bromide in field beds applied at two rates and covered with two types of plastic mulches

A field experiment was conducted to compare two plastic mulches and two application rates on surface emissions and subsurface distribution of methyl bromide (MBr) in field beds in Florida. Within 30 minutes after injection of MBr to 30 cm depth, MBr had diffused upward to soil surface in all beds covered with polyethylene film (PE) or virtually impermeable film (VIF) and applied at a high rate (392 kg/ha) and a low rate (196 kg/ha). Due to the highly permeable nature of PE, within 30 minutes after injection, MBr volatilized from the bed surfaces of the two PE-covered beds into the atmosphere. The amount of volatilization was greater for the high rate-treatment bed. On the other hand, volatilization of MBr from the bed surfaces of the two VIF-covered beds were negligible. Volatilization losses occurred from the edges of all the beds covered with PE or VIF and were greater from the high rate-treatment beds. Initial vertical diffusion of MBr in the subsurface of the beds covered with PE or VIF was mainly upward, as large concentrations of MBr were detected from near bed surfaces to 20 cm depth in these beds 30 minutes after injection and little or no MBr was found at 40 cm depth. The two VIF-covered beds exhibited greater MBr concentrations and longer resident times in the root zone (0.5–40 cm depth) than corresponding PE-covered beds. Concentrations of MBr in the root zone of the high rate-treatment beds were 3.6–6.1 times larger than the low rate-treatment beds during the first days after application. In conclusion, VIF promoted retention of MBr in the root zone and, if volatilization loss from bed edges can be blocked, volatilization loss from VIF-covered beds should be negligible.