Effect of topography on sulfate redistribution in cumulonimbus cloud development

An aqueous chemical module is created and included into a complex three-dimensional atmospheric cloud-resolving mesoscale model. In the chemical module, oxidation of S(IV) by ozone and hydrogen peroxide in cloud-water and rainwater, as important process of the sulfate production is included. To examine the impact of topography on the sulfate redistribution in a clean and a polluted environment, the complex topography of Serbia is included in the model. Numerical simulations of an isolated summer Cumulonimbus cloud shows that thunderstorms generate very strong vertical sulfate redistribution from the planetary boundary layer to the upper troposphere. This redistribution is sensitive to cloud dynamics, while cloud microphysics and precipitation determine wet removal of the chemical species. In simulations with realistic topography, the chemical species are transported over larger distances close to the surface, while in the upper atmosphere, there is no difference compared to the simulations without topography. The sensitivity tests of cloud chemistry to the physical processes are made. Omission of nucleation and impact scavenging of aerosols in the model simulations shows that 75.8 and 62.5 % of total sulfur mass deposited in the base experiment for the clean and the polluted environment, respectively, is the result of other processes. Exclusion of oxidation accounted for 19.2 and 37.7 % of total sulfur deposited for clean and polluted environment. Ignoring the ice phase almost not change mass of deposited sulfur: there is an increase of 2.9 and 1.5 % for clean and polluted atmosphere, respectively. Real topography conditions affect the sulfate redistribution in the sense of greater possibilities of transport. Numerical simulations without real topography give an artificial increase of deposited sulfur mass of about 25?30 %.     

Optimizing the SO2 total emission control strategy: case study—Bor (Serbia)

Mumbai, a megacity of India, and its adjacent marine environment, though heavily stressed from various anthropogenic interferences, harbor ~146 km² of mangrove cover. Manori creek, in the close vicinity of Mumbai, sustains relatively better mangrove formations. A creek habitat had been evaluated for its biological and environmental characteristics, and is compared with similar but relatively lesser stressed Mandovi estuary (~475 km south of Mumbai). Several evidences of deteriorating environment of Manori creek have been described with respect to Water quality index and various biotic community structures. Water quality index of <55 indicated unacceptable aquatic conditions of Manori creek. Dominance of Avicennia marina and poor abundance and diversity of mangrove and associated biological features indicate highly stressed environment. Dominance of stress-tolerant phytoplankton spp. such as Skeletonema costatum and benthic fauna such as Polychaeta further supported the view. The data presented in the present document would help in developing rational approach towards conservation, protection, and sustainable development of mangrove-dominated creek and estuarine wetlands.     

Satellite monitoring for carbon monoxide and particulate matter during forest fire episodes in Northern Thailand

This study explored the use of satellite data to monitor carbon monoxide (CO) and particulate matter (PM) in Northern Thailand during the dry season when forest fires are known to be an important cause of air pollution. Satellite data, including Measurement of Pollution in the Troposphere (MOPITT) CO, Moderate Resolution Imaging Spectroradiometer aerosol optical depth (MODIS AOD), and MODIS fire hotspots, were analyzed with air pollution data measured at nine automatic air quality monitoring stations in the study area for February–April months of 2008–2010. The correlation analysis showed that daily CO and PM with size below 10 μm (PM₁₀) were associated with the forest fire hotspot counts, especially in the rural areas with the maximum correlation coefficient (R) of 0.59 for CO and 0.65 for PM₁₀. The correlations between MODIS AOD and PM₁₀, between MOPITT CO and CO, and between MODIS AOD and MOPITT CO were also analyzed, confirming the association between these variables. Two forest fire episodes were selected, and the dispersion of pollution plumes was studied using the MOPITT CO total column and MODIS AOD data, together with the surface wind vectors. The results showed consistency between the plume dispersion, locations of dense hotspots, ground monitoring data, and prevalent winds. The satellite data were shown to be useful in monitoring the regional transport of forest fire plumes.     

Indoor air pollution levels in public buildings in Thailand and exposure assessment

Levels of pollutants including PM2.5 and PM2.5 composition (black carbon and water soluble ions), SO(2), NO(2), CO, CO(2), and BTEX (benzene, toluene, ethylbenzene, xylene) were monitored for indoor and outdoor air at a university campus and a shopping center, both located in the Northern suburb of Bangkok. Sampling was done during December 2005-February 2006 on both weekdays and weekends. At the university, indoor monitoring was done in two different air conditioned classrooms which shows the I/O ratios for all pollutants to be below 0.5-0.8 during the weekends. However, on weekdays the ratios for CO(2) and most detected BTEX were above 1.0. The concept of classroom occupancy was defined using a function of the student number in a lecture hour and the number of lecture hours per day. Classroom 2, which had a higher occupancy than classroom 1, was characterized by higher concentrations of most pollutants. PM2.5 was an exception and was higher in classroom 1 (37 microg/m(3), weekdays) as compared to classroom 2 (26 microg/m(3), weekdays) which was likely linked to the dust resuspension from the carpeted floor in the former. Monitoring was also done in the shopping mall at three different sites. Indoor pollutants levels and the I/O ratios at the shopping mall were higher than at the university. Levels of all pollutants measured at the car park, except for toluene and CO(2), were the highest. I/O ratios of the pollutants at the mall were above 1.0, which indicates the relatively higher influence of the indoor sources. However, the black carbon content in PM2.5 outdoor is higher than indoor, which suggest the important contribution from outdoor combustion sources such as the traffic. Major sources of outdoor air pollution in the areas were briefly discussed. Exposure modeling was applied using the time activity and measured pollutant concentrations to assess the exposure of different groups of people in the study areas. High exposure to PM2.5, especially for the people working in the mall, should be of health effect concern.     

Metal speciation in sediment and bioaccumulation in <Emphasis Type="Italic">Meretrix lyrata</Emphasis> in the Tien Estuary in Vietnam

The concentrations of seven toxic metals (cadmium (Cd), nickel (Ni), chromium (Cr), arsenic (As), lead (Pb), copper (Cu), and zinc (Zn)) were determined in sediments and the soft tissues of a bivalve species (Meretrix lyrata) collected from the Tien Estuary in Tien Giang Province, South Vietnam. The total metal concentrations in sediments (mg/kg dry weight) increased as Cd (0.06) < Cu (5.0) < Pb (13.9) < As (16.3) < Ni (24) < Cr (50) < Zn (62). Speciation analysis revealed that these metals existed mainly in the residual fraction (43–94%), followed by the Fe-Mn oxide-bound (5–35%) and organic/sulfide-bound (0.6–9.2%) fractions. The metal concentrations in M. lyrata (mg/kg dry weight) were in the ranges of 1.3–1.9 (Cd), 1.5–2.8 (Ni), 1.8–3.4 (Cr), 11–16 (As), 0.3–0.6 (Pb), 6.9–8.7 (Cu), and 95–128 (Zn), which are safe for human consumption. The order of the mean biota-sediment accumulation factor (BSAF) of the metals in the non-residual fractions of the sediment for M. lyrata was Cd > Cu > As > Zn > Cr > Ni > Pb. The Risk Assessment Codes (RACs) suggest that the highest mobility of Cd (with RAC = 37%) poses greater environmental risk to aquatic biota. Correlation analysis results show that M. lyrata can be used as a biomonitor of Cd and Cu pollution in the exchangeable, acid-soluble, and non-residual sediment fractions.     

The potential environmental risks of pharmaceuticals in Vietnamese aquatic systems: case study of antibiotics and synthetic hormones

Presently, many pharmaceuticals are listed as emerging contaminants since they are considered to be great potential threats to environmental ecosystems. These contaminants, thus, present significant research interest due to their extensive use and their physicochemical and toxicological properties. This review discusses a whole range of findings that address various aspects of the usage, occurrence, and potentially environmental risks of pharmaceuticals released from various anthropogenic sources, with emphasis on the aquatic systems in Vietnam. The published information and collected data on the usage and occurrence of antibiotics and synthetic hormone in effluents and aquatic systems of Vietnam is reported. This is followed by a potential ecological risk assessment of these pollutants. The extensive use of antibiotics and synthetic hormones in Vietnam could cause the discharge and accumulation of these contaminants in the aquatic systems and potentially poses serious risks for ecosystems. Vietnam is known to have extensively used antibiotics and synthetic hormones, so these contaminants are inevitably detected in aquatic systems. Thus, an appropriate monitoring program of these contaminants is urgently needed in order to mitigate their negative effects and protect the ecosystems.     

Comparison of surface emissions and subsurface distribution of cis- and trans-1,3-dichloropropne and chloropicrin in sandy field beds covered with four different plastic films

The purpose of this study was to conduct a field study at a Florida field site on surface emissions and subsurface distribution of cis-and trans-1,3-dichloropropene (1,3-D) and chloropicrin (CP) in raised beds injected with Telone C35 with four replications. A total of 16 beds were applied with Telone C35 by chisel injection and covered with four different plastic films, 4 beds for each film. Each bed was installed with five 20-cm long soil pore air probes and a surface air collection pan at arbitrarily locations along the length of each bed for sampling soil pore air and surface air, respectively, for analysis of the three biologically active compounds, cis- and trans-1,3-D and CP. We found that average concentrations of the three compounds at 20-cm depth among the beds covered with four different plastic films generally were not statistically different. Among the four beds covered with the same plastic film, average concentrations of the three compounds were statistically different only in the four metallic PE covered beds at 5 and 24 hours after injection. Volatilization rates of the three compounds among the beds covered with four different plastic films, with the exception of CP at 48 hours after injection, were not statistically different. It appeared that initial upward diffusion and volatilization flux were influenced by solar radiation. Initial subsurface concentrations of the three compounds and volatilization flux, especially cis-1,3-D, were greater in the beds on the east side of the field than that in the beds on the west side of the field. Whether or not difference in initial subsurface concentrations of the compounds between east side beds and west side beds may influence fumigant efficacy remains to be determined.     

Atmospheric heavy metal deposition in Northern Vietnam: Hanoi and Thainguyen case study using the moss biomonitoring technique,INAA and AAS

Background, aim, and scope  

The moss technique is widely used to monitor atmospheric deposition of heavy metals in many countries in Europe, whereas this technique is scarcely used in Asia. To implement this international reliable and cheap methodology in the Asian countries, it is necessary to find proper moss types typical for the Asian environment and suitable for the biomonitoring purposes. Such a case study was undertaken in Vietnam for assessing the environmental situation in strongly contaminated areas using local species of moss Barbula indica.     

ELISA detection of multixenobiotic resistance transporter induction in indigenous freshwater Chironomidae larvae (Diptera): A biomarker calibration step for in situ monitoring of xenobiotic exposure

A new simple and sensitive method to distinguish chemically polluted from unpolluted situations in freshwater ecosystems is reported. For this purpose, Chironomus gr thumni larvae were collected from a polluted urban river downstream a sewage treatment plant. For the first time, ELISA assay was used to semi-quantify the multixenobiotic resistance transporters (MXR) in these small pertinent bioindicators. The use of samples immediately fixed in the field gives a delay to isolate larvae and allows multi-sampling along a longitudinal transect in a river at a given time. Results exhibit an induction of MXR proteins in larvae from the polluted river and a deinduction in larvae maintained 11days in unpolluted water. They show new evidences to use midge larvae in biomonitoring environmental programs. They answer to first biomarker calibration steps for the ongoing development of MXR transporters as a detection tool of xenobiotic impacts on bioindicator invertebrates in their freshwater habitats.