Factors influencing food choice by the seaweed-eating marine snail Norrisianorrisi (Trochidae)

Through two-choice gustatory experiments, a␣preference hierarchy was established␣for␣the␣herbivorous gastropod Norrisianorrisi Sowerby, with laminarialean kelps preferred over all other seaweeds. Among the kelps, laminae of Macrocystispyrifera were slightly preferred over Egregiamenziesii, and both were strongly preferred over sporophylls of Eiseniaarborea. E.arborea, the least preferred kelp, was consistently chosen over other algae common in the snail's habitat (Halidrysdioica, Dictyotaflabellata, and Pterocladiacapillacea) and over seaweeds believed to be edible and palatable based on their morphology, structure, and secondary chemistry (Endarachnebinghamiae, Mazzaellaflaccida, and Ulvalobata). The morphologies and structural toughness of tested seaweeds varied significantly as did their nutritional (% carbon, % nitrogen, C:N ratio, and % ash) contents and phlorotannin concentrations; however, snails preferred to feed on kelps regardless of nutritional content, toughness or phlorotannin concentration; and among kelps preferred to feed on the least tough species (based on penetrometer measurements), which also were those containing the lowest phlorotannin concentrations. Preference for kelp was not upheld in experiments using agarose thalli to which freeze-dried powder, of either the kelp Eiseniaarborea or non-kelp Endarachnebinghamiae was added, suggesting the destruction of attractant chemicals during the making of the artificial foods. Our data suggest that the preference of N. norrisi for kelps over other potentially edible and palatable seaweeds may not be related to nutritional content, but instead may have evolved in response to factors such as availability, habitat provision, or refuge from predation. Received: 27 September 1996 / Accepted: 7 October 1997     

Effects of UV radiation of different wavebands on pigmentation, 15N-ammonium uptake, amino acid pools and adenylate contents of marine diatoms

Three marine diatoms Lauderia annulata Cleve, Odontella sinensis (Greville) Grunow and Thalassiosira rotula Meunier were exposed to ultraviolet (UV) radiation of different wavebands under controlled laboratory conditions (0.035 vol% CO₂, 18 °C). Several changes in the patterns of pigments in these organisms were seen depending on the waveband of UV radiation and species examined. UV-B and UV-B plus UV-A radiation led to a reduction in the overall pigment content of all three diatoms. The uptake of ¹⁵N-ammonium was less affected by 5-h UV-A (WG 320) but significantly reduced after UV-B and UV-B plus UV-A exposure. The pattern of free amino acid pools varied depending on the applied UV wavebands and the tested diatom. The main protein-bound amino acids of T. rotula decreased after 5-h UV irradiance except leucine. Contents of adenosine 5′-mono-, di-, and triphosphate (AMP, ADP and ATP) were affected differently by UV radiation; ATP values increased at the end of UV-B and UV-B plus UV-A exposure. These results have been discussed with reference to the impact of the different UV sources and the influence on the nitrogen metabolism in connection to pigments and supply with energy. Received: 13 May 1997 / Accepted: 11 October 1997     

The role of daytime cues in the development of magnetic orientation in a night-migrating bird

To assess the role of celestial rotation during daytime in the development of the magnetic compass course, pied flycatchers (Ficedula hypoleuca Pallas, Muscicapidae) were handraised in Latvia under various celestial and magnetic conditions. Tests were performed during autumn migration in the local geomagnetic field (50 000 nT, 73° inclination) in the absence of celestial cues. A group of birds that had never seen the sky showed a bimodal preference for the migratory southwest-northeast axis, whereas a second group that had been exposed to the natural sky from sunrise to sunset in the local geomagnetic field showed a unimodal preference for the seasonally appropriate southwesterly direction. A third group that had also been exposed to the daytime sky, but in the absence of magnetic compass information, also oriented bimodally along a southwest-northeast axis. These findings demonstrate that observing celestial rotation during daytime enables birds to choose the right end of the migratory axis for autumn migration at the Latvian test location. This transformation of axial behavior into appropriate migratory orientation, however, requires the birds to have simultaneous access to information on both celestial rotation and the geomagnetic field. Received: 19 September 1997 / Accepted after revision: 22 November 1997     

Restricted adaptive cluster sampling

Adaptive cluster sampling can be a useful design for sampling rare and patchy populations. With this design the initial sample size is fixed but the size of the final sample (and total sampling effort) cannot be predicted prior to sampling. For some populations the final sample size can be quite variable depending on the level of patchiness. Restricted adaptive cluster sampling is a proposed modification where a limit is placed on the sample size prior to sampling and quadrats are selected sequentially for the initial sample size. As a result there is less variation in the final sample size and the total sampling effort can be predicted with some certainty, which is impor- tant for many ecological studies. Estimates of density are biased with the restricted design but under some circumstances the bias can be estimated well by bootstrapping. © Rapid Science 1998     

A System for Measuring Vertical Concentration Profiles of Gaseous Pollutants,Using Carbon Dioxide as a Case Study

An electronically-controlled sampling system, characterised by its organ pipe design, has been developed for sampling air sequentially, at different heights within the breathing zone. Data are automatically logged at the different receptor levels, for the determination of the average vertical concentration profile of gaseous pollutants. The system has been coupled to a carbon dioxide monitor and used in a brief study of the spatial and temporal variation of indoor carbon dioxide concentration. The system can easily be extended for different heights or modified for use with other types of gas monitor. The results of a trial run, which was carried out in a coffee room, are presented and applications of the Organ Pipe Sequential Sampling (OPSS) system are discussed.     

Assessment of an accidental vapour cloud explosion: Lessons from the Indian Oil Corporation Ltd. accident at Jaipur,India

On 29 October 2009, at 19:30 IST, a devastating vapour cloud explosion occurred in a large fuel storage area at the Indian Oil Corporation (IOC) Depot in Jaipur, India, generating significant blast pressure. As a consequence of this explosion, the entire installation was destroyed, buildings in the immediate vicinity were heavily damaged, and windowpane breakages were found up to 2 km from the terminal. The IOC estimated that the total loss from the fire and explosion was approximately INR 2800 million.Ironically, as a storage site, the Jaipur terminal was not highly congested, and thus was not considered to have adequate potential for a vapour cloud explosion (VCE). Nevertheless, the prima facie evidences indicate that this was a case of VCE. Therefore, the main objective of this study is to quantify the potential overpressures due to vapour cloud explosions (VCEs) using the Process Hazard Analysis DNV Norway based PHAST 6.51 Software. The results are validated by the extent of the damage that had occurred. The estimation of the VCE shows that a maximum 1.0 bar overpressure was generated in the surrounding area. The initial assessment of the accident data roughly estimates the release mode, time, and amount of vaporized fuel. A more accurate estimate has been obtained by modelling the dispersion of vapour clouds in the surrounding atmosphere, which reveals trends and relationships for the occurrence of vapour cloud explosions.     

Small-scale physical explosions in shock tubes in comparison with condensed high explosive detonations

A series of small-scale experiments involving physical explosions in a 1.6 l pressure vessel was carried out. Explosions were initiated by spontaneous rupture of an aluminium membrane on one side of the vessel at a pressure in the range 1–1.2 MPa. The pressure waves released were measured at different distances along two separate shock tubes, one 10 m long and 200 mm in diameter (closed at one end by the high pressure vessel) and the other 15 m long and 100 mm in diameter.TNT equivalency was used for predicting the blast wave characteristics after vessel rupture. TNT equivalency was used because equations for prediction of peak pressure and impulse of the blast wave in 1-D geometry after detonations of condensed explosives are known. Some experiments with an equivalent amount of real explosive were carried out for comparison with the theoretical and experimental data obtained. The applicability of the TNT equivalency method presented for calculations of maximum pressure and shock wave impulse generated after rupture of the pressure vessel in 1-D geometry is discussed.