Water and soil pollution by Spent lubricating oils

This paper shows that spent lubricating oils from automobile engines generate carboxylic acids on environmental exposure. Samples of exposed oils, isolated from polluted river water and shore muds obtained from various locations, showed a direct proportionality between carboxylic acid content and time of exposure. Carboxylic acids were isolated by solvent extraction and studied by infrared spectroscopy.     

Recent IAEA intercomparison on the determination of trace elements in simulated air filters

Results of a recent intercomparison on the determination of trace elements in simulated air filter samples are reported. A large scatter of results is obtained for some elements and systematic differences between laboratories are observed. The performance of different methods, in particular neutron activation analysis and atomic absorption spectrophotometry, used by the various laboratories is discussed (air filter analysis; intercomparison; trace elements; control charts).     

Land reclamation and strip-mined coal production in appalachia

This study quantifies the short-run impacts of reclamation on strip mining costs, coal prices, production, and employment in Appalachia. A process analysis model is developed and used to estimate short-run strip-mined coal supply functions under conditions of alternative reclamation requirements. Then, an econometric model is developed and used to estimate coal demand relations. Our results show that full reclamation has rather minor impacts. In 1972, full reclamation would have increased strip-mined coal production costs an average of $0.35 per ton, reduced strip-mined coal production by 10 million tons, and cost approximately 1600 jobs in Appalachia.     

Development of a procedure for sustainable in situ aquifer denitrification

Denitrification experiments have provided data showing the pitfalls and successes in developing a sustainable injection/extraction system in a sand and gravel aquifer. Experiments increase in complexity from continuous injection at one well to automated‐pulsed eight well injections. In both continuous and pulsed injection of organic carbon, 40 mg NO_3‐N l^?1 was reduced below the detection limit of < 0.1 mg NO_3‐N l^?1 in the denitrification zones. Under continuous injection, accumulation of bacterial exudates in the vicinity of the injection well resulted in injection well clogging within ten days. Periodic cleaning of the injection well and the adjacent gravel matrix was accomplished by using a tool developed to circulate a cleaning solution composed of 5 percent H₂O₂ and 0.02 percent NaOCl; but, biofouling could not be eliminated. In the later experiments, acetate became the carbon amendment because ethanol promoted more biomass development. A specialized pulse injection procedure was developed to separate nitrate from acetate‐C and was successful in alleviating the proliferation of bacterial exudates without affecting the performance of the denitrification system. Using pulsed injection, a maximum of 72 percent nitrate reduction was accomplished in the extraction well water, and denitrification was sustained for three months without clogging. © 2003 Wiley Periodicals, Inc.     

Mobility control: How injected surfactants and biostimulants may be forced into low‐permeability units

Recovering dense nonaqueous‐phase liquid (DNAPL) remains one of the most difficult problems facing the remediation industry. Still, the most common method of recovering DNAPL is to physically remove the contaminants using common technologies such as total fluids recovery pumps, vacuum systems, and “pump‐and‐treat.” Increased DNAPL removal can be attained using surfactants to mobilize and/or solubilize the pollutants. However, very little is understood of the methods developed by petroleum engineers beginning in the 1960s to overcome by‐passed, low‐permeability zones in heterogeneous oil reservoirs. By injecting or causing the formation of viscous fluids in the subsurface, petroleum engineers caused increased in‐situ pressures that forced fluid flow into low permeability units as well as the higher permeability thief zones. Polymer flooding involves injecting a viscous aqueous polymer solution into the contaminated aquifer. Foam flooding involves injecting surfactant to decontaminate the high‐permeability zones and then periodic pulses of air to cause a temporary viscous foam to form in the high‐permeable zones after all DNAPL is removed. Later surfactant pulses are directed by the foam into unswept low‐permeable units. These methods have been applied to DNAPL removal using surfactants but they can also be applied to the injection of bio‐amendments into low‐permeability zones still requiring continued remediation. Here we discuss the principles of mobility control as practiced in an alluvial aquifer contaminated with chlorinated solvent and coal tar DNAPLs as well as some field results. © 2003 Wiley Periodicals, Inc.     

In situ remediation of arsenic in contaminated soils

In situ chemical fixation represents a promising and potentially cost‐effective treatment alternative for metal‐contaminated soils. This article presents the findings of the use of iron‐bearing soil amendments to reduce the leachability and bioaccessibility of arsenic in soils impacted by stack fallout from a zinc smelter. The focus of this investigation was to reduce the lead bioaccessibility of the soils through addition with phosphorus‐bearing amendments. However, as phosphorus addition was expected to increase arsenic mobility, the fixation strategy also incorporated use of iron‐bearing amendments to offset or reverse these effects. The findings of this investigation demonstrated that inclusion of iron‐bearing chemicals in the amendment formulation reduced arsenic leachability and bioaccessibility without compromising amendment effectiveness for reducing lead bioaccessibility. These results suggest that in situ chemical fixation has the potential to be an effective strategy for treatment of the impacted soils. © 2003 Wiley Periodicals, Inc.     

Strategies for Rebuilding Closer Links between Local Indigenous Communities and Their Customary Fisheries in Aotearoa/New Zealand

There is a growing recognition that knowledge of indigenous communities, based on accumulated observations and experience over time, is significant for sustainable environmental management in collaboration with modern scientific knowledge. A number of innovative policy initiatives are currently being implemented in New Zealand to enable indigenous Maori tribes and sub-tribes to rehabilitate and manage their local fisheries in accordance with customary values and practices. These policies are an important milestone from an historical perspective as they are meant to recognise and empower the role of Maori as Treaty partners. The fisheries management regime in New Zealand now provides for Maori representation at the local level within a co-management framework that enables local Maori communities to exercise their customary rights. These institutional arrangements have been crafted to facilitate Maori input, based on customary values and practices, to complement modern Western management practices for sustainable harvesting of marine resources. Nevertheless, the degree to which these initiatives constitute an adequate response to Maori Treaty aspirations is debatable. A major constraint in this respect is that the government is compelled to recognise the needs of other, economically and politically more dominant, non-Maori user-groups in allocating and managing access to fishery resources and the marine environment.     

Local Environmental Investments and Sustainable Development: the evaluation of environmental projects in Scotland supported by the European Agriculture Guidance and Guarantee Fund

In the UK for the period 1994-99, a broad range of environmental projects were given financial support through the European Agriculture Guidance and Guarantee Fund under the Objective 1 and Objective 5b programmes. This paper is concerned with the ex-post evaluation of these projects set within a Sustainable Development framework. The aim was to identify project types or characteristics that offered the greatest return on investment. A classification of six broad project types was adopted. The evaluation revealed that there were significant differences between individual projects with respect to the type and scale, and temporal and social distribution of the benefits they delivered. In particular, as well as delivering environmental and economic benefits, many projects made a significant contribution to the development of human and social capital. The paper concludes that it is possible to improve the basis for future project selection in order to maximise the returns on environmental investments in the context of sustainable development.