Using adaptive governance to rethink the way science supports Australian drought policy

In this paper we show how ideas from a longstanding but little recognised literature on adaptive governance can be used to rethink the way science supports Australian drought policy. We compare and contrast alternative ways of using science to support policy in order to critique traditional commentary on Australian drought policy. We find that criticism from narrow disciplinary and institutional perspectives has provided few practical options for policy makers managing these complex and interacting goals. In contrast, ideas from a longstanding but little recognised literature on adaptive governance have potential to create innovative policy options for addressing the multiple interacting goals of Australian drought policy.From an adaptive governance perspective, the deep concern held by Australian society for rural communities affected by drought can be viewed as a common property resource that can be sustainably managed by governments in cooperation with rural communities. Managing drought assistance as a common property resource can be facilitated through nested and polycentric systems of governance similar to those that have already evolved in other arenas of natural resource management in Australia, such as Landcare groups and Catchment Management Authorities. Essential to delivering these options is the creation of flexible, regionally distributed scientific support for drought policy capable of integrating local knowledge and informing the livelihood outcomes of critical importance to governments and rural communities.     

Free radical biology in neurological manifestations: mechanisms to therapeutics interventions

Environmental Science and Pollution Research - Recent advancements and growing attention about free radicals (ROS) and redox signaling enable the scientific fraternity to consider their involvement...     

Higher Cd adsorption on biogenic elemental selenium nanoparticles

Cadmium (Cd) is a carcinogenic metal contaminating the environment and ending up in wastewaters. There is therefore a need for improved methods to remove Cd by adsorption. Biogenic elemental selenium nanoparticles have been shown to adsorb Zn, Cu and Hg, but these nanoparticles have not been tested for Cd removal. Here we studied the time-dependency and adsorption isotherm of Cd onto biogenic elemental selenium nanoparticles using batch adsorption experiments. We measured ζ-potential values to assess the stability of nanoparticles loaded with Cd. Results show that the maximum Cd adsorption capacity amounts to 176.8 mg of Cd adsorbed per g of biogenic elemental selenium nanoparticles. The ζ-potential of Cd-loaded nanoparticles became less negative from ?32.7 to ?11.7 mV when exposing nanoparticles to an initial Cd concentration of 92.7 mg L^?1. This is the first study that demonstrates the high Cd uptake capacity of biogenic elemental selenium nanoparticles, of 176.8 mg g^?1, when compared to that of traditional adsorbents such as carboxyl-functionalized activated carbon, of 13.5 mg g^?1. An additional benefit is the easy solid–liquid separation by gravity settling due to coagulation of Cd-loaded biogenic elemental selenium nanoparticles.     

Drinking water quality and chronic kidney disease of unknown etiology (CKDu): synergic effects of fluoride,cadmium and hardness of water

Environmental Geochemistry and Health - High prevalence of chronic kidney disease of unknown etiology (CKDu) in some regions of the world is suspected mainly due to a toxin-mediated renal failure....     

Measurement of the scarcity of soil in agriculture

The paper defines the concept of land degradation and costs and effects of soil erosion. Through the concept of optimal levels of soil erosion, a conceptual model of the social costs of soil degradation is elaborated. The discussion focuses on the measurement aspects of the economic scarcity of soil in the agriculture sector. Reliable estimates of the true impacts of soil degradation can only be made if data on marginal damage costs and marginal conservation costs are available. The different scarcity indicators are evaluated and competitive land rental prices are considered as appropriate in indicating soil scarcity in agriculture.     

Dynamic floodplain vegetation model development for the Kootenai River, USA

The Kootenai River floodplain in Idaho, USA, is nearly disconnected from its main channel due to levee construction and the operation of Libby Dam since 1972. The decreases in flood frequency and magnitude combined with the river modification have changed the physical processes and the dynamics of floodplain vegetation. This research describes the concept, methodologies and simulated results of the rule-based dynamic floodplain vegetation model "CASiMiR-vegetation" that is used to simulate the effect of hydrological alteration on vegetation dynamics. The vegetation dynamics are simulated based on existing theory but adapted to observed field data on the Kootenai River. The model simulates the changing vegetation patterns on an annual basis from an initial condition based on spatially distributed physical parameters such as shear stress, flood duration and height-over-base flow level. The model was calibrated and the robustness of the model was analyzed. The hydrodynamic (HD) models were used to simulate relevant physical processes representing historic, pre-dam, and post-dam conditions from different representative hydrographs. The general concept of the vegetation model is that a vegetation community will be recycled if the magnitude of a relevant physical parameter is greater than the threshold value for specific vegetation; otherwise, succession will take place toward maturation stage. The overall accuracy and agreement Kappa between simulated and field observed maps were low considering individual vegetation types in both calibration and validation areas. Overall accuracy (42% and 58%) and agreement between maps (0.18 and 0.27) increased notably when individual vegetation types were merged into vegetation phases in both calibration and validation areas, respectively. The area balance approach was used to analyze the proportion of area occupied by different vegetation phases in the simulated and observed map. The result showed the impact of the river modification and hydrological alteration on the floodplain vegetation. The spatially distributed vegetation model developed in this study is a step forward in modeling riparian vegetation succession and can be used for operational loss assessment, and river and floodplain restoration projects.     

Source apportionment of ultrafine and fine particle concentrations in Brisbane, Australia

Purpose

To investigate the significance of sources around measurement sites, assist the development of control strategies for the important sources and mitigate the adverse effects of air pollution due to particle size.

Methods

In this study, sampling was conducted at two sites located in urban/industrial and residential areas situated at roadsides along the Brisbane Urban Corridor. Ultrafine and fine particle measurements obtained at the two sites in June?CJuly 2002 were analysed by positive matrix factorization.

Results

Six sources were present, including local traffic, two traffic sources, biomass burning and two currently unidentified sources. Secondary particles had a significant impact at site 1, while nitrates, peak traffic hours and main roads located close to the source also affected the results for both sites.

Conclusions

This significant traffic corridor exemplifies the type of sources present in heavily trafficked locations and future attempts to control pollution in this type of environment could focus on the sources that were identified.     

Phytoremedial assessment of flora tolerant to heavy metals in the contaminated soils of an abandoned Pb mine in Central Portugal

Significant accumulation of heavy metals in soils and flora exists around the abandoned Barbadalhos Pb mine in Central Portugal. Soil and plant samples [49 species] were collected from two line transects, LT 1 and LT 2, in the mineralized and non-mineralized area, respectively to gain a comprehensive picture of heavy metals in soils and flora to assess its potential for phytoremediation. Phytosociological inventories of the vegetation were made using the Braun-Blanquet cover-abundance scale. Metal concentrations in soil ranged from (in mg kg^?1): 98–9330 [Pb], 110–517 [Zn], 7.1–50 [Co], 69–123 [Cr], 31–193 [Cu], 33 400–98 500 [Fe], 7.7–51 [Ni], 0.95–13 [Ag], 2.8–208 [As], and 71–2220 [Mn] along LT 1; and 24–93 [Pb], 30–162 [Zn], 3.7–34 [Co], 61–196 [Cr], 21–46 [Cu], 24 100–59 400 [Fe], 17–87 [Ni], 0.71–1.9 [Ag], 4.3–12 [As], and 44–1800 [Mn] along LT 2. Plant metal content ranged from (in mg kg^?1): 1.11–548 [Pb], 7.06–1020 [Zn], 0.08–2.09 [Co], 0.09–2.03 [Cr], 2.63–38.5 [Cu], 10.4–4450 [Fe], 0.38–8.9 [Ni], and 0.03–1.9 [Ag] along LT 1; and 0.94–11.58 [Pb], 2.83–96.5 [Zn], 0.12–1.44 [Co], 0.21–1.49 [Cr], 1.61–22.7 [Cu], 4.6–2050 [Fe], 0.51–4.81 [Ni], and 0.02–0.31 [Ag] along LT 2. Plants with highest uptake of metals were: Cistus salvifolius (548 mg Pb kg^?1), Digitalis purpurea (1017 mg Zn kg^?1 and 4450 mg Fe kg^?1). Mentha suavolens and Ruscus ulmifolius were seen to hyperaccumulate Ag (1.9 and 1 mg Ag kg^?1, respectively). More metals and higher concentrations were traced in plants from LT 1, especially for Pb and Zn.     

Improving petroleum contaminated land remediation decision-making through the MCA weighting process

Internationally petroleum contamination is widespread, posing serious environmental risks including surface and groundwater contamination, thus remediation is essential. The implementation of remediation options is becoming more complex with the increasing influence of stakeholders on the outcome of decision-making processes. Acceptance of remediation schemes during implementation can be increased by involving stakeholders and the public in the decision-making stage. In petroleum remediation involving multiple stakeholders, Multicriteria Analysis has been employed due to its ability to incorporate the preferences of each stakeholder through weighting. The research focused on investigating ways to improve the weighting process. The study demonstrated the utility of SWING, and determined which type of participant and how many participants to include in the decision process, through the application of ELECTRE III and Weighted Summation. It was recommended that a mixture of stakeholders, the public and experts be involved. The total number of participants will be limited by the choice of participatory and weighting methods. The careful selection of participants, as well as the choice of participatory and weighting methods, can minimize the subjectivity involved in MCA weighting, thereby lending decisions in petroleum remediation greater legitimacy.