Potential of windrow food and green waste composting in Tunisia

Environmental Science and Pollution Research - Solid waste management and disposal is one of the most significant challenges facing urban communities around the world. There is a wide range of...     

Chromium geochemistry in coastal environment of the Western Harbour,Egypt: water column,suspended matter and sediments

The distribution of Cr between water, total suspended matter (TSM) and sediments in the maine harbour in Egypt (Western Harbour), has been studied in two surveys. Dissolved Cr displayed a negative association with salinity, indicating land sources outlets as a major source of inputs for it. The Harbour presents higher Cr concentrations in dissolved form above the background (0.17 μg/L) concentration for total dissolved Cr. The most important factors controlling the distribution of particulate Cr in the Western Harbour are the depositional from several activities inside the Harbour, as well as different charges from several landbased sources along its southern edge. Chromium was associated in decreasing amount in the: residual >oxidizable-organic >acid reducible >exchangeable fractions of the analyzed sediments. Therefore, the results indicate that Cr in sediments from W.H is not available for exchange and/or release into the marine environment.     

Mercury removal from aqueous solution using petal-like MoS2 nanosheets

• Synthesized few-layered MoS₂ nanosheets via surfactant-assisted hydrothermal method. • Synthesized MoS₂ nanosheets show petal-like morphology. • Adsorbent showed 93% of mercury removal efficiency. • The adsorption of mercury is attributed to negative zeta potential (-21.8 mV). Recently, different nanomaterial-based adsorbents have received greater attention for the removal of environmental pollutants, specifically heavy metals from aqueous media. In this work, we synthesized few-layered MoS₂ nanosheets via a surfactant-assisted hydrothermal method and utilized them as an efficient adsorbent for the removal of mercury from aqueous media. The synthesized MoS₂ nanosheets showed petal-like morphology as confirmed by scanning electron microscope and high-resolution transmission electron microscopic analysis. The average thickness of the nanosheets is found to be about 57 nm. Possessing high stability and negative zeta potential makes this material suitable for efficient adsorption of mercury from aqueous media. The adsorption efficiency of the adsorbent was investigated as a function of pH, contact time and adsorbent dose. The kinetics of adsorption and reusability potential of the adsorbent were also performed. A pseudo-second-order kinetics for mercury adsorption was observed. As prepared MoS₂ nanosheets showed 93% mercury removal efficiency, whereas regenerated adsorbent showed 91% and 79% removal efficiency in the respective 2^nd and 3^rd cycles. The adsorption capacity of the adsorbent was found to be 289 mg/g at room temperature.     

Can machines recognise stress in plants?

In this paper we show that chlorophyll a fluorescence signals analysed with the self-organizing map (SOM) can be used as a routine tool for the monitoring and classification of pea varieties (Pisum sativum) according to their degree of resistance against drought stress. Fluorescence kinetics measurements were obtained from non-stressed plants. The aim of this study is to evaluate the applicability of artificial intelligence techniques in eco-physiological research. Our goal is to provide a fast tool that will contribute to the knowledge needed to develop strategies that would help to decrease the impact of environmental stress in agriculture and forestry.     

Polymer coating of copper oxide nanoparticles increases nanoparticles uptake and toxicity in the green alga Chlamydomonas reinhardtii

Copper oxide nanoparticles (CuO NPs) are frequently used in a polymer-coated form, to be included in paints or fabrics for antimicrobial properties. Their application in antifouling paints may lead to the contamination of aquatic ecosystems. However, the toxicological risk of NPs in the environment is hard to evaluate due to a lack of knowledge on the mechanisms of NP interaction with biological systems. In this study, we investigated the effect of polymer coating on CuO NP toxicity in the green alga Chlamydomonas reinhardtii by comparing bare and polymer-coated CuO NPs prepared from the same CuO nanopowder. Both CuO NP suspensions were toxic to C. reinhardtii after 6 h treatment to concentrations of 0.005-0.04 g L⁻¹. Bare and polymer-coated CuO NPs induced a decrease of Photosystem II activity and the formation of reactive oxygen species. Polymer-coated CuO NP was found to be more toxic than the uncoated CuO NP. The higher toxicity of CS-CuO NP was mainly associated with the increased capacity of polymer-coated CuO NP to penetrate the cell compared to bare CuO NPs. These results indicates that the high toxicity of polymer-coated CuO NPs in algal cells results of intracellular interactions between NPs and the cellular system.     

Optimum Methods of Inactivation of Strongyloides stercoralis Larvae from Reclaimed Wastewater

Strongyloidiasis presents a major health hazard when reusing wastewater. Albendazol with a concentration of 4 mg/l, a contact time of 45 min, pH 1.2 and pH 10.2, killed the larva. The larva was also killed with a 0.03% concentration of iodine and a detention time of 30 min or a 0.04% concentration of iodine and a contact time of 10 min. The required detention time to inactivate larva in water was found to be 17 days. The minimum revealed residual chlorine to kill the larvae was 4 mg/l with 120 min of detention time, and a minimum contact time was found to be 80 min with a residual of 23 mg/l. Many methods are available to inactivate the Strongyloides stercoralis, which could be acids, alkaline chemicals, larvicidal chemicals, super chlorination, or just detention time. The best method must be determined according to the prevailing specific environmental site and the feasibility of the selected method(s).     

Shell disturbances and butyltins burden in commercial bivalves collected from the Bizerta lagoon (northern Tunisia)

Shell disturbances and soft tissues butyltin burden were investigated in commercial bivalves Lithophaga lithophaga, Mytilus galloprovincialis, Solen marginatus and Crassostrea gigas from the Bizerta lagoon. Shell disturbances were found in all bivalves, being scarce in S. marginatus. In the internal valve of L. lithophaga, burrowing annelids and sipunculids living inside galleries were observed, while in the external valve, brown-blackish or white stains were found. In M. galloprovincialis, a yellowish mass located at the shell anterior side was found fixed firmly to the pearly layer by a hard brownish structure covering some annelid elliptic eggs. In the internal shell layer of some specimens collected in April, embryos belonging to tubiculous annelids at various developmental stages were observed. In C. gigas, shell thickening was revealed in some specimens corresponding to white doughy deposits at the internal valve and between shell layers. In S. marginatus, only one specimen showing a cavity at the posterior site was found. Total butyltin concentrations in the studied bivalves varied between 30 and 245?ng/g dry weight with tributyltin (TBT) being the predominant compound. The highest concentration was recorded in L. lithophaga collected from the Bizerta Bay and the lowest concentration in S. marginatus from Maghraoua. This study provided baseline data that could serve for long-term monitoring of TBT pollution in Tunisia, since legislation to reduce the use of TBT-based antifouling paints has not been introduced yet.     

Optimisation of rainwater tank design from large roofs: A case study in Melbourne, Australia

Rainwater tanks for larger roof areas need optimisation of tank size, which is often not carried out before installation of these tanks. This paper presents a case study of rainwater tank evaluation and design for large roof areas, located in Melbourne, Australia, based on observed daily rainfall data representing three different climatic regimes (i.e. dry average, and wet years). With the aim of developing a comprehensive Decision Support Tool for the performance analysis and design of rainwater tanks, a simple spreadsheet based daily water balance model is developed using daily rainfall data, contributing roof area, rainfall loss factor, available storage volume, tank overflow and irrigation water demand. In this case study, two (185 m³ and 110 m³) underground rainwater tanks are considered. Using the developed model, effectiveness of each tank under different climatic scenarios are assessed. The analysis shows that both the tanks are quite effective in wet and average years, however less effective in dry years. A payback period analysis of the tanks is preformed which reveals that the total construction cost of the tanks can be recovered within 15-21 years time depending on tank size, climatic conditions and future water price increase rates. For the tanks, a relationship between water price increase rates and payback periods is developed. The study highlights the need for detailed optimisation and financial analysis for large rainwater tanks to maximise the benefits.     

Investigating the performance of aerobic,semi-aerobic,and anaerobic bioreactor landfills for MSW management in developing countries

Three different laboratory bioreactors, each duplicated, with dimensions 0.5 × 0.5 × 1 m were set up and monitored for 160 days. Municipal Solid Wastes with an organic content of ~80 % and a density of 550 kg/m³ were placed in bioreactors. Fresh leachate collected from waste collection vehicles was used with a recirculation rate of 28 L/day. Aerobic bioreactors were aerated at a rate of 0.15–0.24 L/min/kg of waste. Almost the same level of treatment was observed in terms of chemical oxygen demand reduction of leachate, which was in the range of 91–93 %. However, for anaerobic bioreactor, it took almost twice the time, 160 vs. 76 days, to reach the same level of treatment and stabilization. The behavior of semi-aerobic bioreactor was somewhere between the aerobic and anaerobic ones. Total biogas production for anaerobic bioreactors was 90 L/kg of waste, which contained 57–63 % methane. Methane concentration measured in semi-aerobic bioreactor was below 5 %. The main advantage of aerobic bioreactor was the fast rate of the process, while for semi-aerobic bioreactor, it was the elimination of the need for energy to maintain aerobic conditions, and for anaerobic bioreactor it was the production of biogas and potential energy recovery.     

Prenatal sonographic diagnosis of a third ventricle choroid plexus papilloma

We report a case of fetal hydrocephalus secondary to a third ventricle choroid plexus papilloma detected by ultrasound at 33 weeks' gestation. The prenatal sonographic and colour flow Doppler findings of this rare fetal intracranial tumour are discussed.