Relationship between chlorine consumption and chlorination by-products formation for model compounds

The objective of this research is to investigate the relationship between chlorine decay and the formations of disinfection by-products (DBP), including trichloromethane (TCM) and chloroacetic acid (CAA) in the presence of four model compounds, i.e., resorcinol, phloroglucinol, p-hydroxybenzoic acid, and m-hydroxybenzoic acid. The chlorine degradation in model compounds with OH and/or COOH functional groups were rapid after chlorination. The TCM yields of carboxylic group substituted compounds (3-hydroxybenzoic acid [3-HBA], 4-hydroxybenzoic acid [4-HBA]) were found to be lower than that of the m-dihydroxy substituted compounds. Phloroglucinol, with one more OH substitution group than resorcinol, tends to form significant amounts of CAA after chlorination. However, it was observed that with the COOH substitution of 3-HBA and 4-HBA tend to exhibit more CAA formation potential than resorcinol. The developed parallel second and first-order reaction model for chlorine demand has been successfully utilized for TCM, CAA and DBP formation modeling. A high correlation between CAA and TCM was observed for the model compounds.     

Degradation of carbofuran in water by solar photocatalysis in presence of photosensitizers

The effect of the presence of photosensitizers, methylene blue (MB) and rose Bengal (RB), on the degradation of carbofuran (2,3-dihydro-2,2-dimethylbenzofuran-7-yl methylcarbamate) in water in a solar photocatalytic system was investigated. It was found that as compared to MB, RB generally showed a stronger effect on the decomposition of carbofuran under comparable conditions. Among the conditions studied, adding 2 x 10(-6) M of RB, that corresponding to 2% of the initial concentration of carbofuran solution in the system, rendered the most effective degradation of carbofuran. As a result, a carbofuran removal percentage of 69.9%, a mineralization efficiency of 28.0%, and a microtoxicity reduction of 65.0% could be achieved. The degradation and mineralization of carbofuran was found to follow the pseudo-first order reaction kinetics. The decomposition mechanism of carbofuran was further investigated through identification of the intermediates to elaborate the influence of dye photosensitizer on the solar photocatalysis of carbofuran in water. On the basis of the intermediates identified, including carbofuran phenol, 3-hydroxy carbofuran phenol, and substituted alcohols (3-phenoxy 1-propanol, 2-ethyl 1-hexanol, 2-butoxyl ethanol), it appears that hydrolysis and hydroxylation were the two key mechanisms for decomposing carbofuran during the process of solar photocatalysis with the aid of dye photosensitizer.     

A CRAZY IDEA ON URBAN WATER MANAGEMENT?1

ABSTRACT. High percentage of imperviousness in the city is the source of storm runoff. Roof area contributes significantly to the imperviousness. An attempt to make use of roofs as urban flood control device and water conservation measure is advocated. Two different schemes, one for built-up industrial-commercial area, the other for residential area, are suggested. The former utilizes the roof as detention reservoir for flood control, the latter employs recharge pit to convert runoff into ground water resource. The proposed schemes are not only hydrologically, hydraulically and structurally sound but also economically feasible. It is worth considering in the future planning of urban renewal and urban development.     

Remediation of a nonachloro biphenyl congener with zero-valent iron in subcritical water

Dechlorination of a nonachloro biphenyl congener with zero-valent iron in water under high temperature and pressure was investigated over time. Temperature has the main influence on the speed of dechlorination. Determination of polychlorinated biphenyls (PCBs) according to the grade of chlorination was performed by gas chromatography with mass selective detection in single ion monitoring mode. Dechlorination results in a variety of lower chlorinated biphenyls. The level of chlorination decreases with time. The amount of PCB molecules decreases to one-third within 90 min at 250 degrees C and 100 atm. However, no increase of biphenyl could be detected over time. A first-order kinetic model fitted the data obtained.     

The life table and competing risks

The concept of the life table originated in longevity studies of man, where it was always presented as a subject peculiar to public health, demography, and actuarial science. As a result, its development has not received sufficient attention in the field of statistics. Actually, the problems of mortality studies are similar to those of reliability theory and life testing, and they may be described in terms familiar to the statistically oriented mind. From a statistical point of view, human life is a random experiment and its outcome, survival or death, ss subject to chance. The life table systematically records the outcomes of many such experiments for a large number of individuals over a period of time. Thus, the quantities in the table are random variables subject to established statistical analysis. The purpose of this presentation is to discuss the life table from a statistical viewpoint.     

SELECTED NUTRIENTS AND HEAVY METALS IN SEWAGE SLUDGE FROM NEW JERSEY POTWs1

ABSTRACT: In order to determine appropriate application rates and to ensure low pollutant levels in sewage sludge, knowing the chemical composition of sewage sludge is of great importance in a land application program. The objective of this study is to evaluate the variability of selected chemical characteristics of sewage sludge from New Jersey publicly owned treatment works (POTWs). Measurements of total Kjeldahl nitrogen (TKN), NH₄⁺‐N, P, K⁺, Cd, Cu, Pb, and Zn reported by 98 facilities in the 1996 and 1997 New Jersey Sludge Quality Assurance Regulations (SQAR) reports were statistically analyzed. Sewage sludge from Category 5 POTWs (greater than 10 percent industrial input) showed higher Cd, Cu, and Pb concentrations than Category 3 and Category 4 facilities (less than 10 percent industrial input). Even though only two years of data were analyzed, there was an indication that Cd and Pb concentrations in sewage sludge are decreasing with time. The yearly mean of only a few facilities exceeded the federal pollution concentration limits (40 CFR Part 503, Table 3). Phosphorus and Cd values showed the highest variability within facilities based on the coefficient of variation. Due to the variability of sewage sludge constituents, the use of the yearly rolling mean of nutrient concentrations to determine application rates was considered inadequate. An actual analysis of the sewage sludge to be applied is more appropriate to determine application rates than historical data.     

Integrating total oxidizable precursor assay data to evaluate fate and transport of PFASs

Fate and transport of per‐ and polyfluoroalkyl substances (PFASs) are complex and are not well understood. Among this class of emerging contaminants, perfluoroalkyl acids (PFAAs) comprising perfluoroalkyl carboxylates (PFCAs) and perfluoroalkyl sulfonates (PFSAs) are being studied more frequently than polyfluorinated compounds. PFAAs are persistent in the environment, recalcitrant to biological degradation, and, therefore, widespread. Previous studies have indicated that some PFASs bioaccumulate. The fate and transport of PFAAs can be complicated by the presence of PFAA precursors. The PFAA precursors are defined in this article as those fluorinated chemicals that can be potentially transformed abiotically or biotically into terminal PFCA or PFSA products. Due to potential biotransformation in the environment, PFAA precursors can influence the temporal and lateral distribution of PFAAs in the environment. Presently, only a very small number of PFAA precursors can be quantitatively analyzed by commercial laboratories. For instance, N‐ethyl perfluorooctanesulfonamidoacetic acid and N‐methyl perfluorooctanesulfonamidoacetic acid are the only two precursors included in the most commonly applied PFAS analytical method, U.S. Environmental Protection Agency Method 537. The current commercial laboratory methodologies primarily quantify between 14 and 31 PFASs. As an alternative, a total oxidizable precursor assay (TOPA) was developed to quantify the measurable PFSA and PFCA concentrations after aggressive oxidation converting PFAA precursors abiotically into PFCAs. The difference between PFAA concentrations before and after oxidation can be used to estimate the amount of oxidizable PFAA precursors in the sample. This is one of the first articles that utilized TOPA data to help interpret PFAS fate and transport in the environment.     

Photocatalytic degradation of lignin using Pt/TiO2 as the catalyst

Photocatalytic degradation of lignin was studied with the use of catalysts TiO(2) and Pt/TiO(2). The influence of several experimental parameters, i.e. pH, catalyst dosage and illumination on lignin degradation was investigated. The results showed that application of UV irradiation alone has almost no effect on the reduction of dissolved organic carbon (DOC) and American Dye Manufacture Institute value (ADMI). However, the addition of TiO(2) and Pt/TiO(2) reduced the original DOC (251 mg l(-1)) by more than 40% within 30 min of treatment and the reaction can be simulated with pseudo-first order kinetics. Rapid degradation of lignin was observed in acidic solution using either TiO(2) or Pt/TiO(2) as the catalyst compared to high pH cases. The content of Pt in the Pt/TiO(2) catalyst is 1%. In addition, too much catalyst addition has not increased the DOC and ADMI reduction proportionally. The investigation also indicated that the photocatalytic degradation rates could be enhanced 1-6 times faster after doping TiO(2) with Pt in different pH cases. A modified Nernst type model was adopted to simulate the decoloring process using TiO(2) and Pt/TiO(2) based on the profiles of oxidation reduction potential during the photocatalytic reaction. The developed equation can be used to predict the color removal efficiency of lignin wastewater by the photocatalytic process.     

Determination of ozone in outdoor and indoor environments using nitrite-impregnated passive samplers followed by ion chromatography

An improved ion chromatographic (IC) method has been developed for the separation of nitrate in filter extracts in the presence of high concentrations of nitrite. This analytical method was successfully used for an indirect measurement of ozone (O3) in outdoor and indoor air, following its collection using a nitrite-impregnated passive sampler. The limit of detection and the limit of quantification, using the modified IC method, were 6 microg l(-1) (3sigma) and 20 microg l(-1) (10sigma), respectively. Improved detection limits and low baseline noise were obtained with the use of eluent generator and high-capacity ion exchange column. The optimized method was used for assessing O3 concentration in both indoor and outdoor environments of 28 child care centers (CCCs) located in different parts of Singapore. The O3 concentrations ranged from 0.1 to 11.95 parts per billion (ppb) in indoor and from 3.2 to 21.7 ppb in outdoor environments during the study period. It was found that, among the CCCs investigated in this study, air-conditioned CCCs and those located in close proximity to traffic emissions had significantly lower O3 concentrations indoors.     

Determination of volatile organic profiles and photochemical potentials from chemical manufacture process vents

The main objective of this study was to monitor the volatile organic compounds (VOCs) in the stack gas released from organic chemical industrial plants to determine emission factors. Samples from 52 stacks, with or without air pollution control devices (APCDs), from seven industrial processes were taken and VOCs measured using U.S. Environmental Protection Agency (EPA) Method 18. These 7 processes, including 26 plants, were the manufacturers of acrylonitrile-butadiene-styrene (ABS), polyvinyl chloride (PVC), polystyrene (PS), acrylic resin (ACR), vinyl chloride (VC), para-terephthalic acid (PTA), and synthetic fiber (SYF). The results clearly indicate significant variations of emission factors among the various industrial processes, particularly emission factors for those without APCDs. As expected, those with APCDs yield much less emission factors. Regardless of those with or without APCDs, the order of manufacturing processes with regard to VOC emission factors is SYF > ABS > PS >ACR > PTA > PVC > VC. The emission factors for some processes also differ from those in EPA-42 data file. The VOC profiles further indicate that some VOCs are not listed in the U.S. VOC/Particulate Matter Speciation Data System (SPECIATE). The potential O3 formation is determined from the total amount of VOC emitted for each of seven processes. The resultant O3 yield varied from 0.22 (ACR) to 2.33 g O3 g(-1) VOC (PTA). The significance of this O3 yield is discussed.