Distribution of U-Th nuclides in the riverine and coastal environments of the tropical southwest coast of India

A reconnaissance study has been made on the distribution of 238U, 234U, 232Th and 230Th in soils, water, suspended particulate matter (SPM) and bottom sediments in the Kali river basin around Kaiga, its estuarine region and the adjacent Arabian Sea to obtain the baseline data of U-Th series nuclides in view of the commissioning of nuclear power reactors at Kaiga, near Karwar, on the southwest coast of India. Drainage basin soils developed over greywackes (the dominant litho-unit upstream) are lower in 238U/Al and 232Th/Al ratios by factors of 3-5 in comparison with those developed over tonalitic gneisses (the dominant litho-unit downstream). The dominance of the former type of soils is reflected in the composition of river-bottom sediments derived from the upstream drainage basin during the monsoon. The 232Th in bottom sediments tends to increase towards the estuarine and coastal areas, presumably due to deposition of heavy minerals and onshore transport of coastal sediments into the estuary. The dissolved U in the Kali river is low (0.001-0.02 microg/l) when compared to the major Indian rivers as the Kali river flows through U-poor greywackes. Thus, the input of dissolved U to the Kali estuary is dominated by sea water. Although there is some evidence for the removal of dissolved U at low salinity during estuarine mixing, its behaviour is conservative in the lower estuary (at higher salinities). The removal rate of dissolved U from the Kali river basin is similar to that reported from other tropical river basins. The U flux from all the west-flowing rivers of Peninsular India is estimated at 26.3 x 10(6) g/yr to the Arabian Sea which is about 2% of the flux from the Himalayan rivers to the Bay of Bengal.     

Atrazine induction of cytochrome P450 in Chironomus tentans larvae

Cytochrome P450-dependent aldrin epoxidation was characterized in third instar larvae of the aquatic midge, Chironomus tentans. Optimal in vitro assay conditions for the epoxidase were pH 7.6 and 31 degrees C. Activity was linear up to 40 min of incubation time and 0.5 mg microsomal protein per incubation. The activity was concentrated in the microsomal fraction of whole body homogenates and was NADPH-dependent. The effect of atrazine exposure on aldrin epoxidase was measured to determine if this herbicide induces cytochrome P450-dependent activity. Comparisons of control and atrazine-exposed midges indicated increased epoxidase activity as a result of atrazine exposure, and a 45 kDa protein of increased intensity was observed after SDS-PAGE of microsomal protein. The molecular weight of this protein was similar in size to cytochrome P450 enzymes reported for other insects. Heme staining of SDS-PAGE gels and immunochemical studies using a Drosophila melanogaster anti-P450 polyclonal antiserum, further support the cytochrome P450 nature of this inducible 45 kDa protein.     

Levels of toxaphene congeners in fish from Danish waters

The levels of toxaphene congeners, in addition to PCB congeners and organochlorine pesticides, were determined in various fish samples from different Danish waters. While PCB-153 and p,p'-DDE show different levels depending on the fishing area, with highest levels in fish from the Western Baltic Sea, toxaphene was detected in all the samples investigated at a more constant level. The distribution of the three toxaphene congeners Parlar #26, #50 and #62 depends on the fishing area, with the Western Baltic Sea being different from the other waters by having almost equal levels of toxaphene congeners #26 and #50.     

The influence on partial order ranking from input parameter uncertainty. Definition of a robustness parameter

The method of partial order ranking has been used within the environmental area for a variety of purposes as an attractive way of handling complex information. However, the environmental data are often associated with a significant degree of uncertainty. In this investigation the general nature of the influence from data uncertainty on the partial order ranking is analyzed. A Monte Carlo type analysis is performed in which a series of randomly formed data are used to test the influence of data uncertainty. The partial order ranking is interpreted, where the results are transferred to a one-dimensional ranking scale taking into account that not all elements are ranked with the same certainty. A simple general robustness parameter (E) in form of the expected number of comparisons for each ranking element is defined and correlated to the uncertainty analysis results. A simple equation relates E to the number of elements and the number of parameters, respectively. The magnitude of the ranking uncertainty is shown to increase rapidly when the E value decreases below 4-5 comparisons per element. When the E value exceeds 5 the ranking uncertainty becomes nearly constant and independent on the actual E value.     

Ground discarded tires remove naphthalene, toluene, and mercury from water

Ground discarded tires adsorb naphthalene, toluene, and mercury ions (Hg2+) from aqueous solutions. Their sorption properties and kinetics were determined by batch equilibration techniques at 20 degrees C. The isotherms were linear for naphthalene and toluene and their sorption coefficients were about 1340 and 255 (ml/g), respectively. Sorption of the organic compounds by the ground rubber particles was relatively fast (within 30 min). However, the mercury isotherms were non-linear, and its sorption was slow as compared to the sorption of the organics. The rubber particles had a strong affinity for Hg2+. These results show that ground discarded tires are effective in removing organic compounds and Hg2+ from wastewater and other contaminated environments. In addition it would be a useful, environmentally friendly use of discarded tires (one tire per year per capita is discarded in the United States).     

Impact of long-term pesticide applications on some soil biological parameters

The soil oxidative and anaerobic processes, as well as, the microbial biomass were followed during three years in a cotton farm (Tatuí) where the recommended pesticides have been used for several years, and in an experimental field (S?o Paulo) treated first time with the same pesticides. The oxidative process was monitored by the dehydrogenase (DHA)-activity using triphenyltetrazolium chloride (TTC) as substrate. The anaerobic process was followed by the iron-oxide reduction, and the microbial biomass was estimated by the substrate (glucose)-indiced respiration. Increases in DHA-activity and in the microbial biomass occurred only in the farm soil, with concomitant decreases in iron-reduction. In the experimental field soil, the increases in DHA-activity were followed only by decreases in iron-reduction. Soil characteristics were the determining factor for different biological parameters after pesticide inputs. All the pesticides produced at least one clear but transient effect.     

New advancements for in situ treatment using electrical resistance heating

Electrical resistance heating (ERH) is proving to be an effective technology to rapidly heat the subsurface and, in doing so, removing volatile organic compounds. Practitioners of this technology have observed that other processes (biodegradation, abiotic degradation, hydrolysis, and possibly others) occur to break down the chemicals of concern, and remediation is not solely accomplished through vaporization. Few sites treated using ERH have been monitored during and after treatment to identify and evaluate the processes occurring and assess the contribution of these other biological and chemical processes in the remediation effort so that they may be incorporated in the remediation design. At Fort Lewis, Washington, a landfill has been undergoing ERH treatment in three phases, where chlorinated volatile organic compounds represent the primary chemicals of concern in soil and groundwater. Other chemicals of concern include petroleum products, oils, and lubricants. The Fort Lewis remediation projects provided an opportunity to observe the reactions occurring in the subsurface during ERH and fine‐tune the study with each phase of operation. This study is still under way. However, the data gathered to date, which focuses on biodegradation, provides insights into the processes that have been observed. For the Fort Lewis site, biotic and abiotic degradation processes have been observed throughout the range of operating temperatures. At the lower temperature ranges (up to 70°C), biological processes appear to predominate. Above 70°C, abiotic processes become much more active. The goal of this work is to eventually optimize the use of these intrinsic processes in ERH remediation to reduce energy requirements and costs. © 2007 Wiley Periodicals, Inc.     

Remediation with cyclodextrin: Recovery of the remedial agent by membrane filtration

Cyclodextrin‐enhanced flushing of contaminants from the subsurface is a promising innovative remediation technology. It will become more economically viable at more sites if methods can be developed to recover and reconcentrate the cyclodextrin solution after it has been flushed through an aquifer. The goal of this study was to determine if membrane technology is capable of meeting that need. Five membranes with different material properties were tested for this purpose in the laboratory. The results of these tests indicate that there are large differences both in the efficiency of these membranes to extract hydroxpropyl‐β‐cyclodextrin (HPCD) and their stability when exposed to trichloroethylene (TCE) at concentrations near aqueous solubility. Not only does the molecular weigh cutoff (MWCO) of a membrane determine if HPCD can be retained, but crucial selection criteria are the membrane's resistance and compatibility with TCE. Of the five membrane materials tested, only two (polymer composite membrane and polysulfone) met both these requirements. The polymer composite membrane (MPF‐44) showed reliable and stable HPCD recoveries (>95 percent) even when exposed to high TCE concentrations. The polysulfone membrane showed high HPCD recoveries, 88.5 ± 0.4 percent to 97 percent ±1 percent for ultrafiltration and nanofiltration membranes, respectively. However, membrane swelling and deterioration became a problem at high TCE concentrations (>1,000 mg/L). These problems diminished when the TCE concentration was less than 1 mg/L. Field tests demonstrated that batch mode treatment by ultrafiltration doubled the cyclodextrin concentration from 5 to 10 percent within three hours at a constant operating pressure of 13 psi. Under continuous single‐pass treatment conditions, cyclodextrin concentration also increased, although the rate of increase was much smaller than in batch mode. Overall, these tests showed that cyclodextrin recovery is possible under field conditions. © 2007 Wiley Periodicals, Inc.