Characterizing and locating air pollution sources in a complex industrial district using optical remote sensing technology and multivariate statistical modeling

Emissions of volatile organic compounds (VOCs) are most frequent environmental nuisance complaints in urban areas, especially where industrial districts are nearby. Unfortunately, identifying the responsible emission sources of VOCs is essentially a difficult task. In this study, we proposed a dynamic approach to gradually confine the location of potential VOC emission sources in an industrial complex, by combining multi-path open-path Fourier transform infrared spectrometry (OP-FTIR) measurement and the statistical method of principal component analysis (PCA). Close-cell FTIR was further used to verify the VOC emission source by measuring emitted VOCs from selected exhaust stacks at factories in the confined areas. Multiple open-path monitoring lines were deployed during a 3-month monitoring campaign in a complex industrial district. The emission patterns were identified and locations of emissions were confined by the wind data collected simultaneously. N,N-Dimethyl formamide (DMF), 2-butanone, toluene, and ethyl acetate with mean concentrations of 80.0?±?1.8, 34.5?±?0.8, 103.7?±?2.8, and 26.6?±?0.7 ppbv, respectively, were identified as the major VOC mixture at all times of the day around the receptor site. As the toxic air pollutant, the concentrations of DMF in air samples were found exceeding the ambient standard despite the path-average effect of OP-FTIR upon concentration levels. The PCA data identified three major emission sources, including PU coating, chemical packaging, and lithographic printing industries. Applying instrumental measurement and statistical modeling, this study has established a systematic approach for locating emission sources. Statistical modeling (PCA) plays an important role in reducing dimensionality of a large measured dataset and identifying underlying emission sources. Instrumental measurement, however, helps verify the outcomes of the statistical modeling. The field study has demonstrated the feasibility of using multi-path OP-FTIR measurement. The wind data incorporating with the statistical modeling (PCA) may successfully identify the major emission source in a complex industrial district.     

Behavior of sartans (antihypertensive drugs) in wastewater treatment plants,their occurrence and risk for the aquatic environment

Pharmaceuticals and other anthropogenic trace contaminants reach wastewaters and are often not satisfactorily eliminated in sewage treatment plants. These contaminants and/or their degradation products may reach surface waters, thus influencing aquatic life. In this study, the behavior of five different antihypertonic pharmaceuticals from the sartan group (candesartan, eprosartan, irbesartan, olmesartan and valsartan) is investigated in lab-scale sewage plants. The elimination of the substances with related structures varied broadly from 17 % for olmesartan up to 96 % for valsartan. Monitoring data for these drugs in wastewater effluents of six different sewage treatment plants (STPs) in Bavaria, and at eight rivers, showed median concentrations for, e.g. valsartan of 1.1 and 0.13 μg L^?1, respectively. Predicted environmental concentrations (PEC) were calculated and are mostly consistent with the measured environmental concentrations (MEC). The selected sartans and the mixture of the five sartans showed no ecotoxic effects on aquatic organisms in relevant concentrations. Nevertheless, the occurrence of pharmaceuticals in the environment should be reduced to minimize the risk of their distribution in surface waters, ground waters and bank filtrates used for drinking water.     

Monitoring of PCDD/Fs and dioxin-like PCBs and seasonal variations in mussels from the Mar Grande and the Mar Piccolo of Taranto (Ionian Sea,Southern Italy)

The levels and specific profiles of polychlorinated dibenzo-p-dioxins, dibenzofurans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (DL-PCBs) in Mytilus galloprovincialis from the Mar Grande and the Mar Piccolo of Taranto were determined during the extensive monitoring plan of Local Health Authority to assess PCDD/Fs and DL-PCBs contamination in food and farm products, within 20 km from the industrial areas of Taranto, between March and December 2011. The average Total Toxicity Equivalence (TEQ) values for the sum of PCDD/F and DL-PCBs ranged from 1.61 to 5.63 pg WHO₂₀₀₅-TEQ g^?1 wet weight basis, with the highest in the first inlet of the Mar Piccolo. In particular, DL-PCBs were the dominant chemicals in all samples, followed by PCDFs and PCDDs. Congener patterns in mussels were similar, indicating a homogeneous behavior in studied areas and, probably, the same type of source. The seasonal concentrations trend showed a relevant increase of dioxin and dioxin-like PCBs TEQs during the summer months, exceeding the limits set by the European Community for food and foodstuff. Reducing PCDD/Fs and PCBs is necessary to decrease contamination levels in order to safeguard marine ecosystem and human health in the Taranto area.     

Three Dimensions of Social Media Messaging Success by Environmental NGOs

Studies show that NGOs persist in using social media to impart unidirectional messages rather than taking advantage of the participatory nature of networked media. Fear of a loss of message control may be at the heart of NGOs’ desire to keep social media messages on track. The current study examines the success of an environmental NGO in keeping its social media messages under control using quantitative content analysis of an NGO-promoted hashtag, #climatemarch, during a United Nations conference on climate change in 2015. Three dimensions of social media message success – volume, topic/valence, and participants – are proposed.     

Determination of benzotriazoles in dishwasher tabs from Germany and estimation of the discharge into German waters

A method was developed for the determination of benzotriazoles (BTs) in dishwasher tabs. BTs consist of 1H-benzotriazole and/or tolyltriazole, i.e., a technical mixture of the two isomers 4-methylbenzotriazole and 5-methylbenzotriazole (5-MBT). The method consisted of weighing of an aliquot of the tab, addition of the internal standard 5-MBT, precipitation of the soaps with CaCl₂ and KOH, derivatization of the filtrate with acetic acid anhydride in a two-phase system, and analysis of the organic toluene layer by gas chromatography with mass spectrometry in the selected ion monitoring mode. Eleven of 12 different dishwasher tabs from the German market were tested positive with BTs ranging from 2 to 66 mg/tab. Dishwashing experiments were performed to show that at least 99 % of the BT amount used in the dishwasher did not remain on the dishes but was released into the wastewater treatment system. The annual release of BTs into the water system was estimated to be ~80 tons. Since 70 % or less of the BTs can be degraded in wastewater treatment plants, at least 24 tons are annually released into rivers in Germany.     

Evaluation of the MIDTAL microarray chip for monitoring toxic microalgae in the Orkney Islands, U.K.

Harmful or nuisance algal blooms can cause economic damage to fisheries and tourism. Additionally, toxins produced by harmful algae and ingested via contaminated shellfish can be potentially fatal to humans. The seas around the Orkney Islands, UK currently hold a number of toxic algal species which cause shellfishery closures in most years. Extensive and costly monitoring programs are carried out to detect harmful microalgae before they reach action levels. However, the ability to distinguish between toxic and non-toxic strains of some algae is not possible using these methods. The microarrays for the detection of toxic algae (MIDTAL) microarray contains rRNA probes for toxic algal species/strains which have been adapted and optimized for microarray use. In order to investigate the use of the chip for monitoring in the Orkney Islands, samples were collected between 2009 and 2011 from Brings Deep, Scapa Flow, Orkney Islands, UK; RNA was extracted and hybridized with generation 2 and 3.1 of the chip. The data were then compared to cell counts performed under light microscopy and in the case of Alexandrium tamarense to qPCR data targeting the saxitoxin gene and the LSU-rRNA gene. A good agreement between cell numbers and microarray signal was found for A. tamarense, Pseudo-nitzschia sp., Dinophysis sp. (r?<?0.5, for all) in addition to this there the chip successfully detected a large bloom of Karenia mikimotoi (r?<?0.70) in August and September 2011. Overall, there was good improvement in probe signal between generation 2 and generation 3.1 of the chip with much less variability and more consistent results and better correlation between the probes. The chip performed well for A. tamarense group I signal to cell numbers in calibrations (r?>?0.9). However, in field samples, this correlation was slightly lower suggesting interactions between all species in the sample may affect signal. Overall, the chip showed it could identify the presence of target species in field samples although some work is needed to improve the quantitative nature of the chip before it would be suitable for monitoring in the Orkney Islands.     

Automotive Emissions After Hot and Cold Starts in Summer and Winter

Randomly selected passenger automobiles were driven over a 7.5-mile composite route in Cincinnati, Ohio. Samples of the exhaust gases were collected from each car by means of a proportional sampler and analyzed for gross hydrocarbons, carbon monoxide, carbon dioxide, and oxides of nitrogen. In addition, detailed analysis of the hydrocarbons was made. This included parafins, 1 through 8 carbon, olefins, 2 through 6 carbon, and aromatics, 6 through 10 carbon. This paper compares the differences in these emissions immediately after starting with “cold” engines as opposed to emissions from cars started with engines already warmed up or “hot.” This determination was made under both cold and warm weather conditions. A comparison is also made in air pollutants emitted from cars driven under the summer as opposed to the winter conditions normally encountered in Cincinnati, Ohio.