Remediation of saline–sodic soil with flue gas desulfurization gypsum in a reclaimed tidal flat of southeast China

Salinization and sodicity are obstacles for vegetation reconstruction of coastal tidal flat soils. A study was conducted with flue gas desulfurization(FGD)-gypsum applied at rates of 0, 15, 30, 45 and 60 Mg/ha to remediate tidal flat soils of the Yangtze River estuary.Exchangeable sodium percentage(ESP), exchangeable sodium(ExNa), p H, soluble salt concentration, and composition of soluble salts were measured in 10 cm increments from the surface to 30 cm depth after 6 and 18 months. The results indicated that the effect of FGD-gypsum is greatest in the 0–10 cm mixing soil layer and 60 Mg/ha was the optimal rate that can reduce the ESP to below 6% and decrease soil p H to neutral(7.0). The improvement effect was reached after 6 months, and remained after 18 months. The composition of soluble salts was transformed from sodic salt ions mainly containing Na~+, HCO_3~-+ CO_3~(2-)and Cl-to neutral salt ions mainly containing Ca~(2+)and SO_4~(2-). Non-halophyte plants were survived at 90%. The study demonstrates that the use of FGD-gypsum for remediating tidal flat soils is promising.     

Field comparison of manual and semi-automatic methods for the measurement of total gaseous mercury in ambient air and assessment of equivalence

The manual and semi-automatic methods for the measurement of total gaseous mercury in ambient air have been compared in a field trial for the first time. The comparison results have shown that whilst the expected random scatter is present, there was no significant systematic bias between the two methods, whose operational differences have also been outlined and analysed in this work. Furthermore it has been observed that because variation in instrument sensitivity is largely random in nature there is little effect on the results of the comparison if the period between instrument calibrations is altered. When the manual and semi-automatic methods are compared according to guidelines produced by the European Commission the results presented here, taken together with other supporting evidence, strongly suggest that the two methods are equivalent.     

Review of recent advances in research on the toxicity,detection, occurrence and fate of cyclic volatile methyl siloxanes in the environment

The fate and behavior of cyclic volatile methylsiloxanes (cVMS) octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6) in the environment were reviewed. We evaluated their usage data and patterns, physico-chemical properties, toxicology, partitioning and degradation, methods of detection, and concentrations. The use of cVMS as an intermediate in the formation of silicone polymers, personal care and household products has resulted in their widespread environmental exposure; they have been detected in biogas, air, water, soil, biosolid, sediment, and biota samples. Modeled and experimental results suggest that cVMS may be subject to long-range atmospheric transport, but have low potential to contaminate the Arctic. For D4 and D5, there was no evidence of trophic biomagnification in aquatic food webs, while some aquatic organisms demonstrated a high degree of bioconcentration and bioaccumulation. High concentrations of cVMS observed in indoor air and biosolids resulted from point sources. Concentrations of cVMS in water, sediment, and soil were all below their no-observed-effect-concentrations.     

RCRA corrective action costs: An estimating model for nonfederal facilities

This article presents an analysis of the prospective costs of RCRA corrective action for private, nonfederal facilities. Two data bases developed by Research Triangle Institute and a remedial action cost model developed by CH2M Hill provide the foundation for this work. The methodology has two components, a remedial action knowledge base and a discrete-state Monte Carlo analysis. Under base case assumptions, it is estimated that the total costs of RCRA corrective action will be $240 billion, with a 5 percent chance the costs will be less than $170 billion and a 5 percent chance the costs will be more than $377 billion.     

Pollution prevention in China’s electroplating industry

Pollution prevention holds great promise for China as a strategy for curbing environmental degradation in the face of rapid industrial growth. This potential is demonstrated in the electroplating sector in China, where some firms are pursuing pollution prevention aggressively with results that include increased profits and significant cutbacks in pollution. We conducted research in four Chinese cities to investigate pollution prevention in the electroplating industry. Our study finds that firms with successful pollution prevention programs shared three main characteristics. First, they took a proactive approach towards cutting pollution. Proactive firms in our research employed pollution prevention as an overall environmental management strategy for their companies, and they possessed leaders and managers who demonstrated a strong commitment to pollution reduction goals and activities. Firms with successful pollution prevention programs also employed comprehensive environmental management systems. These systems assigned managers and workers responsibilities for pollution prevention through the use of rules, training, monitoring, and penalties and rewards. Finally, firms that undertook extensive pollution prevention measures employed staff with relatively high levels of technical knowledge and ability. Our results suggest that the aggressive adoption of pollution prevention by Chinese firms can help China address the widespread problems of inefficiency and poor management in Chinese firms, and the rapid spread of industrial pollution in rural areas.     

Kin recognition and cannibalistic behaviours by adult male fathead minnows (<Emphasis Type="Italic">Pimephales promelas</Emphasis>)

Parental care is an energetically demanding activity that ensures genes are efficiently passed from one generation to the next. According to evolutionary theory, the greatest energetic investment should be directed towards offspring that are most closely related to the parent. Male fathead minnows, Pimephales promelas, provide this parental investment to developing embryos but not newly hatched larvae. Therefore, selection should favour recognition of embryonic kin to ensure energetic expenditure is optimally invested. In this study, adult male fathead minnows were tested using behavioural assays, with egg cannibalism as an endpoint, to determine whether adult males could discriminate between related and unrelated embryos. Egg cannibalism was highest when adult male fathead minnows were presented with unrelated eggs and lowest when presented with eggs fertilized by the test subject (related eggs). The degree of cannibalism was also a function of breeding status. Unrelated males in breeding condition showed an intermediate response between the low cannibalism demonstrated by related males and the high cannibalism demonstrated by unrelated males in a nonbreeding condition. These results suggest that although male fathead minnows can discriminate between unrelated and related embryos, at least some component of parental investment is a simple function of breeding status.     

Human maternal and umbilical cord blood concentrations of polybrominated diphenyl ethers

Polybrominated diphenyl ethers (PBDEs), widely used as flame retardants in commercial products, have become ubiquitous environmental contaminants. Although adult human exposure to PBDEs is well documented, developmental exposure is less well characterized. The objectives of this study were to measure maternal and fetal exposure to nine PBDE congeners and to investigate potential associations with birth weight. PBDE congeners were quantified in maternal serum at 24-28 weeks of pregnancy, delivery, and umbilical cord serum (UCS) by gas chromatography-mass spectrometry (GC/MS/MS). Complete blood sample sets were obtained from 97 pregnant women (mean age 33.1 ± 0.5 years). PBDE-28, -47 and -99 were quantified in all samples tested and PBDE-47 was the most abundant congener measured in both maternal (mid-pregnancy and delivery samples geometric mean = 26.9 and 26.9, respectively) and UCS (GM = 56.0 ng g⁻¹ lipid). The UCS concentration for all congeners with the exception of PBDE-153 was higher vs. maternal delivery samples (p < 0.001). Only the UCS concentration of PBDE-17 and -99 were significantly associated (β = −49.860, p = 0.032, and β = −3.645, p = 0.05) with birth weight. However, after adjustment for potential confounders only the association between PBDE-99 and birth weight remained significant (β = −3.951 and p = 0.016). We conclude that: the fetus is exposed to PBDEs from at least the second trimester of pregnancy onward; PBDE congeners are higher in UCS compared to maternal serum samples collected at delivery; and that developmental PBDE exposure is potentially associated with lower birth weight.     

Lidar Applications in Air Pollution Research and Control

The fundamental capabilities and limitations of the lidar (laser radar) in observing particulate concentrations in the atmosphere are discussed. The advantages of the lidar technique stem from its ability to obtain measurements remotely and at a high density in space and time. The quantitative application of the technique is limited by the accuracies with which: (1) the separate effects upon the return signal of back-scatter and attenuation may be identified; and (2) the optical parameters may be related to the characteristics of the aerosol. The main areas of utility for lidar in air pollution research and control are: (1) to observe the structure and height of mixing layers; (2) to measure the transport and diffusion of plumes or clouds of particulates; and (3) to remotely determine smoke-plume opacity. These applications are briefly reviewed and exemplified.     

Effects of Operating Variables on PAH Emissions and Mutagenicity of Emissions from Woodstoves

As part of the Integrated Air Cancer Project, the U.S. Environmental Protection Agency (EPA) has conducted field emission measurement programs in Raleigh, North Carolina, and Boise, Idaho, to identify the potential mutagenic Impact of residential wood burning and motor vehicles on ambient and indoor air. These studies included the collection of emission samples from chimneys serving wood burning appliances. Parallel projects were undertaken in Instrumented woodstove test laboratories to quantify woodstove emissions during operations typical of in-house usage but under more controlled conditions.

Three woodstoves were operated In test laboratories over a range of burnrates, burning eastern oak, southern yellow pine, or western white pine. Two conventional stoves were tested at an altitude of 90 m. One of the conventional stoves and a catalytic stove were tested at an altitude of 825 m.

Decreasing burnrate increased total paniculate emissions from the conventional stoves while the catalytic stove's total particulate emissions were unaffected. There was no correlation of total particulate emissions with altitude whereas total polynuclear aromatic hydrocarbon (PAH) emissions were higher at the lower altitude. Mutagenicity of the catalytic stove emissions was higher than emissions from the conventional stove. Emissions from burning pine were more mutagenic than emissions from oak.     

The contribution of azo dyes to the mutagenic activity of the Cristais River

To verify whether dyes emitted within the discharge of a dye processing plant were contributing to the mutagenicity repeatedly found in the Cristais River, Sao Paulo, Brazil, we chemically characterized the following mutagenic samples: the treated industrial effluent, raw and treated water, and the sludge produced by a Drinking Water Treatment Plant (DWTP) located approximately 6 km from the industrial discharge. Considering that 20% of the dyes used for coloring activities might be lost to wastewaters and knowing that several dyes have mutagenic activity, we decided to analyze the samples for the presence of dyes. Thin layer chromatographic analysis indicated the presence of three prevalent dyes in all samples, except for the drinking water. This combination of dyes corresponded to a commercial product used by the industry, and it tested positive in the Salmonella assay. The structures of the dye components were determined using proton magnetic resonance and mass spectrometric (MS) methods, and the dyes were tested for mutagenicity. The blue component was identified as the C.I. Disperse Blue 373, the violet as C.I. Disperse Violet 93, and the orange as C.I. Disperse Orange 37. The dyes showed mutagenic responses of 6300, 4600, and 280 revertants/microg for YG1041 with S9 respectively. A bioassay-directed fractionation/chemical analysis showed that the C.I. Disperse Blue 373 contributed 55% of the mutagenic activity of the DWTP sludge. We showed that these dyes contributed to the mutagenic activity found in the Cristais River environmental samples analyzed and are indirectly affecting the quality of the related drinking water. Therefore, we believe that this type of discharge should be more thoroughly characterized chemically and toxicologically. Additionally, human and ecological risks associated with the release of dye processing plant effluents should be more fully investigated, especially where the resultant water is taken for human consumption.