Human pheromones: have they been demonstrated?

Efforts to collect evidence of human pheromones have focused on three partly overlapping classes of possible human pheromones: (1) axillary steroids, (2) vaginal aliphatic acids, and (3) stimulators of the vomeronasal organ. Examples of each of these classes have been patented for commercial use, and in some cases aggressively marketed, but there is only incomplete evidence supporting any particular claim that a substance acts as a human pheromone. The large axillary scent glands found in humans appear to be well adapted for the production of pheromones, but may actually be used for non-pheromonal odor communication, such as the sharing of information about the immune system. Putative menstrual synchronization within social groups of women and putative acceleration of the menstrual cycle caused by men's odors may suggest the existence of human pheromone systems, but evidence in both cases is still inconclusive.     

Choosing the most effective hazardous waste landfill cover

Determining the appropriate criteria and designs for hazardous waste landfill covers has spawned much discussion within the environmental remediation arena. Very little reliable comparison of various technologies exists. Researchers at Los Alamos National Laboratory studied the relative hydrologic performance of four landfill cover designs—two capillary barrier designs, one modified EPA RCRA design, and one control cover. Monitoring the fate of natural precipitation for nearly four years showed that the covers with barrier layers more effectively reduced deep percolation than the control cover. Although none entirely eliminated deep percolation, the RCRA cover, incorporating a clay hydraulic barrier, most effectively controlled it. The two capillary barriers reduced deep percolation, but significant amounts were still produced. Over 90 percent of all percolation through the covers, and lateral flow within the covers, occurred during February through May each year, primarily as a result of snowmelt, early spring rains, and low evapotranspiration. The study also showed that gravel mulch surface treatments (70- to 80-percent ground cover) reduced runoff and erosion. Despite additional shrubs planted on one, the two plots receiving the gravel mulch treatments exhibited equally enhanced amounts of evapotranspiration.     

A SCREENING MODEL FOR WATER RESOURCES PLANNING1

ABSTRACT: Techniques of optimization and simulation are merged to select the most efficient arrangement of components for regional water resources development and management. Application is made to the Elkhorn River Basin in Nebraska. The Basin extends over 7,000 square miles and includes 184 proposed reservoirs. Structure sizes, locations and operating policies are selected for optimal plans based on economic efficiency and regional development. Results indicate that substantial savings in time and costs over conventional planning techniques are effected. Agreement between model output and agency design values was noted.     

Alternative poultry litter storage for improved transportation and use as a soil amendment

Transportation of poultry litter out of nutrient limited watersheds such as the Illinois River basin (eastern Oklahoma) is a logical solution for minimizing phosphorus (P) losses from soils to surface waters. Transportation costs are basedon mass of load and distance transported. This study investigated an alternative litter storage technique designed to promote carbon (C) degradation, thereby concentrating nutrients for the purpose of decreasing transportation costs through decreased mass. Poultry litter was stored in 0.90-Mg conical piles under semipermeable tarps and adjusted to 40% moisture content, tested with and without addition of alum (aluminum sulfate). additional study was conducted using 3.6-Mg piles under the same conditions, except tested with and without use of aeration pipes. Samples were analyzed before and after (8 wk) storage. Litter mass degradation (i.e., loss in mass due to organic matter decomposition) was estimated on the basis of changes in litter total P contents. Additional characterization included pH, total nutrients, moisture content, total C, and degree of humification. Litter storage significantly decreased litter mass (16 to 27%), concentrated nutrients such as P and potassium (K) and increased proportion of fulvic and humic acids. The addition of aeration pipes increased mass degradationrelative to piles without aeration pipes. Nitrogen volatilization losses were minimized with alum additions. Increases in P and K concentrations resulted in greater monetary value per unit mass compared with fresh litter. Such increases translate to increased litter shipping distance and cost savings of $17.2 million over 25 yr for litter movement out of eastern Oklahoma.     

Consumer-resource body-size relationships in natural food webs

It has been suggested that differences in body size between consumer and resource species may have important implications for interaction strengths, population dynamics, and eventually food web structure, function, and evolution. Still, the general distribution of consumer-'resource body-size ratios in real ecosystems, and whether they vary systematically among habitats or broad taxonomic groups, is poorly understood. Using a unique global database on consumer and resource body sizes, we show that the mean body-size ratios of aquatic herbivorous and detritivorous consumers are several orders of magnitude larger than those of carnivorous predators. Carnivorous predator-prey body-size ratios vary across different habitats and predator and prey types (invertebrates, ectotherm, and endotherm vertebrates). Predator-prey body-size ratios are on average significantly higher (1) in freshwater habitats than in marine or terrestrial habitats, (2) for vertebrate than for invertebrate predators, and (3) for invertebrate than for ectotherm vertebrate prey. If recent studies that relate body-size ratios to interaction strengths are general, our results suggest that mean consumer-resource interaction strengths may vary systematically across different habitat categories and consumer types.     

Microbial populations identified by fluorescence in situ hybridization in a constructed wetland treating acid coal mine drainage

Microorganisms are an integral part of the biogeochemical processes in wetlands, yet microbial communities in sediments within constructed wetlands receiving acid mine drainage (AMD) are only poorly understood. The purpose of this study was to characterize the microbial diversity and abundance in a wetland receiving AMD using fluorescence in situ hybridization (FISH) analysis. Seasonal samples of oxic surface sediments, comprised of Fe(III) precipitates, were collected from two treatment cells of the constructed wetland system. The pH of the bulk samples ranged between pH 2.1 and 3.9. Viable counts of acidophilic Fe and S oxidizers and heterotrophs were determined with a most probable number (MPN) method. The MPN counts were only a fraction of the corresponding FISH counts. The sediment samples contained microorganisms in the Bacteria (including the subgroups of acidophilic Fe- and S-oxidizing bacteria and Acidiphilium spp.) and Eukarya domains. Archaea were present in the sediment surface samples at < 0.01% of the total microbial community. The most numerous bacterial species in this wetland system was Acidithiobacillus ferrooxidans, comprising up to 37% of the bacterial population. Acidithiobacillus thiooxidans was also abundant. Heterotrophs in the Acidiphilium genus totaled 20% of the bacterial population. Leptospirillum ferrooxidans was below the level of detection in the bacterial community. The results from the FISH technique from this field study are consistent with results from other experiments involving enumeration by most probable number, dot-blot hybridization, and denaturing gradient gel electrophoresis analyses and with the geochemistry of the site.     

Groundwater flow, multicomponent transport and biogeochemistry: development and application of a coupled process model

A research tool for modeling the reactive flow and transport of groundwater contaminants in multiple dimensions is presented. Arbitrarily complex coupled kinetic–equilibrium heterogeneous reaction networks, automatic code generation, transfer-function based solutions, parameter estimation, high-resolution methods for advection, and robust solvers for the mixed kinetic–equilibrium chemistry are some of the features of reactive flow and transport (RAFT) that make it a versatile research tool in the modeling of a wide variety of laboratory and field experiments. The treatment of reactions is quite general so that RAFT can be used to model biological, adsorption/desorption, complexation, and mineral dissolution/precipitation reactions among others. The integrated framework involving automated code generation and parameter estimation allows for the development, characterization, and evaluation of mechanistic process models. The model is described and used to solve a problem in competitive adsorption that illustrates some of these features. The model is also used to study the development of an in situ Fe(II)-zone by encouraging the growth of an iron-reducing bacterium with lactate as the electron donor. Such redox barriers are effective in sequestering groundwater contaminants such as chromate and TCE.     

In situ measurements of volatile aromatic hydrocarbon biodegradation rates in groundwater

Benzene and alkylbenzene biodegradation rates and patterns were measured using an in situ microcosm in a crude-oil contaminated aquifer near Bemidji, Minnesota. Benzene-D6, toluene, ethylbenzene, o-, m- and p-xylenes and four pairs of C₃- and C₄-benzenes were added to an in situ microcosm and studied over a 3-year period. The microcosm allowed for a mass-balance approach and quantification of hydrocarbon biodegradation rates within a well-defined iron-reducing zone of the anoxic plume. Among the BTEX compounds, the apparent order of persistence is ethylbenzene > benzene > m,p-xylenes > o-xylene ≥ toluene. Threshold concentrations were observed for several compounds in the in situ microcosm, below which degradation was not observed, even after hundreds of days. In addition, long lag times were observed before the onset of degradation of benzene or ethylbenzene. The isomer-specific degradation patterns were compared to observations from a multi-year study conducted using data collected from monitoring wells along a flowpath in the contaminant plume. The data were fit with both first-order and Michaelis-Menten models. First-order kinetics provided a good fit for hydrocarbons with starting concentrations below 1 mg/L and Michaelis-Menten kinetics were a better fit when starting concentrations were above 1 mg/L, as was the case for benzene. The biodegradation rate data from this study were also compared to rates from other investigations reported in the literature.     

Determination of cyclic volatile methylsiloxanes in water,sediment, soil,biota, and biosolid using large-volume injection–gas chromatography–mass spectrometry

Several methods were developed to detect the cyclic volatile methylsiloxanes (cVMSs) including octamethylcyclotetrasiloxane (D4), decamethylcyclopentasiloxane (D5), and dodecamethylcyclohexasiloxane (D6) in water, sediment, soil, biota, and biosolid samples. Analytical techniques employed to optimize measurement of this compound class in various matrices included membrane-assisted solvent extraction in water, liquid–solid extraction for sediment, soil, biota, and biosolid samples. A subsequent analysis of the extract was conducted by large-volume injection–gas chromatography−mass spectrometry (LVI−GC−MS). These methods employed no evaporative techniques to avoid potential losses and contamination of the volatile siloxanes. To compensate for the inability to improve detection limits by concentrating final sample extract volumes we used a LVI–GC–MS. Contamination during analysis was minimized by using a septumless GC configuration to avoid cVMS’s associated with septum bleed. These methods performed well achieving good linearity, low limits of detection, good precision, recovery, and a wide dynamic range. In addition, stability of cVMS in water and sediment was assessed under various storage conditions. D4 and D5 in Type-I (Milli-Q) water stored at 4 °C were stable within 29 d; however, significant depletion of D6 (60–70%) occurred only after 3 d. Whereas cVMS in sewage influent and effluent were stable at 4 °C within 21 d. cVMS in sediment sealed in amber glass jars at −20 °C and in pentane extracts in vials at −15 °C were stable during 1 month under both storage conditions.     

The clearinghouse concept: a model for geospatial data centralization and dissemination in a disaster

The disaster clearinghouse concept originates with the earthquake community as an effort to coordinate research and data collection activities. Though prior earthquake clearinghouses are small in comparison to what was needed in response to Hurricane Katrina, these seminal structures are germane to the establishment of our current model. On 3 September 2005, five days after Katrina wrought cataclysmic destruction along the Gulf Coast, FEMA and Louisiana State University personnel met to establish the LSU GIS Clearinghouse Cooperative (LGCC), a resource for centralization and dissemination of geospatial information related to Hurricane Katrina. Since its inception, the LGCC has developed into a working model for organization, dissemination, archiving and research regarding geospatial information in a disaster. This article outlines the formation of the LGCC, issues of data organization, and methods of data dissemination and archiving with an eye towards implementing the clearinghouse model as a standard resource for addressing geospatial data needs in disaster research and management.