PFOS and PFC releases and associated pollution from a PFC production plant in Minnesota (USA)

Perfluorooctane sulfonate (PFOS) and PFOS-related substances have been listed as persistent organic pollutants in the Stockholm Convention. From August 2012, Parties to the Convention needed to address the use, storage, and disposal of PFOS—including production sites and sites where PFOS wastes have been deposited—in their national implementation plans. The paper describes the pollution in Minnesota (USA) caused by the 3M Company at one of the largest per/polyfluorinated chemical (PFC) production facilities. From early 1950s until the end of 2002, when 3M terminated PFOS and perfluorooctanoic acid (PFOA) production, PFOS, PFOA, and other PFC production wastes were disposed around the plant and in local disposal sites. Discharges from the site and releases from deposits caused widespread contamination of ground and surface waters including local drinking water wells. Fish in the river downstream were contaminated with PFOS to levels that led to fish consumption advisories. Human exposures resulted from ingesting contaminated drinking water, requiring installation of water treatment facilities and alternate water supplies. The critical evaluation of the assessments done revealed a range of gaps in particular of human exposure where relevant exposure pathways including the entire exposure via food have not been taken into consideration. Currently, the exposure assessment of vulnerable groups such as children or Hmong minorities is inadequate and needs to be improved/validated by epidemiological studies. The assessment methodology described for this site may serve—with highlighted improvements—as a model for assessment of other PFOS/PFC production sites in the Stockholm Convention implementation.     

Cost-Effective Enforcement Of Environmental Standards

The body of information presented in this paper is directed to those individuals concerned with cost-effective enforcement of environmental standards. Its aim is twofold. One is to determine some of the differing impacts upon firm behavior of legal enforcement, of economic incentive enforcement, and of mixed legal-economic enforcement. A second objective is to initiate identification of enforcement systems which are most likely to minimize resource costs to firms and enforcement agencies of meeting environmental standards. A computerized model is used to simulate enforcement of the new source particu-late matter discharge standard for coal-fired power plants. Under current legal enforcement it is found that most plants will violate the standard, that small plants will control to higher removal levels than large plants and that firms will install relatively costly pollution control technology. Three enforcement alternatives are considered for overcoming these shortcomings: more stringent legal enforcement, economic incentive enforcement using effluent taxes, and a mixed system which uses device certification tests and effluent taxes. It is found that each of the alternatives can lead to the standard being met and tc more-or-less equal sharing in control burden across plant size. But it is only the two systems which use effluent taxes that give incentive for choosing least costly control technology. It is concluded that the two enforcement systems which use effluent taxes probably would encourage adoption of least cost control technology. This is likely to be a desirable outcome since it may lead to minimum resource costs to power plants and pollution control agencies of meeting fty ash standards. The general applicability of this conclusion to other enforcement situations is discussed.     

Temporal Variations of PM2.5, PM10, and Gaseous Precursors during the 1995 Integrated Monitoring Study in Central California

ABSTRACT

The spatial and temporal distributions of particle mass and its chemical constituents are essential for understanding the source-receptor relationships as well as the chemical, physical, and meteorological processes that result in elevated particulate concentrations in California’s San Joaquin Valley (SJV). Fine particulate matter ₍PM_2.5), coarse particulate matter (PM₁₀), and aerosol precursor gases were sampled on a 3-hr time base at two urban (Bakersfield and Fresno) and two non-urban (Kern Wildlife Refuge and Chowchilla) core sites in the SJV during the winter of 1995–1996.

Day-to-day variations of PM_2.5 and PM₁₀ and their chemical constituents were influenced by the synoptic-scale meteorology and were coherent among the four core sites. Under non-rainy conditions, similar diurnal variations of PM_2.5 and coarse aerosol were found at the two urban sites, with concentrations peaking during the nighttime hours. Conversely, PM_2.5 and coarse aerosol peaked during the morning and afternoon hours at the two non-urban sites. Under rainy and foggy conditions, these diurnal patterns were absent or greatly suppressed.

In the urban areas, elevated concentrations of primary pollutants (e.g., organic and elemental carbons) during the late afternoon and nighttime hours reflected the impact from residential wood combustion and motor vehicle exhaust. During the daytime, these concentrations decreased as the mixed layer deepened. Increases of secondary nitrate and sulfate concentrations were found during the daylight hours as a result of photochemical reactions. At the non-urban sites, the same increases in secondary aerosol concentrations occurred during the daylight hours but with a discernable lag time. Concentrations of the primary pollutants also increased at the non-urban sites during the daytime. These observations are attributed to mixing aloft of primary aerosols and secondary precursor gases in urban areas followed by rapid transport aloft to non-urban areas coupled with photochemical conversion.     

PM2.5 source apportionment: reconciling receptor models for U.S. nonurban and urban long-term networks

Chemical mass balance (CMB) and trajectory receptor models were applied to speciated particulate matter with aerodynamic diameter < or =2.5 microm (PM2.5) measurements from Speciation Trends Network (STN; part of the Chemical Speciation Network [CSN]) and Interagency Monitoring of Protected Visual Environments (IMPROVE) monitoring network across the state of Minnesota as part of the Minnesota PM2.5 Source Apportionment Study (MPSAS). CMB equations were solved by the Unmix, positive matrix factorization (PMF), and effective variance (EV) methods, giving collective source contribution and uncertainty estimates. Geological source profiles developed from local dust materials were either incorporated into the EV-CMB model or used to verify factors derived from Unmix and PMF. Common sources include soil dust, calcium (Ca)-rich dust, diesel and gasoline vehicle exhausts, biomass burning, secondary sulfate, and secondary nitrate. Secondary sulfate and nitrate aerosols dominate PM2.5 mass (50-69%). Mobile sources outweigh area sources at urban sites, and vice versa at rural sites due to traffic emissions. Gasoline and diesel contributions can be separated using data from the STN, despite significant uncertainties. Major differences between MPSAS and earlier studies on similar environments appear to be the type and magnitude of stationary sources, but these sources are generally minor (<7%) in this and other studies. Ensemble back-trajectory analysis shows that the lower Midwestern states are the predominant source region for secondary ammoniated sulfate in Minnesota. It also suggests substantial contributions of biomass burning and soil dust from out-of-state on occasions, although a quantitative separation of local and regional contributions was not achieved in the current study. Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for a summary of input data, Unmix and PMF factor profiles, and additional maps.     

A framework of connections between soil and people can help improve sustainability of the food system and soil functions

Globally soil quality and food security continue to decrease indicating that agriculture and the food system need to adapt. Improving connection to the soil by knowledge exchange can help achieve this. We propose a framework of three types of connections that allow the targeting of appropriate messages to different groups of people. Direct connection by, for example, handling soil develops soil awareness for management that can be fostered by farmers joining groups on soil-focused farming such as organic farming or no-till. Indirect connections between soil, food and ecosystem services can inform food choices and environmental awareness in the public and can be promoted by, for example, gardening, education and art. Temporal connection revealed from past usage of soil helps to bring awareness to policy workers of the need for the long-term preservation of soil quality for environmental conservation. The understanding of indirect and temporal connections can be helped by comparing them with the operations of the networks of soil organisms and porosity that sustain soil fertility and soil functions.     

Source apportionment: findings from the U.S. Supersites Program

Receptor models are used to identify and quantify source contributions to particulate matter and volatile organic compounds based on measurements of many chemical components at receptor sites. These components are selected based on their consistent appearance in some source types and their absence in others. UNMIX, positive matrix factorization (PMF), and effective variance are different solutions to the chemical mass balance (CMB) receptor model equations and are implemented on available software. In their more general form, the CMB equations allow spatial, temporal, transport, and particle size profiles to be combined with chemical source profiles for improved source resolution. Although UNMIX and PMF do not use source profiles explicitly as input data, they still require measured profiles to justify their derived source factors. The U.S. Supersites Program provided advanced datasets to apply these CMB solutions in different urban areas. Still lacking are better characterization of source emissions, new methods to estimate profile changes between source and receptor, and systematic sensitivity tests of deviations from receptor model assumptions.     

An observational case study of ozone and precursors inflow to South East England during an anticyclone

Summertime photochemical air pollution episodes within the United Kingdom have been proposed via modelling studies to be strongly influenced by regional scale inflow of air from the continental European boundary layer. We present a vertically resolved case study using measurements made from the NERC/Met Office BAe 146 research aircraft on 18th August 2005 over the South East of England and the North Sea during a weak anticyclone centred over Northern Europe. The vertical distribution of ozone, CO, NO(x), peroxyacetyl nitrate (PAN) and a wide range of both nonmethane hydrocarbons (NMHC) and oxygenated volatile organic compounds (OVOCs) were determined between 500 ft (approximately 152 m) and 7000 ft (approximately 2134 m) over the East Anglia coastline and 50 km inland. In excess of 80 ppbV ozone was observed within inflowing boundary layer air over the North Sea coast in a broad N-S sloping feature around 60 km wide. The inflowing feature of European origin was also observed further inland within the boundary layer albeit with lower, more variable, ozone mixing ratios. The increased variability in ozone over land was a product of titration by fresh surface emissions of NO via rapid upward transport in thermals, a hypothesis supported by the observed vertical wind speed component. Fast boundary layer mixing over land was further illustrated by a uniform distribution in reactive alkenes. A comparison between aircraft and surface O(3) UK AUN (Automatic Urban Network) measurements showed good agreement with the inland site, Sibton, but marked differences with the coastal monitoring site at Weybourne, potentially due to gradients established by ocean deposition in stably stratified marine air.     

Analysis of temporal and spatial dichotomous PM air samples in the El Paso-Cd. Juarez air quality basin.

This paper presents and discusses the results obtained from the gravimetric and chemical analyses of the 24-hr average dichotomous samples collected from five sites in the El Paso-Cd. Juarez air quality basin between August 1999 and March 2000. Gravimetric analysis was performed to determine the temporal and spatial variations of PM2.5 (particulate matter less than 2.5 microm in diameter) and PM25-10 (particulate matter less than 10 pm but greater than 2.5 microm in diameter) mass concentrations. The results indicate that approximately 25% of the PM10 (i.e., PM25 + PM25-10) concentration is composed of PM2.5. Concurrent measurements of hourly PM concentrations and wind speed showed strong diurnal patterns of the regional PM pollution. Results of X-ray fluorescence (XRF) elemental analyses were compared to similar but limited studies performed by the Texas Natural Resource Conservation Commission (TNRCC) in 1990 and 1997. Major elements from geologic sources-Al, Si, Ca, Na, K, Fe, and Ti-accounted for 35% of the total mass concentrations in the PM2.5-10 fraction, indicating that geologic sources in the area are the dominant PM sources. Levels of toxic trace elements, mainly considered as products of anthropogenic activities, have decreased significantly from those observed in 1990 and 1997.