2013年春夏季莱州湾海水环境要素特征和富营养化评估

根据2013年5（春季）、8月（夏季）莱州湾海水环境要素的调查资料,采用富营养化指数、潜在性富营养化评价模式和灰色聚类分析方法研究环境要素特征和评估海水富营养化状况。结果表明,无机氮是莱州湾水质的主要污染要素,春夏季的N/P平均值分别为100.76、117.84,潜在性富营养化评价模式结果表明,春夏季各站位的营养级均只包括Ⅳ_P、Ⅵ_P两类,磷限制为莱州湾的营养盐结构特征;富营养化指数评价结果表明,春季和夏季E>1站位比例分别为65%、20%;灰色聚类分析结果表明,春季Ⅱ级、Ⅲ级的站位比例分别为95%、5%,夏季Ⅱ、Ⅲ级的站位比例分别为70%、25%,Ⅱ级中的部分站位具有较大潜在富营养化风险。     

大连市臭氧污染特征及典型污染日成因

通过对大连市区10个空气监测子站的监测数据进行分析,探讨了大连市臭氧污染的时空分布、气象条件对臭氧污染的影响,对臭氧污染日进行了归类分析。结果表明,大连市臭氧污染主要出现在4—10月。在强紫外辐射、高温、低湿、低压和低风速的气象条件下,监测点位的臭氧浓度较高。臭氧污染日的日变化分为单峰型、双峰型和夜间持续升高型3种类型。通过对2015年的一次高浓度臭氧污染过程的气象条件、污染物浓度和污染气团轨迹进行分析,发现臭氧浓度在夜间持续升高现象与区域输送密切相关。     

高效率颗粒物微物理模型简介与重污染过程应用分析

中国细颗粒物(PM2.5)导致的空气污染和雾霾天气问题越来越突出,在低层对流层中很多地方都有显著的二次颗粒物生成过程,因此对颗粒物物理化学转化过程的研究具有重要意义,其转化过程对空气质量模式模拟和预报的准确性有重要影响。高效率颗粒物微物理(APM)模型经过近20多年的研究和发展,在全球化学传输模型(GEOS-Chem)、区域性气象和化学预报模型(WRF-Chem)通用地球系统模型(CESM-CAM5)等气象及环境空气质量预报模型中取得了很好的应用验证,能够在全球/区域等不同尺度对粒子生成、长大、凝聚、消除等微物理过程以及气溶胶光学厚度(AOD)、直接/间接辐射强迫等进行模拟。应用GEOS-Chem-APM模式模拟了2014年2月京津冀区域的重污染过程。结果显示,湿度模拟的准确性对其他物理和污染物浓度等模拟结果有重要作用;2月20—26日的重污染过程模拟结果与实际观测较为吻合,主要污染特点是较高的湿度(90%以上),同时,二次颗粒物和包裹了二次物种的一次颗粒物(黑碳/有机碳)是低能见度的最大贡献者。     

浅谈滨海湿地生态环境退化监测与评价

指出了滨海湿地面临的主要环境问题。简述了美国、欧洲、澳大利亚等滨海湿地现状及监测评价方法。对我国滨海湿地管理与研究进展进行了分析探索。     

美国地表水环境监测管理体系及对我国的启示

简述了美国地表水监测管理体系,指出其健全的环境监测体系、完善的标准体系以及充分的信息公开和数据共享是保障水环境质量的基石、关键和枢纽。结合我国水环境监测管理的现状,提出,应加强水环境质量监测的立法工作,进一步完善水污染物排污许可证制度,建立以水环境质量为目标的水环境管理制度体系,进一步加大监测信息公开和数据共享力度,修订更适合我国的水环境质量监测指标。     

Diversity of crude oil-degrading bacteria and alkane hydroxylase (<Emphasis Type="Italic">alkB</Emphasis>) genes from the Qinghai-Tibet Plateau

The aim of this study was to survey the response of the microbial community to crude oil and the diversity of alkane hydroxylase (alkB) genes in soil samples from the Qinghai-Tibet Plateau (QTP). The enrichment cultures and clone libraries were used. Finally, 53 isolates and 94 alkB sequences were obtained from 10 pristine soil samples after enrichment at 10 °C with crude oil as sole carbon source. The isolates fell into the phyla Proteobacteria, Actinobacteria, and Bacteroidetes, with the dominance of Pseudomonas and Acinetobacter. The composition of degraders was different from polar habitats where Acinetobacter sp. is not a predominant responder of alkane degradative microbial communities. Phylogenetic analysis showed that the alkB genes from isolates and enrichment communities formed eight clusters and mainly related with alkB genes of Pseudomonas, Rhodococcus, and Acinetobacter. The alkB gene diversity in the QTP was lower than marine environments and polar soil samples. In particular, a total of 10 isolates exhibiting vigorous growth with crude oil could detect no crude oil degradation-related gene sequences, such as alkB, P450, almA, ndoB, and xylE genes. The Shannon-Wiener index of the alkB clone libraries from the QTP ranged from 1.00 to 2.24 which is similar with polar pristine soil samples but lower than that of contaminated soils. These results indicated that the Pseudomonas, Acinetobacter, and Rhodococcus genera are the candidate for in situ bioremediation, and the environment of QTP may be still relatively uncontaminated by crude oil.     

Spatial succession modeling of biological communities: a multi-model approach

Strong spatial correlation may exist in the spatial succession of biological communities, and the spatial succession can be mathematically described. It was confirmed by our study on spatial succession of both plant and arthropod communities along a linear transect of natural grassland. Both auto-correlation and cross-correlation analyses revealed that the succession of plant and arthropod communities exhibited a significant spatial correlation, and the spatial correlation for plant community succession was stronger than arthropod community succession. Theoretically it should be reasonable to infer a site's community composition from the last site in the linear transect. An artificial neural network for state space modeling (ANNSSM) was developed in present study. An algorithm (i.e., Importance Detection Method (IDM)) for determining the relative importance of input variables was proposed. The relative importance for plant families Gramineae, Compositae and Leguminosae, and arthropod orders Homoptera, Diptera and Orthoptera, were detected and analyzed using IDM. ANNSSM performed better than multivariate linear regression and ordinary differential equation, while ordinary differential equation exhibited the worst performance in the simulation and prediction of spatial succession of biological communities. A state transition probability model (STPM) was proposed to simulate the state transition process of biological communities. STPM performed better than multinomial logistic regression in the state transition modeling. We suggested a novel multi-model framework, i.e., the joint use of ANNSSM and STPM, to predict the spatial succession of biological communities. In this framework, ANNSSM and STPM can be separately used to simulate the continuous and discrete dynamics.     

Spatial variability of soil heavy metals in the three gorges area: multivariate and geostatistical analyses

There is a growing concern about environmental contamination in the three gorges area. The objectives of this study were to investigate the spatial variability and the possible influence factors of seven heavy metals (As, Cd, Cr, Cu, Hg, Pb, and Zn) in the center of this area based on multivariate and geostatistical approaches. All analyzed heavy metals were below their background levels, except Cd. The average concentrations of the analyzed elements in topsoil (0-20 cm) were 5.83 mg As kg(-1), 0.21 mg Cd kg(-1), 78.79 mg Cr kg(-1), 21.53 mg Cu kg (-1), 0.049 mg Hg kg(-1), 24.12 mg Pb kg(-1), and 68.5 mg Zn kg(-1). The concentration of As was mostly due to parent materials, whereas the source of Pb was mainly due to vehicle exhaust. The high concentration of Cd was resulted from agricultural practices and parent materials. The concentrations of Cr, Cu, Hg, and Zn were associated with parent materials and human activities.     

Identification of sources of elevated concentrations of polycyclic aromatic hydrocarbons in an industrial area in Tianjin, China

The concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) were determined by gas chromatography equipped with a mass spectrometry detector in 105 topsoil samples from an industrial area around Bohai Bay, Tianjin in the North of China. Results demonstrated that concentrations of PAHs in 104 soil samples from this area ranged from 68.7 to 5,590 ng g^???1 dry weight with a mean of ∑16PAHs 814 ± 813 ng g^???1, which suggests that there exists mid to high levels of PAH contamination. The concentration of ∑16PAHs in one soil sample from Tianjin Port was exceptionally high (48,700 ng g^???1). Ninety-three of the 105 soil samples were considered to be contaminated with PAHs (>200 ng g^???1), and 25 were heavily polluted (>1,000 ng g^???1). The sites with high PAHs concentration are mainly distributed around chemical industry parks and near highways. Two low molecular weight PAHs, naphthalene and phenanthrene, were the dominant components in the soil samples, which accounted for 22.1% and 10.7% of the ∑16PAHs concentration, respectively. According to the observed molecular indices, house heating in winter, straw stalk combustion in open areas after harvest, and petroleum input were common sources of PAHs in this area, while factory discharge and vehicle exhaust were the major sources around chemical industrial parks and near highways. Biological processes were probably another main source of low molecular weight PAHs.