Resourceful ecological treatment of wastewater in urban ecosystem

ＲｅｓｏｕｒｃｅｆｕｌｅｃｏｌｏｇｉｃａｌｔｒｅａｔｍｅｎｔｏｆｗａｓｔｅｗａｔｅｒｉｎｕｒｂａｎｅｃｏｓｙｓｔｅｍＳｏｎｇＹｕｆａｎｇ；ＳｕｎＴｉｅｈｅｎｇ；ＧｏｎｇＰｉｎｇ；ＣｈａｎｇＺｈｉｊｕｎ（ＩｎｓｔｉｔｕｔｅｏｆＡｐｐｌｉｅｄＥｃｏｌｏｇ...     

汞对蔬菜幼苗生长及氧化酶同工酶的影响

汞是城市污水中的一种主要有毒物,郊区农民常用这种污水灌溉农作物,造成减产。含汞工业污水对水稻、小麦种子萌发、幼苗及胚根生长的毒性影响及体内某些酶的变化已有一些报道,但对蔬菜幼苗期形态变化与体内某些酶变化的关系则很少有人探讨。我们用不同浓度汞溶液处理番茄等6种作物种子,探讨其对幼苗生长的影响及体内氧化酶同工酶变化的关系,为生产上早期检测作物受汞害的程度、选择抗汞害的作物品种提供依据。     

大学校园的生态足迹探究

生态足迹分析法是评价绿色校园建设水平较好的指标之一,能定量揭示学校的生态状况,本文结合黑龙江科技学院的校园状况,简要介绍生态足迹成分法的原理和计算分析方法.研究结果表明,黑龙江科技学院2005年总生态足迹为18410.53 hm2,即需要18410.53 hm2生态生产性土地来支持学校的各类消费以及吸纳废弃物;人均生态足迹为0.94 hm2/人,与全国人均生态足迹1.5 hm2相比较,学校的生态状况比较乐观.     

Current status of applying microwave-associated catalysis for the degradation of organics in aqueous phase – A review

1. Download high-res image (67KB)
2. Download full-size image

     

阿司匹林生产用废弃活性炭的微波一步再生

阿司匹林生产过程中会产生大量的粉末状废弃活性炭,对环境造成了较大的影响。提出了不外加活化气体的微波加热一步再生法再生废弃活性炭,使之循环利用。通过试验考察了再生温度、再生时间和物料厚度等因素对再生活性炭吸附性能和得率的影响。在再生温度700℃、再生时间10 min和物料厚度20 mm的优化条件下,亚甲基蓝吸附量为180 mg/g,再生活性炭的得率为40.875%,与常规方法再生药用活性炭相比,降低了再生温度,再生时间缩短了50%左右。此时再生活性炭的比表面积为1 296 m~2/g,平均孔径为3.016nm,适合于吸附亚甲基蓝,总孔体积为0.977 4 m L/g,其中微孔占47.81%,表明微孔和中孔都较为发达。扫描电镜和傅里叶变换红外光谱图分析表明,活性炭孔隙和表面性质得到了有效的再生恢复。微波一步再生法避免了通入活化气体而导致大量粉末活性炭被带走的问题,并且该方法具有速度快、效率高等优势。     

Probabilistic risk assessment for pedestrian–vehicle collision considering uncertainties of pedestrian mobility

Objectives: The uncertainties of pedestrian mobility are important factors affecting the accuracy and robustness of an active pedestrian protection system. This study is to provide the means for probabilistic risk evaluation of pedestrian–vehicle collision by counting the uncertainties in pedestrian motion.

Method: The pedestrian is modeled by a first-order Markov model to characterize the stochastic properties in mobility according to field experiments of pedestrians crossing an uncontrolled road. Based on the assumption of Gaussian distribution, unscented transformation (UT) is employed to predict the collision risk probability with the symmetric σ-set constructed on the basis of discrete trajectory simulation. Simulation experiments were carried out with 10,000 Monte Carlo (MC) simulations as the reference.

Results: The probability density distributions of time-to-collision, minimal distance, and collision probability estimated by UT coincide with the reference ones under various vehicle–pedestrian conflict scenarios, and the maximal deviation of collision probability from the reference is 5.33%. The UT method is about 600 times faster than the MC method (10,000 runs), which means that the proposed method has the potential for online application.

Conclusions: This article presents an effective and efficient algorithm to estimate the collision probability by using a UT method to solve the nonlinear transformation of uncertainties in pedestrian motion. Simulation results show that the UT-based method achieves accurate collision probability estimation and higher computation efficiency than MC and provides more valuable information concerning collision avoidance than the deterministic methods in the design of a pedestrian collision avoidance system.     

合成树脂行业挥发性有机物排放成分谱及影响

使用SUMMA罐采集华东地区5类典型合成树脂企业有组织排口样品,通过气相色质联用技术（GC-MS）定量分析106种VOCs,计算了合成树脂行业排放量、排放系数和不确定性,分析了VOCs的排放特征和臭氧生成潜势,建立了5类合成树脂VOCs排放成分谱.结果表明：合成树脂企业VOCs排放量为346~3467kg/a,5类合成树脂排放系数为0.06~1.24g/kg,其中涂料树脂（CR）类企业排放量和排放系数均最大.芳香烃、含氧烃（OVOCs）和卤代烃是合成树脂行业VOCs排放基本组分,累计占比范围是73.2%~98.3%.涂料树脂、酚醛树脂（PF）、聚氨酯（PU）、共聚物树脂（ABS）和聚碳酸酯（PC）特征污染物分别为：甲基异丁基酮、苯、甲苯、苯乙烯和二氯甲烷.合成树脂企业臭氧生成潜势（OFP）为22.7~202.5mg/m³,源反应性（SR）为0.3~4.6g/g,CR类企业OFP和SR均最大.合成树脂行业SR处于各行业平均水平.芳香烃、OVOCs和烯炔烃是合成树脂行业的主要光化学活性组分,累计OFP贡献率为64.1%~100.0%,苯、甲苯、甲基异丁基酮、乙烯、苯乙烯是合成树脂行业关键活性物种.研究显示,合成树脂行业VOCs治理应管控芳香烃和OVOCs的排放,重视污染物恶臭问题和卤代烃溶剂的危害,减排VOCs排放量大、臭氧生成能力强的CR类企业.     

Carbon reduction potential and cost evaluation of different mitigation approaches in China's coal to olefin Industry

Coal-based olefin (CTO) industry as a complement of traditional petrochemical industry plays vital role in China's national economic development. However, high CO₂ emission in CTO industry is one of the fatal problems to hinder its development. In this work, the carbon emission and mitigation potentials by different reduction pathways are evaluated. The economic cost is analyzed and compared as well. According to the industry development plan, the carbon emissions from China's CTO industry will attain 189.43 million ton CO₂ (MtCO₂) and 314.11 MtCO₂ in 2020 and 2030, respectively. With the advanced technology level, the maximal carbon mitigation potential could be attained to 15.3% and 21.9% in 2020 and 2030. If the other optional mitigation ways are combined together, the carbon emission could further reduce to some extent. In general, the order of mitigation potential is followed as: feedstock alteration by natural gas > CO₂ hydrogenation with renewable electricity applied > CCS technology. The mitigation cost analysis indicates that on the basis of 2015 situation, the economic penalty for feedstock alteration is the lowest, ranged between 186 and 451 CNY/tCO₂, and the cost from CCS technology is ranged between 404 and 562 CNY/tCO₂, which is acceptable if the CO₂ enhanced oil recovery and carbon tax are considered. However, for the CO₂ hydrogenation technology, the cost is extremely high and there is almost no application possibility at present.     

Surface characterization of metal oxides-supported activated carbon fiber catalysts for simultaneous catalytic hydrolysis of carbonyl sulfide and carbon disulfide

The sol–gel method was used to synthesize a series of metal oxides-supported activated carbon fiber (ACF) and the simultaneous catalytic hydrolysis activity of carbonyl sulfide (COS) and carbon disulfide (CS₂) at relatively low temperatures of 60°C was tested. The effects of preparation conditions on the catalyst properties were investigated, including the kinds and amount of metal oxides and calcination temperatures. The activity tests indicated that catalysts with 5 wt.% Ni after calcining at 400°C (Ni(5)/ACF(400)) had the best performance for the simultaneous catalytic hydrolysis of COS and CS₂. The surface and structure properties of prepared ACF were characterized by scanning electron microscope-energy disperse spectroscopy (SEM-EDS), Brunauer–Emmett–Teller (BET), X-ray diffraction (XRD), carbon dioxide-temperature programmed desorption (CO₂-TPD) and diffuse reflectance Fourier transform infrared reflection (DRFTIR). And the metal cation defects were researched by electron paramagnetic resonance (EPR) method. The characterization results showed that the supporting of Ni on the ACF made the ACF catalyst show alkaline and increased the specific surface area and the number of micropores, then improved catalytic hydrolysis activity. The DRFTIR results revealed that -OH species could facilitate the hydrolysis of COS and CS₂; -COO and -C–O species could facilitate the oxidation of catalytic hydrolysate H₂S. And the EPR results showed that high calcination temperature conditions provide more active reaction center for the COS and CS₂ adsorption.     

铊污染地下水的微生物修复研究

铊(Tl)是一种高毒性的重金属,具有生物蓄积性,自然界中常以Tl(I)形式存在。铊通过各种途径进入水体、土壤和沉积物等,会对环境造成严重的危害。本研究利用好氧微生物处理技术对铊污染地下水进行了修复研究。以乙酸钠为碳源,初始Tl(I)浓度为100μg/L,周期为6 d时,总铊去除率达到了63.50%。总铊去除率随着pH的升高先升高后降低,随着初始Tl(I)浓度的升高而降低。16S rRNA基因测序分析表明了铊抗性或铊氧化细菌的存在,如Stenotrophomonas、Acidovorax、Rhodococcus等,这些细菌的共同作用实现了铊的氧化与原位沉淀。本研究为铊污染地下水的微生物修复提供了理论基础,也为微生物技术修复其他重金属污染地下水提供了新的思路。