基于OP-FTIR的化工区空气特征污染实测方法研究

应用开放式傅里叶变换红外光谱分析仪(OP-FTIR)对华东地区某化工区周边空气特征污染进行了180 d连续在线监测,建立了污染特征分析、预警评估和污染溯源等体系化监测应用方法,匹配形成了近10项日常数据监控指标的质保质控体系和基于最小二乘法人机结合的谱图解析和数据生成体系,数据误差控制在20%以内。结果表明,通过180 d外场稳定监测,实现了超过40种区域特征污染因子库的建立和实时监控,掌握了乙烯和甲醇等10余种特征污染物的排放规律和主要来源。     

2015年冬季苏州城市热岛特征研究

基于Landsat土地利用类型分类资料、夜间灯光影像资料、自动气象站资料以及大气边界层探测资料,划分出城市、郊区以及湖区代表站,分析了苏州2015年1月城市热岛日变化、昼夜差异特征以及城、湖温度差日变化特征,并对苏州城市热岛分布特征以及城、湖大气边界层结构差异进行分析。结果显示：(1)白天热岛强度小,09~17时热岛强度均小于1℃,最小值仅为02℃;夜间热岛强度大,19~05时热岛强度维持在12℃以上,最大值为17℃。(2)城、湖温差白天为正,夜间为负,市区变温速率比湖区快约02℃/h。(3) 苏州白天热中心形状不规则,范围大,城郊温差小,夜间形成单一封闭稳定热中心,热中心形状与市区有较好对应,城、郊温差维持在15℃左右。冬季地面盛行西北风,太湖湖陆风现象显著,湖陆风和盛行风向共同影响城市热羽向西南方向发展。（4）城、湖虚位温廓线在白天差异小,均有不稳定边界层形成,夜间市区仍维持不稳定边界层,而湖区有稳定边界层发展,近地层内干岛效应显著。(5)城市热岛影响范围有明显日变化特征,白天城市热岛影响范围小于40 m,夜间大于200 m。     

工业区恶臭污染自动监控体系设计

选取典型工业区,汇总了恶臭污染的突发性、排放不规律、夜间高值显著等特征,分析了由化学特性、物质种类和监控要求等带来的恶臭污染监测难点。根据信访投诉、地理特点和大气扩散规律,提出构建工业区恶臭污染自动监控体系。在恶臭污染排放特征分析基础上,筛选优控污染物,优选适用在线监测技术,建设边界监控为主、园区监测为辅的专业化、自动化大气特征污染监测系统,通过统一联网和平台,统一质控和规范,建立预警监测信息平台。在实际构建与应用的过程中,探索了分级管理、多方合作的运行机制,为工业区恶臭污染分析评估、污染溯源和控制提供了技术支持。     

土壤环境质量标准在工程应用中的局限性分析

为贯彻落实《中华人民共和国环境保护法》,加强建设用地土壤环境监管,管控污染地块对人体健康的风险,保障人居环境安全,生态环保部组织相关部门编制了土壤环境质量标准,并于2018年8月1日起开始实施。在标准实施的过程和应用过程中发现新发布的标准存在一些局限性。本文以土壤污染机理为基础,结合现行的治理技术,论述土壤质量标准在时间、空间及应用中的局限性。     

提高自动监控运维管理质量的若干思考

针对排污企业在线自动监控系统管理存在主体责任履行不到位,第三方运维企业人员流动性大且技术素质参差不齐等问题,对照污染源自动监控系统相关法律法规和标准,结合多年的污染源自动监控系统监督核查管理经验,提出排污企业应尽量安装同一品牌同一型号的自动监控设施、建立针对第三方的监督考核机制,运维企业应制定长期有效的管理机制、建立自动监控设施运行动态管理台账等建议,以提升企业自动监控系统管理水平,确保自动监控数据真实、合法、有效,为企业生态环境管理决策提供有力支持。     

Persistent free radicals in humin under redox conditions and their impact in transforming polycyclic aromatic hydrocarbons

• Regulation of redox conditions promotes the generation of free radicals on HM. • HM-PFRs can be fractionated into active and inactive types depending on stability. • The newly produced PFRs readily release electrons to oxygen and generate ROS. • PFR-induced ROS mediate the transformation of organic contaminants adsorbed on HM. The role of humic substance-associated persistent free radicals (PFRs) in the fate of organic contaminants under various redox conditions remains unknown. This study examined the characterization of original metal-free peat humin (HM), and HM treated with varying concentrations of H₂O₂ and L-ascorbic acid (VC) (assigned as H₂O₂-HM and VC-HM). The concentration of PFRs in HM increased with the addition of VC/H₂O₂ at concentrations less than 0.08 M. The evolution of PFRs in HM under different environmental conditions (e.g., oxic/anoxic and humidity) was investigated. Two types of PFRs were detected in HM: a relatively stable radical existed in the original sample, and the other type, which was generated by redox treatments, was relatively unstable. The spin densities of VC/H₂O₂-HM readily returned to the original value under relatively high humidity and oxic conditions. During this process, the HM-associated “unstable” free radicals released an electron to O₂, inducing the formation of reactive oxygen species (ROS, i.e., ^•OH and ^•O₂⁻). The generated ROS promoted the degradation of polycyclic aromatic hydrocarbons based on the radical quenching measurements. The transformation rates followed the order naphthalene>phenanthrene>anthracene>benzo[a]pyrene. Our results provide valuable insight into the HM-induced transformation of organic contaminants under natural conditions.     

Optimized determination of airborne tetracycline resistance genes in laboratory atmosphere

• Sampling parameters with high efficiency was determined. • Operational process to detect airborne ARGs was optimized. • Providing research basis to control airborne ARGs of a laboratory atmosphere Antibiotic resistance genes (ARGs) have been detected in various atmospheric environments. Airborne ARGs transmission presents the public health threat. However, it is very difficult to quantify airborne ARGs because of the limited availability of collectable airborne particulate matter and the low biological content of samples. In this study, an optimized protocol for collecting and detecting airborne ARGs was presented. Experimental results showed that recovery efficiency tended to increase initially and then declined over time, and a range of 550–780 copies/mm² of capture loading was recommended to ensure that the recovery efficiency is greater than 75%. As the cell walls were mechanically disrupted and nucleic acids were released, the buffer wash protects ARGs dissolution. Three ratios of buffer volume to membrane area in buffer wash were compared. The highest concentrations of airborne ARGs were detected with 1.4 µL/mm² buffer wash. Furthermore, the majority of the cells were disrupted by an ultrasonication pretreatment (5 min), allowing the efficiency ARGs detection of airborne samples. While, extending the ultrasonication can disrupt cell structures and gene sequence was broken down into fragments. Therefore, this study could provide a theoretical basis for the efficient filter collection of airborne ARGs in different environments. An optimized sampling method was proposed that the buffer wash was 1.4 µL/mm² and the ultrasonication duration was 5 min. The indoor airborne ARGs were examined in accordance with the improved protocol in two laboratories. The result demonstrated that airborne ARGs in an indoor laboratory atmosphere could pose the considerable health risk to inhabitants and we should pay attention to some complicated indoor air environment.     

上海市第三方环境检测机构发展现状研究

基于2017—2019年上海市环境检验检测行业资源统计数据,分析了第三方环境检测机构的发展现状及细分领域的营收情况,发现了以大气环境、土壤环境和污染源检测为增长热点等特征。基于对机构改革与市场准入情况、行业集中度与市场竞争关系、机构规模与营收关系等方面的分析,提出第三方环境检测领域存在着诚信机制缺位、机构资质能力薄弱、管理体系运行乏力等风险,提出了提升质量管理和资质建设两大核心竞争力、掌握行业监管动向和重点、参与行业协会建设构建诚信自治模式等对策。     

基于压电传感板的建筑疏散照明技术

在当今世界,电力、能源和安全是人们日常生活的基本要求。为了应对日益增长的能源需求,最终的解决办法是实施可再生能源,然后将其用于人类的安全。可再生能源需要以它们各自正确的方式实施。研究基于压电传感器片的迈步发电装置,并演示了如何利用这些能量实现建筑物疏散照明。我们在传感器的下方和顶部分别固定了木板和可移动网螺栓,利用压电传感器系统,行人可以通过迈步向发电装置施加电能,另外,将硅凝胶粘贴在位于下部木板空洞中的所有传感器顶部。当有人踩到板上时,就会自动施加压力。在木板的顶部和底部设置了一个孔,以便随时调整在底部和顶板之间安装的可移动网螺栓。烟雾传感器用于启动灯光。使用这种设备,我们实现了建筑物疏散路径上的LED灯正常运行。结果表明,这种安全发电的设计和方法具有一定的实用价值,同时也满足了全球对能源的需求。     

真实世界和虚拟场景下行人绕障的实验研究

为了研究利用虚拟现实开展行人疏散实验的有效性以及虚拟场景里不同控制方式的优劣,开展了真实世界与三种不同控制方式(头显-鼠标(HM)、鼠标-鼠标(MM)、键盘-鼠标(KM))下虚拟场景的绕障实验。分析并比较了平均轨迹、绕障距离、绕障起始时间以及归一化时间下的横向距离。实验结果表明,当横向坐标小于1 m时,虚拟场景与真实世界实验平均轨迹的差值在10 cm之内。平均轨迹、绕障距离、绕障起始时间方面,HM更接近真实世界实验;归一化时间下的横向距离方面,MM更接近真实世界实验。