Evaluation of the National Land Cover Database for Hydrologic Applications in Urban and Suburban Baltimore,Maryland1

Smith, Monica Lipscomb, Weiqi Zhou, Mary Cadenasso, Morgan Grove, and Lawrence E. Band, 2010. Evaluation of the National Land Cover Database for Hydrologic Applications in Urban and Suburban Baltimore, Maryland. Journal of the American Water Resources Association (JAWRA) 46(2):429-442. DOI: 10.1111/j.1752-1688.2009.00412.x Abstract: We compared the National Land Cover Database (NLCD) 2001 land cover, impervious, and canopy data products to land cover data derived from 0.6-m resolution three-band digital imagery and ancillary data. We conducted this comparison at the 1 km², 9 km², and gauged watershed scales within the Baltimore Ecosystem Study to determine the usefulness and limitations of the NLCD in heterogeneous urban to exurban environments for the determination of land-cover information for hydrological applications. Although the NLCD canopy and impervious data are significantly correlated with the high-resolution land-cover dataset, both layers exhibit bias at <10 and >70% cover. The ratio of total impervious area and connected impervious area differs along the range of percent imperviousness – at low percent imperviousness, the NLCD is a better predictor of pavement alone, whereas at higher percent imperviousness, buildings and pavement together more resemble NLCD impervious estimates. The land-cover composition and range for each NLCD urban land category (developed open space, low-intensity, medium-intensity, and high-intensity developed) is more variable in areas of low-intensity development. Fine-vegetation land-cover/lawn area is incorporated in a large number of land use categories with no ability to extract this land cover from the NLCD. These findings reveal that the NLCD may yield important biases in urban, suburban, and exurban hydrologic analyses where land cover is characterized by fine-scale spatial heterogeneity.     

Estimation of economic costs of particulate air pollution from road transport in China

Valuation of health effects of air pollution is becoming a critical component of the performance of cost–benefit analysis of pollution control measures, which provides a basis for setting priorities for action. Beijing has focused on control of transport emission as vehicular emissions have recently become an important source of air pollution, particularly during Olympic games and Post-games. In this paper, we conducted an estimation of health effects and economic cost caused by road transport-related air pollution using an integrated assessment approach which utilizes air quality model, engineering, epidemiology, and economics. The results show that the total economic cost of health impacts due to air pollution contributed from transport in Beijing during 2004–2008 was 272, 297, 310, 323, 298 million US$ (mean value), respectively. The economic costs of road transport accounted for 0.52, 0.57, 0.60, 0.62, and 0.58% of annual Beijing GDP from 2004 to 2008. Average cost per vehicle and per ton of PM₁₀ emission from road transport can also be estimated as 106 US $/number and 3584 US $ t^?1, respectively. These findings illustrate that the impact of road transport contributed particulate air pollution on human health could be substantial in Beijing, whether in physical and economic terms. Therefore, some control measures to reduce transport emissions could lead to considerable economic benefit.     

Analysis of 3-year observations of CFC-11, CFC-12 and CFC-113 from a semi-rural site in China

In-situ measurements of atmospheric chlorofluorocarbons (CFCs) can be used to the assess their global and regional emissions and to check for compliance with phase-out schedules under Montreal protocol and its amendments. The atmospheric mixing ratios of CFC-11 (CCl₃F), CFC-12 (CCl₂F₂) and CFC-113 (CCl₂F–CClF₂) have been measured by an automated in-situ GC-ECDs system at the regional Chinese Global Atmosphere Watch (GAW) station Shangdianzi (SDZ), from November 2006 to October 2009. The time series for these three principal CFCs showed large episodic events and background conditions occurred for approximately 30% (CFC-11), 52% (CFC-12) and 56% (CFC-113) of the measurements. The mean background mixing ratios for CFC-11, CFC-12 and CFC-113 were 244.8 ppt (parts per trillion, 10^?12, molar) 539.6 ppt and 76.8 ppt, respectively, for 2006–2009. The enhanced CFC mixing ratios compared to AGAGE sites such as Trinidad Head (THD), US and Mace Head (MHD), Ireland suggest regional influences even during background conditions at SDZ, which is much closer to highly-populated areas. Between 2006 and 2009 background CFCs exhibited downward trends at rates of ?2.0 ppt yr^?1 for CFC-11, ?2.5 ppt yr^?1 for CFC-12 and ?0.7 ppt yr^?1 for CFC-113. De-trended 3-year average background seasonal cycles displayed small fluctuations with peak-to-trough amplitudes of 1.0 ± 0.02 ppt (0.4%) for background CFC-11, 1.3 ± 2.1 ppt (0.3%) for CFC-12 and 0.2 ± 0.4 ppt (0.3%) for CFC-113. On the other hand, during pollution periods these CFCs showed much larger seasonal cycles of 11.2 ± 10.7 ppt (5%) for CFC-11, 7.5 ± 6.5 ppt (2%) for CFC-12 and 1.0 ± 1.2 ppt (1.2%) for CFC-113, with apparent winter minima and early summer maxima. This enhancement was attributed to prevailing wind directions from urban regions in summer and to enhanced anthropogenic sources during the warm season. In general, horizontal winds from northeast showed negative contribution to atmospheric CFCs loading, whereas South Western advection (urban sector: Beijing) had positive contributions.     

3种大型海藻对含铅废水的生物吸附研究

运用批吸附技术研究了海带、裙带菜和条斑紫菜对水溶液中Pb2+的吸附特性。结果表明:pH是影响生物吸附的重要因素,海带和裙带菜吸附Pb2+的适宜pH在3~5之间,紫菜吸附Pb2+的最佳pH为4;在20~40℃范围内,3种海藻对Pb2+的生物吸附非常快,40 min达到吸附平衡,动力学数据符合准二级动力学模型;Langmuir和Freundlich模型成功地拟合了平衡数据。热力学分析表明吸附能够自发进行。红外光谱分析表明,羧基是海带和裙带菜吸附Pb2+的主要官能团。实验结果表明,用这3种海藻吸附剂对水溶液中Pb2+具有较好的吸附性能,海带和裙带菜的吸附容量相近,优于紫菜。     

厌氧折流板式微生物燃料电池堆影响因素研究

微生物燃料电池(MFC)中输出电压/电流的提升,以及反应器体积的扩展放大是其工程化应用的关键。本文构建了一个总体积为6.4 L的新型厌氧折流板式微生物燃料电池堆(ABSMFC)。以葡萄糖作为底物,探讨了阳极材料、液面高程差和水力停留时间(HRT)等因素对ABSMFC性能的影响。结果表明,碳纤维毡作为阳极时,电池单体外电路平均分压(R_(ex)=1 000Ω)为210 mV,填充石墨颗粒后增加到319.8 mV。格室间存在液面高程差时,电池单体、串联和并联的功率密度分别为207.1、181.1和215.7 mW/m~2,当无液面高程差(即水力相连)时为205.8、69.5和151.5 mW/m~2。4个电池单体串联和并联连接时,HRT对ABSMFC的产电稳定性无影响,溶解性COD的去除率和库仑效率均随HRT的增加而升高,且并联效果优于串联。     

基于因子分析法优选河流水体中氮浓度预测方法的研究

定量的河流水体中氮浓度预测方法有很多种,如何优选出预测精度较高的方法一直是学术界多年来致力于研究的重点。本研究采用因子分析法对预测方法的精度评价指标进行分析,并建立了预测方法精度的评价模型,对回归分析法、神经网络法、灰色系统法和增长率统计法4种水体氮浓度预测方法进行综合评估,优选出精度较高的河流水体氮浓度预测模型——BP神经网络预测模型。结果表明,此评估模型对类似研究具有一定的参考价值,能为选择出合适的河流水体氮浓度预测方法提供依据。     

3种浮床植物系统对富营养化水体净化效果研究

研究了风车草(Cyperus alternifolius)、菖蒲(Acorus calamus)和富贵竹(Dracaena sanderiana)3种浮床植物系统对富营养化水体净化效果,试验共持续35 d。结果表明,在水温24～30℃条件下,风车草和菖蒲生长良好,生物量大,而富贵竹生长较差,生物量增加少;3种植物对NH_4~+-N的去除率分别为76.8%、85.5%和53.6%,对TN的去除率分别为69.1%、66.2%和54.4%,对TP的去除率分别为76.9%、84.6%和61.5%,对PO_4~(3-)-的去除率分别为91.7%、91.7%和75%,对真实色度有明显的去除效果;3种植物对氮磷和真实色度去除效果与对照之间均达到显著差异(P0.05),自然沉淀是浊度去除的主要原因,植物吸收同化作用是NH_4~+-N去除的主要途径,植物吸收是溶解性磷去除的主要途径。试验表明,风车草和菖蒲对富营养化水体中氮磷和真实色度有较好的去除效果,可作为富营养化水体治理的优良物种而推广使用。     

活性半焦用于油田含油污水除油的研究

以经济廉价的半焦为原料,制备用于处理油田含油污水的吸附剂。采用高温焙烧活化、水蒸气活化、高压水热活化以及硝酸、氢氧化钾活化等方法对半焦进行活化处理,通过静态吸附实验测定除油率来评价活化效果,重点讨论了氢氧化钾活化条件对除油效果的影响。结果表明:KOH与半焦质量比为6∶1,80℃浸渍3 h,550℃焙烧1.5 h时,制备的活性半焦吸附除油效果最好,除油率可以达到75.6%;活性半焦对油的吸附符合Freund lich吸附方程。利用酸碱滴定法对样品表面酸碱官能团进行分析,发现KOH活化后半焦表面碱性亲油官能团明显增多;通过SEM对半焦的微观结构进行分析,发现KOH活化后半焦产生大量有利于吸附的孔结构。     

ASBBR-二级SBBR-化学除磷组合工艺处理榨菜腌制废水

针对榨菜腌制废水高盐高氮磷高有机物浓度的特征,提出"厌氧序批式生物膜反应器(ASBBR)-二级序批式生物膜反应器(SBBR)-化学除磷"组合处理工艺,在前期对组合工艺中单元工艺的关键工况参数研究的基础上,考察组合工艺的处理效能。实验结果表明,采用该组合工艺,可使进水COD、NH4+-N、TN及PO43--P分别为10 000、345、550和38.5mg/L的榨菜腌制废水,处理出水COD、NH4+-N、TN及PO43--P分别达到93.6、12.3、18和0.1 mg/L,去除率分别为99.1%、96.4%、96.7%和99.9%,出水达到污水综合排放一级标准。     

颗粒物对无电压作用下离子交换膜分离去除铜离子的影响

在无外加电压条件下研究了颗粒物对阳离子交换膜分离去除铜离子效果的影响。选用硅酸、二氧化硅、氧化铝和水杨酸等4种物质作为颗粒物分别进行实验,其添加量均为50 mg/L。Cu2+及其补偿离子K+的浓度分别为0.0787mmol/L(5 mg/L)和0.787 mmol/L,水温为25±1℃,搅拌强度为600 r/min,水力停留时间为12 h。在所述实验条件下运行96 h后,水中无颗粒物干扰时,铜离子去除率为84%;水中存在带负电荷颗粒物(硅酸)和不带电荷颗粒物(二氧化硅和氧化铝)时,铜离子去除率略为下降至81%;而当水中存在带正电荷颗粒物(水杨酸)时,铜离子的去除率进一步下降为79%。研究结果表明带正电荷颗粒物对铜离子的交换去除影响较带负电荷或不带电荷颗粒物大,因为带正电荷颗粒物更易迁移至阳离子交换膜表面甚至进入膜内,并与膜表或膜内离子交换基团结合,从而导致铜离子交换去除明显下降。