不同粒度飞灰中16种微量元素的含量分布

研究了不同粒级的燃煤飞灰中的Ｂａ、Ｂｅ、Ｃｄ、Ｃｒ、Ｃｕ、Ｈｇ、Ｌｉ、Ｍｎ、Ｎｉ、Ｐｂ、Ｓｒ、Ｔｉ、Ｖ、Ｚｎ、Ｚｒ元素的含量分布,煤中元素的含量比及富集因子。     

新型高效污水处理设备--集成一体化生物转筒反应器

介绍了一种新型高效污水处理设备--集成一体化生物转筒反应器(IBDR).IBDR具有微生物浓度高、活性强、生物相分级明显、耐冲击负荷、污泥沉降性能好和不产生污泥膨胀、操作简单灵活、运行成本低等显著特点;并成功地运用于处理餐饮污水和深圳某厂洗涤剂生产废水.在处理餐饮污水时,IBDR比传统的生物转盘处理效果高出20%.     

新型沸石填料间歇硝化反应器的研究

介绍一种新型沸石填料 ,用于提高生物脱氮系统中硝化反应器的硝化性能。试验结果表明 ,应用了沸石填料的硝化反应器的硝化性能得到了显著提高 ,在脱氮效率和速率上 ,与普通生物载体硝化反应器相比具有明显的优势。硝化反应器连续运行 17d ,出水氨氮基本在 1mg/L以下 ,氨氮去除率在 97%以上。该系统停止运行 5 0d后再次启动 ,一周内硝化性能得以恢复     

环境材料及其评价方法

本文综述了环境材料的实质、特点及其与传统材料在主要内涵、研究重点、评价指标体系和材料选择原则的差异 ,并介绍了环境材料的评价体系与方法和设计原则     

Sorption and desorption of Cu and Cd by macroalgae and microalgae

The sorption and desorption of Cu and Cd by two species of brown macroalgae and five species of microalgae were studied. The two brown macroalgae, Laminaria japonica and Sargassum kjellmanianum, were found to have high capacities at pHs between 4.0 and 5.0 while for microalgae, optimum pH lay at 6.7. The presence of other cations in solution was found to reduce the sorption of the target cation, suggesting a competition for sorption sites on organisms. Sorption isotherms obeyed the Freundlich equation, suggesting involvement of a multiplicity of mechanisms and sorption sites. For the microalgae tested, Spirulina platensis had the highest capacity for Cd, followed by Nannochloropsis oculata, Phaeodactylum tricornutum, Platymonas cordifolia and Chaetoceros minutissimus. The reversibility of metal sorption by macroalgae was examined and the results show that both HCl and EDTA solutions were very effective in desorbing sorbed metal ions from macroalgae, with up to 99.5% of metals being recovered. The regenerated biomass showed undiminished sorption performance for the two metals studied, suggesting the potential of such material for use in water and wastewater treatment.     

Determination of 4-tert-octylphenol, 4-nonylphenol and bisphenol A in surface waters from the Haihe River in Tianjin by gas chromatography-mass spectrometry with selected ion monitoring

The estrogenic pollutants 4-tert-octylphenol (OP), 4-nonylphenol (NP) and bisphenol A (BPA) were determined in surface water samples from the Haihe River, Tianjin, China. The analytes were extracted and concentrated from 300 ml acidified water samples by liquid–liquid extractions using dichloromethane, derivatized with trifluoroacetic anhydride, and quantified by gas chromatography–mass spectrometry (GC–MS) with selected ion monitoring (SIM). Among the samples collected from 14 sampling sites, only one sample was found to have a relatively high concentration of BPA (8.30 μg l⁻¹) and NP (0.55 μg l⁻¹). The concentrations of OP, NP and BPA in the other samples were in the range of 18.0–20.2, 106–296 and 19.1–106 ng l⁻¹, respectively. Recoveries for OP, NP and BPA in the spiked water samples were all over 80%.     

The styrene purification performance of biotrickling filter with toluene-styrene acclimatization under acidic conditions

The obvious disadvantages of biotrickling filters (BTFs) are the long start-up time and low removal efficiency (RE) when treating refractory hydrophobic volatile organic compounds (VOCs), which limits its industrial application. It is worthwhile to investigate how to reduce the start-up period of the BTF for treating hydrophobic VOCs. Here, we present the first study to evaluate the strategy of toluene induction combined with toluene-styrene synchronous acclimatization during start-up in a laboratory-scale BTF inoculated with activated sludge for styrene removal, as well as the effects of styrene inlet concentration (0.279 to 2.659 g·m^?3), empty bed residence time (EBRT) (i.e., 136, 90, 68, 45, 34 sec), humidity (7.7% to 88.9%), and pH (i.e., 4, 3, 2.5, 2) on the performance of the BTF system. The experiments were carried out under acidic conditions (pH 4.5) to make fungi dominant in the BTF. The start-up period for styrene in the BTF was shortened to about 28 days. A maximum elimination capacity (EC_max) of 126 g·m^?3·hr^?1 with an RE of 80% was attained when styrene inlet loading rate (ILR) was below 180 g·m^?3·hr^?1. The highest styrene RE(s) [of BTF] that could be achieved were 95% and 93.4%, respectively, for humidity of 7.7% and at pH 2. A single dominant fungal strain was isolated and identified as Candida palmioleophila strain MA-M11 based on the 26S ribosomal RNA gene. Overall, the styrene induction with the toluene-styrene synchronous acclimatization could markedly reduce the start-up period and enhance the RE of styrene. The BTF dominated by fungi exhibited good performance under low pH and humidity and great potential in treating styrene with higher inlet concentrations.

Implications: The application of the toluene induction combined with toluene-styrene synchronous acclimatization demonstrated to be a promising approach for the highly efficient removal of styrene. The toluene induction can accelerate biofilm formation, and the adaptability of microorganisms to styrene can be improved rapidly by the toluene-styrene synchronous acclimatization. The integrated application of two technologies can shorten the start-up period of biotrickling filters markedly and promote its industrial application.     

Characteristics of single atmospheric particles in a heavily polluted urban area of China: size distributions and mixing states

To investigate the chemical composition, size distribution, and mixing state of aerosol particles on heavy pollution days, single-particle aerosol mass spectrometry was conducted during 9–26 October 2015 in Xi’an, China. The measured particles were classified into six major categories: biomass burning (BB) particles, K-secondary particles, elemental carbon (EC)–related particles, metal-containing particles, dust, and organic carbon (OC) particles. BB and EC-related particles were the dominant types during the study period and mainly originated from biomass burning, vehicle emissions, and coal combustion. According to the ambient air quality index, two typical episodes were defined: clean days (CDs) and polluted days (PDs). Accumulation of BB particles and EC-related particles was the main reason for the pollution in Xi’an. Most types of particle size were larger on PDs than CDs. Each particle type was mixed with secondary species to different degrees on CDs and PDs, indicating that atmospheric aging occurred. The mixing state results demonstrated that the primary tracers were oxidized or vanished and that the amount of secondary species was increased on PDs. This study provides valuable information and a dataset to help control air pollution in the urban areas of Xi’an.

Graphical abstract

     

Fenton-混凝法处理焦化废水的试验研究

对Fenton预氧化-混凝法联用技术处理焦化废水进行了研究,探讨了Fenton氧化阶段H2O2投加量、混凝阶段pH值以及混凝剂投加量等因素对焦化废水COD去除率的影响,确定了最佳处理条件.结果表明,Fenton预氧化-混凝法处理焦化废水取得了良好效果,COD去除率达97.5%,为该工艺实际处理焦化废水提供了实验依据.