Analysis and structure prediction of chlorinated polycyclic aromatic hydrocarbons released from combustion of polyvinylchloride

Chlorinated polycyclic aromatic hydrocarbons (Cl-PAHs) released from combustion of polyvinylchloride (PVC) at different furnace temperatures were investigated. A laboratory-scale tube-type furnace with electric heating was utilized to control combustion conditions. Glass fabric filters and adsorbents were used to collect the combustion emissions. Following Soxhlet extraction, concentration and column chromatography purification, isomers separation, selective detection and identification of Cl-PAHs were performed on GC/MS system on the basis of retention data and mass spectra. Their quantification was accomplished by using external standard calibration technique. About 18 Cl-PAHs were determined, most of which were monochlorinated derivatives of naphthalene, biphenyl, fluorene, phenanthrene, anthracene, fluoranthene and pyrene. Only two dichlorophenanthrenes or anthracenes were identified. The possible positions of chlorine atoms attached to the aromatic rings are predicted by quantitative structure-property relationship. The levels of these compounds were in the range of 0.30-29.08 microg/g PVC. The relationship between the formation of Cl-PAHs and PAHs was discussed.     

Chlorination of dibenzofuran and dibenzo-p-dioxin vapor by copper (II) chloride

Dibenzofuran (DF) is formed from phenol and benzene in combustion gas exhaust streams prior to particle collection equipment. Subsequent chlorination at lower temperatures on particle surfaces is a potential source of chlorinated dibenzofuran (CDF). Gas streams containing 8% O₂ and approximately 0.1% DF vapor were passed through particle beds containing copper (II) chloride (0.5% Cu, mass) at temperatures ranging from 200 to 400 °C to investigate the potential for CDF formation during particle collection. Experiment duration was sufficient to provide an excess amount of DF (DF/Cu=3). The efficiency of DF chlorination by CuCl₂ and the distribution of CDF products were measured, with effects of temperature, gas velocity, and experiment duration assessed. Results of a more limited investigation of dibenzo-p-dioxin (DD) chlorination by CuCl₂ to form chlorinated DD (CDD) products are also presented.The efficiency of DF/DD chlorination by CuCl₂ was high, both in terms of CuCl₂ utilization and DF/DD conversion. Total yields of Cl on CDF/CDD products of up to 0.5 mole Cl per mole CuCl₂ were observed between 200 and 300 °C; this suggests that nearly 100% CuCl₂ was utilized, assuming a conversion of two moles of CuCl₂ to CuCl per mole Cl added to DD/DF. In a short duration experiment (DF/Cu=0.3), nearly 100% DF adsorption and conversion to CDF was achieved. The degree of CDF chlorination was strongly dependent on gas velocity. At high gas velocity, corresponding to a gas–particle contact time of 0.3 s, mono-CDF (MCDF) yield was largest, with yields decreasing with increasing CDF chlorination. At low gas velocity, corresponding to a gas–particle contact time of 5 s, octa-CDF yield was largest. DF/DD chlorination was strongly favored at lateral sites, with the predominant CDF/CDD isomers within each homologue group those containing Cl substituents at only the 2,3,7,8 positions. At the higher temperatures and lower gas velocities studied, however, broader isomer distributions, particularly of the less CDD/CDF products, were observed, likely due to preferential destruction of the 2,3,7,8 congeners.     

Magnetic resonance imaging of nonaqueous phase liquid during soil vapor extraction in heterogeneous porous media

Soil vapor extraction (SVE) is commonly used to remediate nonaqueous phase liquids (NAPLs) from the vadose zone. This paper aims to determine the effect of grain size heterogeneity on the removal of NAPL in porous media during SVE. Magnetic resonance imaging (MRI) was used to observe and quantify the amount and location of NAPL in flow-through columns filled with silica gel grains. MRI is unique because it is nondestructive, allowing three-dimensional images to be taken of the phases as a function of space and time. Columns were packed with silica gel in three ways: coarse grains (250-550 microm) only, fine grains (32-63 microm) only, and a core of fine grains surrounded by a shell of coarse grains. Columns saturated with water were drained under a constant suction head, contaminated with decane, and then drained to different decane saturations. Each column was then continuously purged with water-saturated nitrogen gas and images were taken intermittently. Results showed that at residual saturation, a sharp volatilization front moved through the columns filled with either coarse-grain or fine-grain silica gel. In the heterogeneous columns, the volatilization front in the core lagged just behind the shell because gas flow was greater through the shell and decane in the core diffused outward to the shell. When decane saturation in the core was above residual saturation, decane volatilization occurred near the inlet, the relative decane saturation throughout the core dropped uniformly, and decane in the core flowed in the liquid phase to the shell to replenish volatilized decane. These results indicate that NAPL trapped in low-permeability zones can flow to replenish areas where NAPL is lost due to SVE. However, when residual NAPL saturation is reached, NAPL flow no longer occurs and diffusion limits removal from low-permeability zones.     

不同品种茶叶中锗含量的测定与研究

在苏木色精－偏钒酸胺体系中，锗可产生一灵敏的极谱催化波，峰电位为－０．５７Ｖ（ｕｓ ＳＣＥ），检测下限为６．８８８×１０＾－１１ｍｏｌ／ｌ，线性范围为１．３７８×１０＾－１０—１．１０２×１０＾－５ｍｏｌ／ｌ。用催化极谱法测定茶叶中锗，兼具灵敏、准确、快速、简便、选择性好的优点，可用于茶叶样品中锗的定量测定。     

气相色谱法测定水中九种卤代乙酸类化合物研究

建立了液-液萃取气相色谱-双柱-双检测器法测定水中九种卤代乙酸类化合物的检测方法.40 ml水样经4 ml甲基叔丁基醚两次萃取,萃取液经10%硫酸-甲醇50℃衍生后,用气相色谱电子捕获检测器检测.方法检出限为0.6~1.0μg/L,加标回收率75.9%~111%,6次测定的相对标准偏差≤16%.两次萃取显著提高了一氯乙酸和一溴乙酸的回收率,双柱-双检测器有效排除实际样品中假阳性结果,检测结果更准确可靠.     

贵阳市地下水资源评价

在贵阳市市区水文地质调查的基础上,调查分析了该区域地形地貌、地质构造、地下水类型的分布以及地下水补给、径流、排泄情况,并对该区域地下水资源的质量及数量进行了评价,为地下水的开发与保护提供了基础。     

特殊工况下船舶生活污水处理的试验研究

采用厌氧复合床反应器与接触氧化、接触沉淀相结合的工艺,针对实船条件下可能出现的重启动、倾斜、海水及淡水海水交替冲洗厕所和水力负荷增加等情况,进行了特殊工况下船舶生活污水处理的试验研究。结果表明,该组合工艺在设计条件下（HRT为5h）重启动速度较快,可用于海水冲厕所产生的高盐度污水处理,耐受淡水海水交替变化的盐度冲击负荷变化能力较强,具有一定的水力负荷增加潜力,并且不受倾斜影响。     

太湖流域经济增长与环境污染水平的关系研究

环境库兹涅茨曲线（KEC）是描述污染问题与经济发展之间关系的常用模型,一般情况下呈倒“U”形。通过对太湖流域1991-2005年的人均GDP与工业三废排放量之间的关系分析,研究发现,太湖流域的环境库兹涅茨曲线特征为增长的凹曲线,不同于传统的环境库兹涅茨曲线,同时分析了产生这一现象的原因,并从调整经济结构、转变增长方式、发展循环经济方面给出政策建议。     

浅析青岛太阳能光伏发电发展的方向及推广对策

太阳能光伏发电是可再生能源应用的主要方向之一。作为适宜发展太阳能光伏发电的地区,青岛市政电网覆盖区外的诸多海岛具有较好的光伏发电推广应用前景;在市政电网成型地区,道路照明等公共设施用电、新建住宅小区、机关事业单位以及重点用能单位也是具有推广光伏发电的潜力。然而,目前存在的技术瓶颈、激励政策缺乏以及并网发电手续繁琐等因素制约了光伏发电的应用。通过推动光伏发电技术进步及产业发展,并在政策法规以及经济上给予更多鼓励支持,才能促进太阳能光伏发电快速、健康发展。     

一株纤维素降解菌株的分离鉴定及产酶特征研究

利用纤维素为唯一碳源的选择性培养基,通过平板分离法,从造纸废水处理池中分离出一株产纤维素酶菌株。经菌落及菌的形态观察,生理生化实验和16SrDNA鉴定,判断其为一株荧光假单胞菌,被命名为Pseudomonas fluorescens sp.strainYL。通过其生长曲线和产酶动力学研究,对数期比生长速率约为0.125h-1。纤维素酶的产生与细菌的生长紧密相关联。该菌在摇瓶培养中以微晶纤维素唯一碳源时,粗酶液的最高CMC酶活出现在培养78h,达到17.12U/mL。然而以微晶纤维素和葡萄糖作为复合碳源时产酶活性最高,70h左右达92.3U/mL,而以蔗糖作为碳源时活性很小。这些结果表明:仅具有还原性基团的低聚糖才可诱导产纤维素酶,大分子纤维素对酶的诱导表达效果不及小分子还原糖,其酶的诱导生成可能是通过小分子还原糖间接实现的。