Dawson结构磷钨钒杂多酸的表征及其光催化性能

通过FTIR、UV、循环伏安法对自制的Dawson结构磷钨钒杂多酸催化剂的结构及电化学性能进行表征.以甲基橙溶液模拟工业染料废水,考察了磷钨钒杂多酸光催化降解性能的影响因素.实验结果表明:自制磷钨钒杂多酸具有Dawson结构,表现出良好的电化学性能;在磷钨钒杂多酸加入量为1.5 g/L、初始甲基橙质量浓度为10 mg/L、紫外灯功率为500W的条件下,经紫外光照射200 min,甲基橙降解率可达98.3％.     

Review on synthesis of three-dimensional graphene skeletons and their absorption performance for oily wastewater

Water pollution is a global environmental problem that affects the ecosystem severely. Treatment of oily wastewater and organic pollutants is a major challenge that waits to be solved as soon as possible. Adsorbing is one of the most effective strategies to deal with this problem. Three-dimensional (3D) porous adsorbents made of graphene or graphene-based nanomaterials skeletons had attracted more attention in wastewater treatment because of their large surface area, high porosity, low density, high chemical/thermal stability, and steady mechanical properties, which allow different pollutants to easily access and diffuse into 3D networks of adsorbents. This work presents an extensive summarization of recent progress in the synthesis methodologies and microstructures of 3D graphene foams and 3D graphene-based foams and highlights their adsorption performance for oils and organic solvents. Advantages and disadvantages of various preparation strategies are compared and the corresponded structures of these skeletons are studied in detail. Furthermore, the effects of the structures on oil-adsorption properties are analyzed and some data and parameters of the oil-adsorption properties are listed and studied for easier comparison. At last, the future research directions and technical challenges are prospected, which is hoped that the researchers will be inspired to develop the new graphene-based adsorbents.

     

Annual migrations,diving behavior,and thermal biology of Atlantic bluefin tuna, <Emphasis Type="Italic">Thunnus thynnus</Emphasis>, on their Gulf of Mexico breeding grounds

Electronic tags were used to examine the biology of Atlantic bluefin tuna (Thunnus thynnus L.) on their breeding grounds in the Gulf of Mexico (GOM). The hypothesis that movement patterns, diving behavior, and thermal biology change during different stages of the breeding migration was tested. Mature Atlantic bluefin tuna tagged in the western Atlantic and the GOM, were on their breeding grounds from February to June for an average of 39 ± 11 days. The bluefin tuna experienced significantly warmer mean sea surface temperatures (SSTs) within the GOM (26.4 ± 1.6°C) than outside the GOM (20.2 ± 1.9°C). As the bluefin tuna entered and exited the GOM, the fish dove to daily maximum depths of 568 ± 50 and 580 ± 144 m, respectively, and exhibited directed movement paths to and from the localized breeding areas. During the putative breeding phase, the bluefin tuna had significantly shallower daily maximum depths (203 ± 76 m), and exhibited shallow oscillatory dives during the night. The movement paths of the bluefin tuna during the breeding phase were significantly more residential and sinuous. The heat transfer coefficients (K) were calculated for a bluefin tuna in the GOM using the recorded ambient and body temperatures. The K for this fish increased rapidly at the high ambient temperatures encountered in the GOM, and was significantly higher at night in the breeding phase when the fish was exhibiting shallow oscillatory dives. This suggests that the fish were behaviorally and physiologically thermoregulating in the Gulf of Mexico. This study demonstrates that the movement patterns, diving behavior, and thermal biology of Atlantic bluefin tuna change significantly at different stages of the breeding migration and can be used to define spawning location and timing. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users.     

Sampling and analysis of ambient dioxins in northern Taiwan

In this study, ambient air samples were taken concurrently in the vicinity area of a large-scale municipal waste incinerator (MWI) and the background area for measuring polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) concentrations from November 1999 through July 2000 in northern Taiwan. The results obtained from eighteen ambient air samples indicate that the mean PCDD/F concentration of seventeen 2,3,7,8-substituted congeners in wintertime (188–348 fg-I-TEQ/m³) is significantly higher than that measured in summertime (56–166 fg-I-TEQ/m³). In addition, the seasonal PCDD/F concentrations are compared with the ambient air quality data including CO, NO₂, PM₁₀ and TSP sampled from Taipei area to gain better insights. It indicates that the variation of ambient air PCDD/F concentrations is closely correlated with that of PM₁₀ concentrations. Besides, the results indicate that the I-TEQ concentration of ambient air in sampling site B (directly downwind of the MWI) is of the highest while the sampling site A (upwind of MWI) is of the lowest among all sampling sites. This implies that existing MWI can be a significant emitter of PCDD/Fs in this area. Furthermore, the patterns of the PCDD/F congener distribution at all sampling sites (including the background site in Taoyuan) are quite similar. OCDD concentration is of the highest among seventeen PCDD/F congeners investigated and accounts for about 35% of the total concentration. As for the I-TEQ concentrations, 2,3,4,7,8-PeCDF is the most significant contributor, generally being responsible for 30–45% of the total I-TEQ values depending on the sampling sites and seasons.     

京杭大运河(杭州段)两侧浅层地下水中铁、锰含量偏高的成因分析

本研究以环境水文地球化学理论为基础并采用数理统计的方法,对研究区地下水样和土样的分析数据进行了处理。通过浸滤模拟试验、红外光谱和差热分析等实验手段,对京杭大运河(杭州段)两侧浅层地下水中铁、锰含量偏高的成因进行了探讨。结果表明,该区地下水中铁、锰主要来自含水粘性土层,本区还原的介质环境及特有的地质条件对铁、锰含量偏高有直接影响。     

Distribution of heavy metals in the Grand Canal (Hangzhou section) and its contributing factors

ＤｉｓｔｒｉｂｕｔｉｏｎｏｆｈｅａｖｙｍｅｔａｌｓｉｎｔｈｅＧｒａｎｄＣａｎａｌ（Ｈａｎｇｚｈｏｕｓｅｃｔｉｏｎ）ａｎｄｉｔｓｃｏｎｔｒｉｂｕｔｉｎｇｆａｃｔｏｒｓＷｅｎｇＨｕａｎｘｉｎ，ＺｈａｎｇＤｅｎｇｒｏｎｇＤｅｐａｒｔｍｅｎｔｏｆＥａｒｔｈ...     

大口径薄壁无缝铝管变薄旋压工艺

介绍采用离心铸坯——变薄旋压方法制作大口径薄壁铝管的工艺.包括简要工艺流程、特点、适用范围等.该工艺为解决国内大口径薄壁无缝铝管提供了新的途径.     

Sustainability of rice production systems: an empirical evaluation to improve policy

An evaluation is needed to monitor the progress of sustainable development (SD) in rice production systems. The purpose of this study is to provide policy inputs, examine the sustainability of rice production, and determine major policy areas. A requisite set of 12 indicators of three dimensions of SD, namely economic, was generated by employing an assemblage of top–down and bottom–up approaches. The data were gathered from farm households’ survey as well as in-depth discussion with stakeholders from the regions that represent irrigated, rain-fed lowland, rain-fed upland, flood-prone, and saline-prone rice-growing ecosystems in Bangladesh. By constructing composite indicators, the results revealed that 44 % of rice growers were economically viable, environmentally sound, and socially developed. The irrigated rice production system was found to be the most sustainable. The path analysis measured the contribution of the indicators to the index, and results highlighted that rice growers’ knowledge, skills, and social networks development, improving land productivity, and integrated nutrient management were essential for promoting sustainable rice production. However, the study findings suggest that pluralistic (i.e., government and non-government) agricultural advisory services can serve as an engine of transition to rice production sustainability in which a multi-year planning and strategy formulation are crucial besides investing in the modernization of extension services. Overall and ecosystem-specific policy implications that emerged from the findings of this study are outlined.     

Tie them up tight: wrapping by Philoponella vicina spiders breaks, compresses and sometimes kills their prey

We show that uloborid spiders, which lack the poison glands typical of nearly all other spiders, employ thousands of wrapping movements with their hind legs and up to hundreds of meters of silk line to make a shroud that applies substantial compressive force to their prey. Shrouds sometimes break the prey’s legs, buckle its compound eyes inward, or kill it outright. The compressive force apparently results from the summation of small tensions on sticky lines as they are applied to the prey package. Behavioral details indicate that wrapping is designed to compact prey; in turn, compaction probably functions to facilitate these spiders’ unusual method of feeding. This is the first demonstration that prey wrapping by spiders compacts and physically damages their prey, rather than simply restraining them.