Risk assessment for selected xenobiotics by bioassay methods with higher plants

Different bioassays with higher plants were approved for use in a bioassay procedure for testing of xenobiotics according to the German Chemicals Act. Selected environmental pollutants (atrazine, cadmium chloride, 2,6-dichlorobenzonitrile, pentachlorophenol, potassium dichromate, thiourea), all from a list of reference chemicals, were tested with these methods. Dose-response curves for growth of oats and turnips were evaluated in soil and vermiculite (nonsorptive substrate), and availability to plants was calculated by comparing the EC₅₀ values for one chemical in both substrates. The most active chemical was atrazine, followed by 2,6-dichlorobenzonitrile, pentachlorophenol, potassium dichromate, cadmium chloride, and thiourea. The least available compound to plants was pentachlorophenol, tested with turnips (Brassica rapa var.rapa). The strongest inhibition of germination, demonstrated in an in vitro assay with garden cress (Lepidium sativum), was found with 2,6-dichlorobenzonitrile, the lowest with atrazine. The effect of an extended exposure of the plants to the chemicals was evaluated in a long-term bioassay with oats (Avena sativa) in hydroponic culture. Several dose-response curves during the growing period were derived. It was found that the EC₅₀ values for atrazine and thiourea decreased markedly during the first four weeks; thereafter the changes were much smaller. As an overall conclusion, a bioassay procedure is proposed that can be included in the graduated plan recommended by the German Chemicals Act.     

Importance of landscape heterogeneity to wood storks in Florida Everglades

Declines in populations of and reproductive success of wood storks and other wading birds have occurred in the Florida Everglades over the past several decades. These declines have been concurrent with major changes in the Everglades’ landscape characteristics. Among the plausible hypotheses that relate to landscape change are the following: (1) general loss of habitat; (2) heavy loss of specific habitat, namely, short-hydroperiod wetlands that provide high prey availability early in the breeding season; and (3) an increase in frequency of major drying out of the central slough areas, which can affect prey availability late in the breeding season. These three hypotheses were compared using an individual-based model of wood stork (Mycteria americana) reproduction. This model simulated the behavior and energetics of each individual wood stork in a breeding colony on 15-min time intervals. Changes in water depth and prey availability occurred on daily time steps. Simulation results showed a threshold response in reproductive success to reduction of wetland heterogeneity. Model comparisons in which (1) only short-hydroperiod wetlands were removed and (2) wetlands of both long and short hydroperiods were removed showed that, for the same loss of total area, the specific habitat removal caused a much greater reduction in wood stork reproduction, indicating hypothesis 2 may be a more likely explanation than hypothesis 1. Reduction of initial prey availability in the central slough areas (simulating frequent drying; hypothesis 3) reduced fledging success by an average of more than 90% in the model.     

Do mites phoretic on elm bark beetles contribute to the transmission of Dutch elm disease?

Dutch elm disease (DED) is a destructive vascular wilt disease of elm (Ulmus) trees caused by the introduced Ascomycete fungus Ophiostoma novo-ulmi. In Europe, this DED pathogen is transmitted by elm bark beetles in the genus Scolytus. These insects carry phoretic mites to new, suitable habitats. The aim of this study was to record and quantify conidia and ascospores of O. novo-ulmi on phoretic mites on the three elm bark beetle species Scolytus multistriatus, Scolytus pygmaeus, and Scolytus scolytus. Spores of O. novo-ulmi were found on four of the ten mite species phoretic on Scolytus spp. These included Elattoma fraxini, Proctolaelaps scolyti, Pseudotarsonemoides eccoptogasteri, and Tarsonemus crassus. All four species had spores attached externally to their body surfaces. However, T. crassus carried most spores within its sporothecae, two paired pocket-like structures adapted for fungal transmission. Individuals of Pr. scolyti also had O. novo-ulmi conidia and ascospores frequently in their digestive system, where they may remain viable. While E. fraxini and P. eccoptogasteri rarely had spores attached to their bodies, large portions of Pr. scolyti and T. crassus carried significant numbers of conidia and/or ascospores of O. novo-ulmi. P. scolyti and T. crassus, which likely are fungivores, may thus contribute to the transmission of O. novo-ulmi, by increasing the spore loads of individual Scolytus beetles during their maturation feeding on twigs of healthy elm trees, enhancing the chance for successful infection with the pathogen. Only S. scolytus, which is the most efficient vector of O. novo-ulmi in Europe, carried high numbers of Pr. scolyti and T. crassus, in contrast to S. multistriatus and S. pygmaeus, which are known as less efficient vectors. The high efficiency of S. scolytus in spreading Dutch elm disease may be partly due to its association with these two mites and the hyperphoretic spores of O. novo-ulmi they carry.     

Two pathways ensuring social harmony

Reproductive division of labour is a characteristic trait of social insects. The dominant reproductive individual, often the queen, uses chemical communication and/or behaviour to maintain her social status. Queens of many social insects communicate their fertility status via cuticle-bound substances. As these substances usually possess a low volatility, their range in queen–worker communication is potentially limited. Here, we investigate the range and impact of behavioural and chemical queen signals on workers of the ant Temnothorax longispinosus. We compared the behaviour and ovary development of workers subjected to three different treatments: workers with direct chemical and physical contact to the queen, those solely under the influence of volatile queen substances and those entirely separated from the queen. In addition to short-ranged queen signals preventing ovary development in workers, we discovered a novel secondary pathway influencing worker behaviour. Workers with no physical contact to the queen, but exposed to volatile substances, started to develop their ovaries, but did not change their behaviour compared to workers in direct contact to the queen. In contrast, workers in queen-separated groups showed both increased ovary development and aggressive dominance interactions. We conclude that T. longispinosus queens influence worker ovary development and behaviour via two independent signals, both ensuring social harmony within the colony.     

Skimming behaviour and spreading potential of Stenus species and Dianous coerulescens (Coleoptera: Staphylinidae)

Rove beetles of the genus Stenus Latreille and the genus Dianous Leach possess pygidial glands containing a multifunctional secretion of piperidine and pyridine-derived alkaloids as well as several terpenes. One important character of this secretion is the spreading potential of its different compounds, stenusine, norstenusine, 3-(2-methyl-1-butenyl)pyridine, cicindeloine, α-pinene, 1,8-cineole and 6-methyl-5-heptene-2-one. The individual secretion composition enables the beetles to skim rapidly and far over the water surface, even when just a small amount of secretion is emitted. Ethological investigations of several Stenus species revealed that the skimming ability, skimming velocity and the skimming behaviour differ between the Stenus species. These differences can be linked to varied habitat claims and secretion saving mechanisms. By means of tensiometer measurements using the pendant drop method, the spreading pressure of all secretion constituents as well as some naturally identical beetle secretions on the water surface could be established. The compound 3-(2-methyl-1-butenyl)pyridine excelled stenusine believed to date to be mainly responsible for skimming relating to its surface activity. The naturally identical secretions are not subject to synergistic effects of the single compounds concerning the spreading potential. Furthermore, evolutionary aspects of the Steninae’s pygidial gland secretion are discussed.     

Reducing dust exposure in indoor climbing gyms

As users of indoor climbing gyms are exposed to high concentrations (PM(10) up to 4000 μg m(-3); PM(2.5) up to 500 μg m(-3)) of hydrated magnesium carbonate hydroxide (magnesia alba), reduction strategies have to be developed. In the present paper, the influence of the use of different kinds of magnesia alba on dust concentrations is investigated. Mass concentrations, number concentrations and size distributions of particles in indoor climbing gyms were determined with an optical particle counter, a synchronized, hybrid ambient real-time particulate monitor and an electrical aerosol spectrometer. PM(10) obtained with these three different techniques generally agreed within 25%. Seven different situations of magnesia alba usage were studied under controlled climbing activities. The use of a suspension of magnesia alba in ethanol (liquid chalk) leads to similar low mass concentrations as the prohibition of magnesia alba. Thus, liquid chalk appears to be a low-budget option to reduce dust concentrations. Magnesia alba pressed into blocks, used as powder or sieved to 2-4 mm diameter, does not lead to significant reduction of the dust concentrations. The same is true for chalk balls (powder enclosed in a sack of porous mesh material). The promotion of this kind of magnesia alba as a means of exposure reduction (as seen in many climbing gyms) is not supported by our results. Particle number concentrations are not influenced by the different kinds of magnesia alba used. The particle size distributions show that the use of magnesia alba predominantly leads to emission of particles with diameters above 1 μm.     

The effect of atmospheric thermal conditions and urban thermal pollution on all-cause and cardiovascular mortality in Bangladesh

This study assessed the effect of temperature and thermal atmospheric conditions on all-cause and cardiovascular mortality in Bangladesh. In particular, differences in the response to elevated temperatures between urban and rural areas were investigated. Generalized additive models (GAMs) for daily death counts, adjusted for trend, season, day of the month and age were separately fitted for urban and rural areas. Breakpoint models were applied for determining the increase in mortality above and below a threshold (equivalent) temperature. Generally, a 'V'-shaped (equivalent) temperature-mortality curve with increasing mortality at low and high temperatures was observed. Particularly, urban areas suffered from heat-related mortality with a steep increase above a specific threshold. This adverse heat effect may well increase with ongoing urbanization and the intensification of the urban heat island due to the densification of building structures. Moreover, rising temperatures due to climate change could aggravate thermal stress.     

How do different process options and evaluation settings affect economic and environmental assessments? A case study on methyl methacrylate (MMA) production processes

We present an investigation on how economic and environmental assessment results change when different process options or evaluation settings are considered. As the main case study the production technology of methyl methacrylate (MMA) is investigated. Six commercial processes using different reaction routes are modelled and evaluated with respect to their economic and environmental performance. On these six base case models different process options and evaluation settings are considered and the resulting impacts on the assessment results are quantified. Major findings of the study are that the more decision-variables become fixed, the smaller becomes the impact of the decisions still to be taken—but not only with respect to the economic performance but also with regard to the environmental assessment result. Along the process development steps the potential impacts on the economic and environmental performance decrease to the same degree. The results obtained for the evaluation settings do not show such a systematic pattern as those for the process options. This finding indicates that decision makers face many options in the economic and especially the environmental assessment of chemical processes which might lead to quite different magnitudes in variability due to either the choice of method or the choice of method parameters. This paper demonstrates that the resulting variability might be crucial with respect to the decision making outcome.     

Finger and hand protection on circular table and panel saws

Several hundred accidents involving the use of circular saws and resulting in injury, to hands or fingers occur each year in Germany.In the presented project, new approaches for the prevention of hand injuries and for the contactless detection of fingers are being investigated for comprehensive protection on circular saws. The basic principles can be applied to other machines with manual loading and/or unloading. This paper describes several principles to distinct human skin and wood and a safety guard that prevents touching the rotating blade. In a first approach a reliable protective device with functional diversity has been developed using a passive infrared sensor in combination with a capacitive field sensor. Second the distinction between skin and wood or other material is done by dedicated kind of spectral analysis in the near infrared region. With a kind of light curtain the intrusion into the dangerous zone near the blade can be prevented.The safety guard protects the operator’s hand within 50 ms. The forces of the protective system peak at no more than 120 N. We are presenting a complete strategy for such different tasks as cutting wedges, stopped cutting and hidden cutting, which have a very high odds ratio.