Species- and stage-specific differences in trace element tissue concentrations in amphibians: implications for the disposal of coal-combustion wastes

Information on species- and stage-specific patterns of contaminant accumulation is generally lacking for amphibians, yet such information could provide valuable knowledge on how amphibians interact with contaminants. We assessed concentrations of As, Cd, Cu, Ni, Pb, Se, Sr, and Zn in whole bodies of larval, recently metamorphosed, and adult life stages in Bufo terrestris and Rana sphenocephala from a site that currently receives coal combustion waste (CCW) discharge, a site where CCW was formerly discharged that has undergone natural attenuation for 30 years, and a nearby reference site. For the majority of elements (As, Cd, Cu, Ni, Pb, Zn), concentrations were highest in larvae, but Se and Sr concentrations remained elevated in later life stages, likely because these elements are S and Ca analogs, respectively, and are thus retained throughout structural changes during metamorphosis. Element concentrations were generally higher in B. terrestris than in R. sphenocephala. Concentrations of As, Se, and Sr were up to 11-35 times higher in metamorphs emigrating from CCW-polluted wetlands compared to unpolluted wetlands, suggesting metamorphosed amphibians can transport trace elements from aquatic disposal basins to nearby uncontaminated terrestrial habitats. In addition, anurans utilizing naturally revegetated sites up to 30 years after CCW disposal ceases are exposed to trace elements, although to a lesser degree than sites where CCW is currently discharged.     

Continuous determination of fine particulate matter mass in the Salt Lake City Environmental Monitoring project: a comparison of real-time and conventional TEOM monitor results

Fine particulate matter (PM2.5) mass was determined on a continuous basis at the Salt Lake City Environmental Protection Agency Environmental Monitoring for Public Awareness and Community Tracking monitoring site in Salt Lake City, UT, using three different monitoring techniques. Hourly averaged PM2.5 mass data were collected during two sampling periods (summer 2000 and winter 2002) using a real-time total ambient mass sampler (RAMS), sample equilibration system (SES)-tapered element oscillating microbalance (TEOM), and conventional TEOM monitor. This paper compares the results obtained from the various monitoring systems, which differ in their treatment of semivolatile material (SVM; particle-bound water, semivolatile ammonium nitrate, and semivolatile organic compounds). PM2.5 mass results obtained by the RAMS were consistently higher than those obtained by the SES-TEOM and conventional TEOM monitors because of the RAMS ability to measure semivolatile ammonium nitrate and semivolatile organic material but not particle-bound water. The SES-TEOM monitoring system was able to account for an average of 28% of the SVM, whereas the conventional TEOM monitor loses essentially all of the SVM from the single filter during sampling. Occasional mass readings by the various TEOM monitors that are higher than RAMS results may reflect particle-bound water, which, under some conditions, is measured by the TEOM but not the RAMS.     

Relationship between the ATP content of subsurface material and the rate of biodegradation of alkylbenzenes and chlorobenzene

The rate of biotransformation of toluene in unconsolidated subsurface material from sites at Lula, Oklahoma, and Conroe, Texas, was compared to the ATP (adenosine triphosphate) content of these materials. The rate of toluene degradation decreased with decreasing ATP content. When ATP contents were at or less than 0.05 ng g⁻¹, biotransformation of toluene could not be detected (less than 1% of the initial concentration was degraded per week). At intermediate concentrations of ATP, 0.37 and 0.16 ngvg⁻¹, the rates of toluene degradation were 18 ± 4.5% and 25 ± 10% of the initial concentration per week. At ATP concentrations above 1 ng g⁻¹, the rates of toluene degradation exceeded 90% of the initial concentration per week. There was no simple relationship between ATP content and chlorobenzene degradation. Subsurface material that had been exposed to creosote wastes, and which degraded toluene rapidly, also degraded benzene, o-xylene, and m-xylene.     

Transfer of selenium from prey to predators in a simulated terrestrial food chain

Little is known about the accumulation and effects of selenium in reptiles. We developed a simplified laboratory food chain where we fed commercial feed laden with seleno-D,L-methionine (30 microg/g dry mass) to crickets (Acheta domestica) for 5-7 d. Se-enriched crickets (approximately 15 microg/g Se [dry mass]) were fed to juvenile male and female lizards (Sceloporus occidentalis) for 98 d while conspecifics were fed uncontaminated crickets. Lizards fed contaminated prey accumulated Se concentrations ranging from 9.3 (in female carcass) to 14.1 (in female gonad) microg/g compared to <1.5 microg/g in tissues of controls. Female gonad concentrations approached the highest of thresholds for reproductive toxicity in oviparous vertebrates. However, we observed no consistent effect of dietary treatment on sublethal parameters or survival. Our simplified food chain proved to be an ecologically relevant method of exposing lizards to Se, and forms the foundation for future studies on maternal transfer and teratogenicity of Se.     

Rebuilding after the tsunami: getting it right

The practice of integrated coastal management (ICM) has matured sufficiently since its beginnings in the early 1980s to suggest a set of principles that could be used to guide the massive investments that will be made over the next several years to rehabilitate and reconstruct the thousands of kilometers of coastlines devastated by the 26 December 2004 tsunami. We offer six principles to guide what can be done to make coastal communities less vulnerable, to improve the conditions of the poor, and to avoid repeating the mistaken judgements that have been made in the past about how shorelines are allocated and developed. We then offer a set of five principles to guide how action plans are formulated and implemented. These stress the critical importance of tailoring principles to the unique conditions and needs of each place. The roles of national government in setting policies to guide a decentralized planning and decision-making process are distinguished from a negotiation process that engages the people of the place in a bottom-up application of ICM good practices.     

A field study of triclosan loss rates in river water (Cibolo Creek, TX)

Triclosan (TCS) is an anti-microbial agent used in down-the-drain consumer products. Following sewage treatment some of the triclosan will enter receiving waters. This study was designed to determine the die-away rate of triclosan released into a river as part of the sewage treatment plant effluent matrix. The study was conducted in Cibolo Creek, a moderate sized stream (discharge approximately 0.1 m(3)s(-1)) located in South Central Texas. Triclosan was analyzed from samples collected upstream of the sewage treatment plant, the sewage treatment plant effluent, and the river downstream from the effluent discharge. The first-order loss rate of parent triclosan from the water column was calculated from measured data (0.06 h(-1)) and this rate corresponded to a 76% reduction in triclosan over an 8 km river reach below the discharge. Mathematical modeling indicated that sorption and settling accounted for approximately 19% of total triclosan loss over 8 km. When removing sorption and settling, the remaining amount of triclosan had an estimated first-order loss rate of 0.25 h(-1). This loss rate was presumably due to other processes such as biodegradation and photolysis. These data show that loss of parent triclosan from the water column is rapid. Additional data are needed to fully document loss mechanisms.     

Evaluation of the RAMS continuous monitor for determination of PM2.5 mass including semi-volatile material in Philadelphia,PA

The real-time ambient mass sampler (RAMS) is a continuous monitor based on particle concentrator, denuder, drier, and tapered element oscillating microbalance (TEOM) monitor technology. It is designed to measure PM2.5 mass, including the semi-volatile species NH4NO3 and semi-volatile organic material, but not to measure PM2.5 water content. The performance of the RAMS in an urban environment with high humidity was evaluated during the July 1999 NARSTO-Northeast Oxidant and Particles Study (NEOPS) intensive study at the Baxter water treatment plant in Philadelphia, PA. The results obtained with the RAMS were compared to mass measurements made with a TEOM monitor and to constructed mass obtained with a Particle Concentrator-Brigham Young University Organic Sampling System (PC-BOSS) sampler designed to determine the chemical composition of fine particles, including the semi-volatile species. An average of 28% of the fine particulate material present during the study was semi-volatile organic material lost from a filter during particle collection, and 1% was NH4NO3 that was also lost from the particles during sampling. The remaining mass was dominantly nonvolatile (NH4)2SO4 (31%) and organic material (37%), with minor amounts of soot, crustal material, and nonvolatile NH4NO3. Comparison of the RAMS and PC-BOSS results indicated that the RAMS correctly monitored for fine particulate mass, including the semivolatile material. In contrast, the heated filter of the TEOM monitor did not measure the semi-volatile material. The comparison of the RAMS and PC-BOSS data had a precision of +/-4.1 microg/m3 (+/-9.6%). The precision of the RAMS data was limited by the uncertainty in the blank correction for the reversible adsorption of water by the charcoal-impregnated cellulose sorbent filter of the RAMS monitor. The precision of the measurement of fine particulate components by the PC-BOSS was +/-6-8%.     

A new environmental chamber for evaluation of gas-phase chemical mechanisms and secondary aerosol formation

A new state-of-the-art indoor environmental chamber facility for the study of atmospheric processes leading to the formation of ozone and secondary organic aerosol (SOA) has been constructed and characterized. The chamber is designed for atmospheric chemical mechanism evaluation at low reactant concentrations under well-controlled environmental conditions. It consists of two collapsible 90 m³ FEP Teflon film reactors on pressure-controlled moveable frameworks inside a temperature-controlled enclosure flushed with purified air. Solar radiation is simulated with either a 200 kW Argon arc lamp or multiple blacklamps. Results of initial characterization experiments, all carried out at 300–305 K under dry conditions, concerning NO_x and formaldehyde offgasing, radical sources, particle loss rates, and background PM formation are described. Results of initial single organic–NO_x and simplified ambient surrogate–NO_x experiments to demonstrate the utility of the facility for mechanism evaluation under low NO_x conditions are summarized and compared with the predictions of the SAPRC-99 chemical mechanism. Overall, the results of the initial characterization and evaluation indicate that this new environmental chamber can provide high quality mechanism evaluation data for experiments with NO_x levels as low as 2 ppb, though the results indicate some problems with the gas-phase mechanism that need further study. Initial evaluation experiments for SOA formation, also carried out under dry conditions, indicate that the chamber can provide high quality secondary aerosol formation data at relatively low hydrocarbon concentrations.     

Ozone and bean plants: morphology matters

Relationship between leaf morphology and cultivar sensitivity to ozone were established.     

Designing monitoring networks to represent outdoor human exposure

Measurements of outdoor human exposure to suspended particulate matter (PM) are always constrained by available resources. An effective network design requires tradeoffs between variables measured, the number of sampling locations, sample duration, and sampling frequency. Sampling sites are needed to represent neighborhood and urban spatial scales with minimal influences from nearby sources. Although most PM measurements for determining compliance with standards are taken over 24-h periods every third to sixth day, outdoor human exposure assessment requires measurements taken continuously throughout the day, preferably over durations of 1 h or less. More detailed particle size and chemistry data are also desirable, as smaller size fractions and specific chemicals may be better indicators of adverse health effects than total mass samples.