Natural attenuation of trichloroethene and its degradation products at a lake-shore site

Subsurface contamination by trichloroethene (TCE) was detected at a Michigan National Priorities List (NPL) site in 1982. The TCE plume resulted from the disposal of spent solvent and other chemicals at an industrial facility located in the eastern shore of Lake Michigan. TCE degradation products of three dichloroethene (DCE) isomers, vinyl chloride (VC) and ethene were present. The plume was depleted of oxygen and methanogenic at certain depths. Transects of the plume were sampled by slotted auger borings the year after the TCE plume was first discovered. Water samples were also taken from lake sediments to a depth of 12 m about 100 m offshore. Later samples were taken along the shoreline of the lake with a hand-driven probe. Later in 1998 water was taken from sediments about 3-m from the shoreline. The average concentration of each chemical and net apparent base coefficient between appropriate pairs of transects between the lower site and lakeshore were calculated. Loss rates were then calculated from an analytical solution of the two-dimensional advective-dispersive-reactive transport equation. Net apparent rate coefficients and a set of coupled reaction rate equations were used to extract the apparent loss coefficients. This study showed the field evidence for natural attenuation of TCE.     

Sorption of mercury (II) in Amazon soils from column studies

The sorption of Hg (II) onto four different types of Amazon soils from the A-horizon was investigated by means of column experiments under saturation conditions and controlled metal load. Higher organic matter contents in the soil resulted in higher Hg (II) adsorptions, reaching values as high as 3.8 mg Hg g⁻¹ soil. The amount of mercury adsorbed on a soil column (Q) shows a very poor correlation with soil clay content (r² = 0.2527), indicating that Hg sorption in these topsoil samples is chiefly governed by the organic matter content. Desorption experiments using Negro River (Amazon) waters were conducted using soil saturated with Hg (II) in order to better understand the metal leaching mechanism. The amount of Hg (II) released from soils was around 30% of the total sorbed mercury upon saturation, suggesting that mercury sorption in the soils present in the catchment area of the Negro River basin is not a reversible process.     

Backward location and travel time probabilities for a decaying contaminant in an aquifer

Backward location and travel time probabilities can be used to determine the prior position of contamination in an aquifer. These probabilities, which are related to adjoint states of concentration, can be used to improve characterization of known sources of groundwater contamination, to identify previously unknown contamination sources, and to delineate capture zones. The first contribution of this paper is to extend the adjoint model to the case of a decaying solute (first-order decay), and to describe two different interpretations of backward probabilities. The conventional interpretation accounts for the probability that a contaminant particle could decay before reaching the detection location. The other interpretation is conditioned on the fact that the detected contaminant particle actually reached the detection location, despite this possibility of decay. In either case, travel time probabilities are skewed toward earlier travel times, relative to a conservative solute. The second contribution of this paper is to verify the load term for a monitoring well observation. We provide examples using one-dimensional models and hypothetical aquifers. We employ an infinite domain in order to verify the monitoring well load. This new but simple one-dimensional adjoint solution can also be used to verify higher-dimensional numerical models of backward location and travel time probabilities. We employ a semi-infinite domain to illustrate the effect of decay on backward models of pumping well probabilistic capture zones. Decay causes the capture zones to fall closer to the well.     

Chapter one: exposure measurements

Determining human exposure to suspended particulate concentrations requires measurements that quantify different particle properties in microenvironments where people live, work, and play. Particle mass, size, and chemical composition are important exposure variables, and these are typically measured with time-integrated samples on filters that are later submitted to laboratory analyses. This requires substantial sample handling, quality assurance, and data reduction. Newer technologies are being developed that allow in-situ, time-resolved measurements for mass, carbon, sulfate, nitrate, particle size, and other variables. These are large measurement systems that are more suitable for fixed monitoring sites than for personal applications. Human exposure studies need to be designed to accomplish specific objectives rather than to serve too many purposes. Resources need to be divided among study design, field sampling, laboratory analysis, quality assurance, data management, and data analysis phases. Many exposure projects allocated too little to the non-measurement activities.     

Aquatic microcosm assessment of the effects of tylosin on Lemna gibba and Myriophyllum spicatum

Tylosin is a macrolide antibiotic commonly used for therapeutic treatment and prophylaxis in livestock. As part of a larger ecotoxicological study, the potential phytotoxic effects of tylosin on the rooted macrophyte Myriophyllum spicatum and the floating macrophyte Lemna gibba were assessed under semi-field conditions using 15 12 000-L microcosms. Concentrations of 0, 10, 30, 300 microg/L (n = 3), and 600, 1000, and 3000 microg/L (n = 1) were evaluated as part of separate ANOVA and regression analyses over an exposure period of 35 days. Fate of tylosin was monitored over time in the highest three treatments, where dissipation followed pseudo-first order kinetics with associated half-lives ranging from 9 to 10 days. For both M. spicatum and L. gibba, tylosin was found to cause no biologically significant changes to any endpoint assessed compared to controls at a Type I error rate of 0.1. However, subsequent power analyses revealed that there was generally insufficient power to declare that there were no significant differences at a Type II error rate of 0.2. Conclusions concerning biologically significant impacts were therefore further assessed based on other statistical criteria including comparisons of percent differences between replicated treatments and controls, minimum significant and minimum detectable differences, and coefficients of variation. Based on these criteria, at an ecological effect size of >20% change, tylosin was concluded to elicit no biologically or ecologically significant toxicity to M. spicatum or L. gibba. A hazard quotient assessment indicated that tylosin poses little risk to either species of macrophyte, with an HQ value calculated to be nearly three orders of magnitude below 1 (0.002).     

Impact of heating and air conditioning system operation and leakage on ventilation and intercompartment transport: studies in unoccupied and occupied Tennessee Valley homes

Forced-air heating and air conditioning (HAC) systems caused an average and maximum increase in air infiltration rates of 1.8- and 4.3-fold, respectively, during brief whole-house studies of tracer gas decay in 39 occupied houses. An average increase in air infiltration rate of 0.33 +/- 0.37 h-1 corresponded to an incremental air leak of 240 m3/h, based on approximate house volume. More detailed tracer gas decay studies were performed in basement, kitchen and bedroom locations of six homes with low air infiltration rates (i.e., less than 0.25 h-1). The HAC mixed the indoor air efficiently between measurement sites. HAC operation also caused 1.1- to 3.6-fold increases in air infiltration rates, corresponding to absolute increases of 0.02 to 0.1 h-1. In an unoccupied research house, three-fold increases in average air infiltration rate with HAC operation (i.e., from 0.13 to 0.36 h-1) were reduced to two-fold (i.e., from 0.10 to 0.18 h-1) by sealing the external HAC unit and crawlspace ductwork system. This sealing also resulted in a 30 percent reduction in crawlspace-to-indoor transport rates with the HAC turned on. Blower door tests indicated a less than 20 percent reduction in house leakage area.     

How nepotistic is the brain worm?

Summary The evolution of altruism does not necessarily require an extreme amount of kinship. This point is illustrated with an analysis of altruistic behavior in the Trematode parasite Dicrocoelium dendriticum, which apparently can evolve even when the parasites of the host are derived from as many as five different parents.     

The ability of conditioned Microplitis croceipes (Hymenoptera: Braconidae) to distinguish between odors of aflatoxigenic and non-aflatoxigenic fungal strains

Summary. The parasitic wasp Microplitis croceipes (Cresson) (Hymenoptera: Braconidae) learns to associate odors with food resources and subsequently exhibits a characteristic food-seeking behavior when encountering the learned odor. Wasps so conditioned, learned and subsequently demonstrated an ability to distinguish among aflatoxigenic and non-aflatoxigenic Aspergillus flavus and A. parasiticus strains. The effects of fungal species, strain, age (5, 10-12, 20, and 30 d) and growth media (potato dextrose agar, peanut agar and corn agar) on the learning and recognition responses of the conditioned wasps were examined. The level of differentiation between fungal strains by conditioned wasps was lowest when working with 5-d-old fungal cultures but increased with age and generally peaked with 20-d-old fungi. Wasps responded generally stronger to the fungal strain conditioned to independent of growth media. This ability of parasitic wasps to learn and distinguish fungal odors can open new avenues in insect learning.