Landfill leachate treatment using a rotating biological contactor and an upward-flow anaerobic sludge bed reactor

This paper describes the feasibility of an aerobic system (rotating biological contactor, RBC) and a biological anaerobic system (upward-flow anaerobic sludge bed reactor) at small scale for the treatment of a landfill leachate. In the first phase of the aerobic system study, a cyclic-batch RBC system was used to select perforated acetate discs among three different acetate disc configurations. These discs were chosen on the basis of high COD removal (65%) and biological stability. In the second phase, the RBC system (using four stages) was operated continuously at different hydraulic retention times (HRT), at different rotational speeds, and with varying organic concentrations of the influent leachate (2500-9000mgL(-1)). Forty percent of the total surface area of each perforated disc was submerged in the leachate. A COD removal of about 52% was obtained at an HRT of 24h and a rotational speed of 6rpm. For the anaerobic system, the reactor was evaluated with a volumetric organic load of 3273g-COD m(-3) day(-1) at an HRT of 54, 44, 39, 24 and 17h. At these conditions, the system reached COD removal efficiencies of 62%, 61%, 59%, 44% and 24%, respectively.     

Reusing fly ash in glass fibre reinforced cement: a new generation of high-quality GRC composites

New composite materials based on an alkali-resistant glass-fibre reinforced cement (AR-GRC) system are being developed by using fly ash (FA) produced at coal thermoelectric power plants, and fluid catalytic cracking catalyst residue (FC3R) from the petrol industry as cement replacement materials. These wastes are reactive from the pozzolanic viewpoint, and modify the nature and the microstructure of the cement matrix when a part of the Portland cement is replaced in the formulation of GRC. Several microstructural and mechanical aspects are being studied for AR-GRC systems. The behaviour of composites exposed to ageing shows that the pozzolanic activity of the ground FA added in high amounts and its mixture with the FC3R increase the flexural strength and no evidences of strength decay are observed. Additionally, the fibres due to the high alkalinity of the cementing matrix can be deteriorated. Fibres in the control (only Portland cement) and FC3R containing composites were attacked, whereas composites with FA and their mixture with FC3R show that the fibres have not been attacked, due to the pozzolanic activity of replacing materials that reduce the calcium hydroxide content in the cementing matrix.     

The impact of the 2004 tsunami on coastal Thai communities: assessing adaptive capacity

The suddenness and scale of the 26 December 2004 tsunami and the challenges posed to affected communities highlighted the benefits of their members having a capacity to confront and adapt to the consequences of such a disaster. Research into adaptive capacity or resilience has been conducted almost exclusively with Western populations. This paper describes an exploratory study of the potential of a measure of collective efficacy developed for Western populations to predict the capacity of members of a collective society, Thai citizens affected by the 2004 tsunami, to confront effectively the recovery demands associated with this disaster. Following a demonstration that this measure could predict adaptive capacity, the role of religious affiliation, ethnicity and place of residence in sustaining collective efficacy is discussed. The implications of the findings for future research on, and intervention to develop, adaptive capacity among Thai citizens in particular and collectivist societies in general are discussed.     

Experimental Study of the Criteria of Flow Laminarization in Two-Dimensional Dense Gas Plumes

Laminarization of flow in a two-dimensional dense gas plume was experimentally investigated in this study. The plume was created by releasing CO₂ through a ground-level line source into a simulated turbulent boundary layer over an aerodynamically rough surface in a meteorological wind tunnel. The bulk Richardson number (Ri_*), based on negative plume buoyancy, plume thickness, and friction velocity, was varied over a wide range so that the effects of stable stratification on plume laminarization could be observed. A variety of ambient wind speeds as well as three different sizes of roughness arrays were used so that possible effects of roughness Reynolds number (Re_*) on plume laminarization could also be identified. Both flow visualization methods and quantitative measurements of velocity and intermittency of turbulence were used to provide quantitative assessments of plume laminarization.Flow visualization provided an overall picture of how the plume was affected by the negative buoyancy. With increasing Ri_*, both the plume depth and the vertical mixing were significantly suppressed, while upstream propagation of the plume from the source was enhanced. The most important feature of the flow revealed by visualization was the laminarization of flow in the lower part of the plume, which appeared to be closely related to both Ri_* and Re_*.Measurements within the simulated dense gas plumes revealed the influence of the stable stratification on mean velocity and turbulence intensity profiles. Both the mean velocity and turbulence intensity were significantly reduced near the surface; and these reductions systematically depended on Ri_*. The roughness Reynolds number also had considerable influence on the mean flow and turbulence structure of the dense gas plumes.An intermittency analysis technique was developed and applied to the digitized instantaneous velocity signals. It not only confirmed the general flow picture within the dense plume indicated by the flow visualization, but also clearly demonstrated the changes of flow regime with variations in Ri_* and Re_*. Most importantly, based on this intermittency analysis, simple criteria for characterizing different flow regimes are formulated; these may be useful in predicting when plume laminarization might occur.     

Unprecedented bleaching-induced mortality in Porites spp. at Rangiroa Atoll, French Polynesia

In April-May 1998, mass coral bleaching was observed in the lagoon of Rangiroa Atoll, Tuamotu Archipelago, French Polynesia. Six months later, the extent of bleaching-induced coral mortality was assessed at three sites. Corals in the fast-growing genus Pocillopora had experienced >99% mortality. Many large colonies of the slow-growing genus Porites (mean horizontal cross-sectional area 5.8 m²) had also died - a phenomenon not previously observed in French Polynesia and virtually unprecedented world-wide. At one site, 25% of colonies, or 44% of the pre-bleaching cover of living Porites, experienced whole-colony mortality. At the two other sites, recently dead Porites accounted for 41% and 82% of the pre-bleaching live cover. Mortality in Porites was negatively correlated with depth between 1.5 and 5 m. Using a 50-year dataset of mean monthly sea surface temperature (SST), derived from ship- and satellite-borne instruments, we show that bleaching occurred during a period of exceptionally high summer SST. 1998 was the first year in which mean monthly SSTs exceeded the 1961-1990 upper 95% confidence limit (29.4°C) for a period of three consecutive months. We suggest that the sustained 3-month anomaly in local summer SST was a major cause of coral mortality, but do not discount the synergistic effect of solar radiation. Recovery of the size-frequency distribution of Porites colonies to pre-bleaching levels may take at least 100 years.     

Life on glass houses: sponge stalk communities in the deep sea

Photographs of the deep-sea floor often show organisms attached to biogenic structures that protrude from the soft bottom. In particular, the stalks of glass sponges (hexactinellids) provide hard substrata and act as habitat islands for deep-sea fauna. The primary objectives of this study were to determine the abundance of glass sponge “stalks” at an abyssal station in the NE Pacific, to identify the fauna associated with stalks, and to compare the distribution patterns of epifaunal taxa both horizontally and vertically. Densities of stalks and large epifauna were estimated from analysis of ∼9 km of photographic transects taken in 1994–1995 at station M (34°45′N; 123°00′W; 4,100 m depth) off California, USA. At least 87% of the stalks were the spicule columns of live or dead hexactinellids in the genus Hyalonema (Gray, 1832). Stalks appeared to be distributed randomly across the sea floor (density: 0.13 stalks m⁻²). A colonial zoanthid, Epizoanthus stellaris (Hertwig, 1888), inhabited 20% of the stalks and was the most commonly observed epifaunal organism, followed by other suspension feeders that generally were situated at the top of the structures. Thirty-five stalk communities were collected in tube cores in 1994–1995 using the submersible “Alvin”. A total of 139 taxa was associated with these hard-substratum habitats (another five species were observed only in photographs). Although taxon richness was high, the species diversity of these communities was relatively low due to the dominance in percentage abundance of a foraminiferan, Cibicides lobatulus (Walker and Jakob, 1798), and a serpulid polychaete, Bathyvermilia sp. (Zibrowius, 1973). The relationship between number of taxa and surface area of the stalks yielded a slope (z-value) typical of islands with a low rate of immigration. Three-dimensional complexity created by branching epifauna on the stalks provided more surface area and a variety of cryptic microhabitats. Vertical zonation on the stalks appeared to be controlled by biological interactions among species, with solitary fauna and certain functional groups of colonial organisms restricted by sheet-like colonial organisms that appeared to be dominant space competitors. Received: 13 April 2000 / Accepted: 9 November 2000     

Chromosomal and nuclear characteristics of deep-sea hydrothermal-vent organisms: correlates of increased growth rate

A range of tissue and cell types from adult and juvenile stages of vent- and non-vent-dwelling deep-sea and shallow-water organisms were compared for signs of cell division, in preparation for a cytogenetic study of the different groups. Virtually all the Mid-Atlantic Ridge (MAR) vent species (bresiliid shrimp, bathymodiolid mussel, branchipolynoid polychaete, and a range of small gastropods) showed an abundance of metaphase chromosome spreads, indicating a generally high intrinsic rate of cell division, irrespective of their phylogenetic group. In comparison, similar tissues and life-history stages (i.e. gonad, developing eggs and gill) from two deep-sea bathypelagic crustaceans, Hymenodora and Gnathophausia, failed to yield any convincing evidence of cell division. This indicated that rates of growth and reproduction in the rest of the deep sea are extremely low. While much has been written about the contrasting growth rates of vent versus non-vent organisms, this is the first direct evidence of differences in cell-division rate between vent and non-vent species, which undoubtedly reflects contrasting conditions relating to food availability and temporal stability in these two deep-sea environments. The cells of shallow-water marine invertebrates (Mytilus, Nucella, Littorina, Pomatoceros and Crangon), based on the results of previous cytogenetic investigations, occupy an intermediate position with respect to their cell-division kinetics. When chromosome numbers, DNA content and nuclear diameters were compared between vent and non-vent species, this showed that no change had occurred in these characters since the time of vent colonisation. Representative chromosome spreads from hydrothermal-vent organisms are shown here for the first time.     

Chromosomal evolution in Mugilidae: karyotype characterization of Liza saliens and comparative localization of major and minor ribosomal genes in the six Mediterranean mullets

This study continues a comparative cytogenetic analysis of the fish family Mugilidae, reporting the karyotype characterization of the leaping mullet, Liza saliens, by C-banding, Ag- and fluorochrome-staining, and completing the fluorescence in situ hybridization (FISH)-mapping of the 18S and 5S rRNA genes (rDNA) to the chromosomes of the six Mediterranean mullets, namely L. saliens, L. ramada, L. aurata, Mugil cephalus, Chelon labrosus and Oedalechilus labeo. In all species, except M. cephalus, the 5S rDNA sites were localized on a medium-sized acrocentric chromosome pair, which was considered homeologous in all of them. In L. saliens, an additional 5S rDNA site was detected in a location close to the one shown by major ribosomal genes in M. cephalus, i.e. the subtelomeric region of chromosome pair 1. The 5S rDNA site in M. cephalus is located on the smallest chromosome pair of the complement, which, on the other hand, though on a different position, bears 18S rDNA in all the species of Liza and Chelon examined. The heterochromatin composition and the major and minor ribosomal gene locations suggest that the karyotype of L. saliens (subgenus Protomugil) can be considered intermediate between the karyotype of the more primitive M. cephalus and those of the other Liza (subgenus Liza) species and of the representatives of the more derived genera Chelon and Oedalechilus.     

Phylogenetic relationships within the Octocorallia (Cnidaria: Anthozoa) based on nuclear 18S rRNA sequences

We determined the nuclear 18S rRNA sequences for 41 species of octocorals and used these to address the validity of the historical ordinal divisions and the current subordinal divisions within the subclass Octocorallia. We also explored the phylogenetic affinities of the species Dendrobrachia paucispina, which was originally classified in the order Antipatharia (subclass Ceriantipatharia) although polyp structure indicates it belongs in the subclass Octocorallia. Trees constructed using maximum likelihood techniques are incongruent with the current and historical taxonomy of the Octocorallia. There appeared to be three major clades of octocorals. The first clade included most, but not all, pennatulaceans as a monophyletic group. The second clade contained 21 species, representing all major octocoral groups other than pennatulaceans. The third clade contained members from three suborders of the Alcyonacea and one member of the Pennatulacea. These data could not be used to distinguish the branching order of the three major clades. The species D. paucispina had a close affinity with the genera Corallium and Paragorgia (Alcyonacea: Scleraxonia), although its morphology suggests it is more similar to the genus Chrysogorgia (Alcyonacea: Calcaxonia). The morphological character of dimorphism (the presence of both autozooids and siphonozooids within a single colony) corresponded loosely with the topology of the most likely trees, and a single origin of dimorphism could not be rejected. Despite sampling from the majority of families within the Octocorallia, many of the relationships within this group remain ambiguous. Received: 16 June 2000 / Accepted: 14 September 2000     

Predicting the Risk of Extinction through Hybridization

Abstract: Natural hybridization threatens a substantial number of plant and animal species with extinction, but extinction risk has been difficult to evaluate in the absence of a quantitative assessment of risk factors. We investigated a number of ecological parameters likely to affect extinction risk, through an individual-based model simulating the life cycle of two hybridizing annual plant species. All parameters tested, ranging from population size to variance in pollen-tube growth rates, affected extinction risk. The sensitivity of each parameter varied dramatically across parameter sets, but, overall, the competitive ability, initial frequency, and selfing rate of the native taxon had the strongest effect on extinction. In addition, prezygotic reproductive barriers had a stronger influence on extinction rates than did postzygotic barriers. A stable hybrid zone was possible only when habitat differentiation was included in the model. When there was no habitat differentiation, either one of the parental species or the hybrids eventually displaced the other two taxa. The simulations demonstrated that hybridization is perhaps the most rapidly acting genetic threat to endangered species, with extinction often taking place in less than five generations. The simulation model was also applied to naturally hybridizing species pairs for which considerable genetic and ecological information is available. The predictions from these "worked examples" are in close agreement with observed outcomes and further suggest that an endemic cordgrass species is threatened by hybridization. These simulations provide guidance concerning the kinds of data required to evaluate extinction risk and possible conservation strategies.