Characteristic occurrence patterns of micropollutants and their removal efficiencies in industrial wastewater treatment plants

The concentrations and removal efficiencies of various kinds of micropollutants were investigated and the relationships between the input sources of industrial wastewater and occurrence patterns of each micropollutant were identified at nine on-site industrial wastewater treatment plants (WWTPs). The distribution pattern of each compound varied according to the WWTP type and several micropollutants were significantly related with specific industries: chlorinated phenols (ClPhs) with paper and metal industries, polycyclic aromatic hydrocarbons (PAHs) with petrogenic- and pyrogenic-related industries, polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) with the paper industry, and chlorinated benzenes (ClBzs) with dye-related industries. The activated sludge (AS) process was very efficient in the removal of ClPhs and PAHs, and the filtration process in the removal of PCDD/Fs and 1,4-dioxane. Generally, the removal efficiencies of each micropollutant varied according to the WWTP type.     

Gasification applicability study of polyurethane solid refuse fuel fabricated from electric waste by measuring syngas and nitrogenous pollutant gases

To recycle polyurethane foam waste generated from electric appliance recycling centers for use as fuel in a gasification process, polyurethane solid refuse fuel fabricated as pellets was analyzed for the characteristics of elemental composition, proximate analysis, heating value, and thermo-gravimetric testing. It has a high heating value of 29.06 MJ/kg with a high content of combustibles, which could be feasibly used in any thermal process. However, the nitrogen content, of up to 7 %, was comparably higher than for other fuels such as coal, biomass, and refuse-derived fuel, and may result in the emission of nitrogenous pollutant gases of HCN and NH₃. By conducting gasification experiments on polyurethane solid refuse fuel in a fixed-bed reactor, a syngas with a heating value of 9.76 kJ/m³ and high content of both H₂ and CO were produced with good gasification efficiency; carbon conversion 54 %, and cold gas efficiency 60 %. The nitrogenous pollutant gases in syngas were measured at the concentrations of 160 ppm hydrogen cyanide and 40 ppm ammonia, which may have to be reduced using proper cleaning technologies prior to the commercialization of gasification technology for polyurethane waste.     

Innovative method of culturing bdelloid rotifers for the application of wastewater biological treatment

• An innovative method of culturing bdelloid rotifer fed on flour was proposed. • Rotifer fed on flour grew faster than that fed on bacteria or Chlorella vulgaris. • The optimum mass culture conditions for rotifer fed on flour were investigated. • The cultured rotifer could improve sludge settleability in the SBR. This study aims to establish a simple and efficient method for the mass culture of bdelloid rotifers, which is the basis for the application of bdelloid rotifers as biological manipulators to improve wastewater biological treatment performance. A common bdelloid rotifer, Habrotrocha sp., in a wastewater biological treatment system was selected as the culture target. Rotifers fed on flour could reproduce faster than those fed traditional food such as Chlorella vulgaris or mixed bacteria. As a rotifer food, flour has the advantages of simple preparation, effortless preservation, and low cost compared to live Chlorella vulgaris or mixed bacteria, so it is more suitable for the mass culture of rotifers. The optimal rotifer culture conditions using flour as food were also studied. According to the experimental results, the recommended rotifer culture conditions are a flour particle size of 1 μm, a flour concentration of 6 × 10⁶ cell/mL, a temperature of 28℃, a pH level of 6.5 and salinity of 100–500 mg/L. In addition, the sludge volume index in the sequencing batch reactor (SBR) with the addition of cultured rotifers was 59.9 mL/g at the end of operation and decreased by 18.2% compared to SBR without rotifer, which indicates that the cultured rotifers still retained the function of helping to improve sludge settling. This function may be related to the rotifer’s role in inhibiting bacteria from producing loosely bound extracellular polymeric substances in the SBR.     

Monitoring of non-point source pollutants load from a mixed forest land use

The aim of this study was to determine the unit load of NPS (non-point source) pollutants including organic variables such as BOD (biochemical oxygen demand),COD (chemical oxygen demand) and DOC (dissolved organic carbon),nitrogen and phosphorus constituents,and suspended solids (SS) and their event mean concentration (EMC) of runoff flows from a water-shed of mixed forest land use by intensive field experiments.Field monitoring for continuous measurements of rainfall,flow,and water quality was conducted over 12 storm events during 2008–2009 using automated and manual sampling methods.The EMCs of individual runoff event were estimated for each water quality constituent based on the flow rate and concentration data of runoff discharge.The average EMCs of BOD,COD,DOC,SS,TN (total nitrogen),NH 4+ -N,NO 3- -N,TP (total phosphorus),PO 43- -P from the mixed forest land were 1.794,3.498,1.462,10.269,0.862,0.044,0.634,0.034,and 0.005 mg/L,respectively.The annual unit loads of BOD,COD,DOC,SS,TN,NH 4+ -N,NO 3- -N,TP and PO 43--P were estimated as 66.9,133.2,55.5,429.8,36.5,1.6,26.9,1.3 and 0.1 kg/(ha·yr),respectively.In addition,affecting parameters on the EMCs were investigated by statistic analysis of the field data.As a result,significant correlations with precipitation,rainfall intensity,and total runoff flows were found in most constituents.     

Background monitoring and long-range transport of atmospheric CFC-11 and CFC-12 at Kosan, Korea

The background concentrations of atmospheric CFC-11 and CFC-12were monitored to assess their impact on stratospheric ozone depletion and global warming from September 1995 to March 1999 at Kosan, Korea, located at eastern margin of the Asian Continent. The concentrations of atmospheric CFC-11 at Kosan have decreased slightly, at a rate of –2.5 pptv yr^-1, over the period in response to the Montreal Protocol. The CFC-12 mixing ratio at Kosan continues to increase in the atmosphere at a rate of 5.7 pptv yr^-1 despite international regulations, because of its extreme atmosphere persistence. Recent trends ofthese two chlorofluorocarbons at Kosan, Korea were concordant with those of the northern hemispheric background monitored unitat Mauna Loa, Hawaii. The maximum seasonal mean mixing ratios of CFC-11 and CFC-12 at Kosan, Korea, were 270±4 pptv inthe spring and 538±9 pptv in the winter, and the corresponding seasonal minima were 267±7 and 529±12 pptv. This occurred in the summer and was due to southeasterlywinds from the northwestern Pacific Ocean. By performing a three-day isentropic backward trajectory analysis, it was shownthat air masses at Kosan, and with the exception of summer, mainly originated from central and northern China. In particular, the mixing ratios of these two contaminant speciesare closely related with their air mass trajectories.     

Accelerated sunlight photocatalysis through improved electron mobility between g-C3N4 and BiPO4 nanomaterial

Herein, we report a detailed study on creating heterojunction between graphitic carbon nitride (g-C₃N₄) and bismuth phosphate (BiPO₄), enhancing the unpaired free electron mobility. This leads to an accelerated photocatalysis of 2,4-dichlorophenols (2,4-DCPs) under sunlight irradiation. The heterojunction formation was efficaciously conducted via a modest thermal deposition technique. The function of g-C₃N₄ plays a significant role in generating free electrons under sunlight irradiation. Together, the generated electrons at the g-C₃N₄ conduction band (CB) are transferred and trapped by the BiPO₄ to form active superoxide anion radicals (?O₂^?). These active radicals will be accountable for the photodegradation of 2,4-DCPs. The synthesized composite characteristics were methodically examined through several chemical and physical studies. Due to the inimitable features of both g-C₃N₄ and BiPO₄, its heterojunction formation, 2.5wt% BiPO₄/g-C₃N₄ achieved complete 2,4-DCP removal (100%) in 90 min under sunlight irradiation. This is due to the presence of g-C₃N₄ that enhanced electron mobility through the formation of heterojunctions that lengthens the electron-hole pairs’ lifetime and maximizes the entire solar spectrum absorption to generate active electrons at the g-C₃N₄ conduction band. Thus, this formation significantly draws the attention for future environmental remediation, especially in enhancing the entire solar spectrum’s harvesting.

Graphical abstract

     

Mixtures modeling identifies heavy metals and pyrethroid insecticide metabolites associated with obesity

Environmental Science and Pollution Research - We aim to examine the association between chemical mixtures and obesity. Blood and urinary levels of tween-six chemicals were measured in adults who...