Characteristics of Asian dust transport based on synoptic meteorological analysis over Korea

Classification of synoptic patterns and their correlation with dust events over East Asia were performed by means of cluster analysis. The average linkage and K-means clustering techniques were used to identify two major weather types during Asian dust events (ADEs; total 26 ADEs with 47 dusty days) of six spring seasons from 1996 to 2001. The first weather type mainly influenced neighboring Asian countries and frequently occurred with ADEs (approximately 23% of ADE cases). It mostly occurred under a surface high (low)-pressure system over the west (east) of the Korean peninsula coupled with an upper-level trough and cutoff low passage over the center of the Korean peninsula. It showed strong advection in the middle/ upper troposphere with both a high aerosol index and enhanced coarse particulate matter (PM) loading over Korea. In contrast, the second weather type was mostly associated with long distance or continental-scale transport and occurred less frequently with ADEs (approximately 15%). It appeared with an upper-level trough and a cutoff low vertically connected with a surface low system that was formed by a strong cyclonic vortex over the north of the Korean peninsula. There were weak advection, low aerosol index, and low coarse PM concentration over the Korean peninsula during the second weather type. In addition, it was found to be mostly associated with the trans-Pacific transport of Asian dust to the western coast of North America.     

Development of intelligent sorting system realized with the aid of laser-induced breakdown spectroscopy and hybrid preprocessing algorithm-based radial basis function neural networks for recycling black plastic wastes

Plastic recycling has been the key issue for reducing environmental problems and resolving resource depletion. To improve the recovery rate of plastics, the plastic wastes are correctly identified according to their resin type. However, the identification system, which is able to identify black plastics according to not only the type of black plastics but also the grade of resins correctly, has not been introduced. In this paper, laser-induced breakdown spectroscopy, intelligent algorithms and preprocessing algorithms are used to improve the identification of black plastics such as polypropylene, polystyrene (PS), and acrylonitrile butadiene styrene (ABS). The laser-induced breakdown spectroscopy is capable of obtaining the characteristic spectrum regardless of material’s physical state. To extract the new features which are very valuable to improving learning performance, increasing computational efficiency, and building better generalization models from the obtained spectra through laser-induced breakdown spectroscopy, the hybrid preprocessing algorithm, composed of principal component analysis and independent component analysis, is used. In addition, the intelligent algorithm named the extended radial basis function neural networks inheriting the advantages of fuzzy theory and neural networks is used to identify black plastic samples into several categories with respect to their resins. The proposed identification system, composed of three parts such as laser induced breakdown spectroscopy, hybrid preprocessing algorithms, and an efficient intelligent classification algorithm, is able to show the synergy effect on the black plastic identification problem. From several experimental results, it can be seen that the identification system based on laser-induced breakdown spectroscopy and the intelligent algorithm is used for identification of black plastics by resin type.     

Comparative study of torrefaction of empty fruit bunches and palm kernel shell

Journal of Material Cycles and Waste Management - This paper describes the effect of torrefaction on the characteristics of empty fruit bunches (EFB) and palm kernel shell (PKS). The torrefaction...     

Sustainable Water Resources Management in a Conflict Resolution Framework1

Abstract: A decision support system for sustainable water resources management in a water conflict resolution framework is developed to identify and evaluate a range of acceptable alternatives for the Geum River Basin in Korea and to facilitate strategies that will result in sustainable water resource management. Working with stakeholders in a “shared vision modeling” framework, sustainable management strategies are created to illustrate system tradeoffs as well as long‐term system planning. A multi‐criterion decision‐making (MCDM) approach using subjective scales is utilized to evaluate the complex water resource allocation and management tradeoffs between stakeholders and system objectives. The procedures used in this study include the development of a “shared vision model,” a simulated decision‐making support system (as a tool for sustainable water management strategies associated with water conflicts, management options, and planning criteria), and the application of MCDM techniques for evaluating alternatives provided by the model. The research results demonstrate the utility of the sustainable water resource management model in aid of MCDM techniques in facilitating flexibility during initial stages of alternative identification and evaluation in a basin suffering from severe water conflicts.     

A feasibility study of thermal hydrolysis by-products as barrier layer materials in the final cover system for a landfill

Most sludge has historically been disposed of in landfills and by ocean dumping but, because of its heavy metal content, this will be totally banned in Korea starting in 2012, based on the London Dumping Convention. Therefore, treatment and disposal methods that are environmentally friendlily are urgently required. The recycling of sewage sludge is a good treatment method for solving sludge problems in an environmentally friendly way. In this study, physical and environmental tests were conducted to evaluate the feasibility of using the by-products of thermal hydrolysis of sewage sludge as barrier layer materials in the final cover systems for landfills. In addition, testing methods for freezing-thawing (KS F 2332) and wetting-drying (KS F 2330) cycles were conducted to assess the effects of cold and hot soil climates starting from pavement. These tests yielded positive results for alternative materials for the barrier layer in a final cover system for a landfill.     

Analysis and evaluation of chlorinated persistent organic compounds and PAHs in sludge in Korea

The concentrations of 12 POPs listed in the Stockholm convention, chlorophenols (CPs) and PAHs were investigated in sludge samples from wastewater and sewage treatment plants (WWTPs and STPs). The concentrations of PCDD/Fs in the wastewater sludge ranged from 0.189 to 1092 ng-TEQkg(-1) dry wt., and most of the sludge samples had levels below the EU guideline for the land application of PCDD/Fs (<100 ng-TEQkg(-1) dry wt.) except one sample. Co-PCB congeners were analyzed from four WWTPs, with total concentrations ranging from 0.265 to 26.6 ng-TEQkg(-1) dry wt., which were similar to the results obtained from previous studies. The levels of PCDD/Fs and Co-PCBs varied according to the main source of the influent to each WWTP and the paper industry was the main source of these compounds in the sludge due to the chlorine bleaching process. In case of OCPs, HCB and p,p'-DDE were detected at relatively high levels in the sludge samples compared to other target compounds, ranging from 1.30 to 21.5 microg kg(-1) dry wt. and 0.758 to 14.8 microg kg(-1) dry wt., respectively. Different OCP distribution patterns were observed according to sludge types, with HCB and DDTs being dominant in the sludge from WWTPs and STPs, respectively. The total levels of PAHs and CPs ranged from 1.24 to 44.9 mg kg(-1) dry wt. and 0.340 to 3.85 mg kg(-1) dry wt., respectively. The PAHs and CPs were also shown to have various distribution patterns, possibly due to the different wastewater sources to the WWTPs.     

Feasibility of phosphate fertilizer to immobilize cadmium in a field

To reduce effectively cadmium (Cd) phytoextractability by phosphate fertilizer in Cd contaminated soil, fused and superphosphate (FSP) was applied at the rate of 0, 33.5 (recommendation level), 167.5, and 335 kg P ha⁻¹ for radish (Raphanus sativa L.). Unlike from what we expected, soil Cd extractability and Cd concentration in radish increased with increasing FSP application in the field. To determine the effect of FSP on Cd immobilization, FSP was mixed with the selected soil at the rate of 0, 200, 400, 800, and 1600 mg P kg⁻¹ and then incubated for 8 weeks. As observed in the field study, NH₄OAc extractable Cd concentration increased slightly with FSP addition up to 400 mg P kg⁻¹ and thereafter dramatically decreased upon increasing its application rate. Soil pH and negative charge were decreased at low level of FSP application up to 400 mg P kg⁻¹, but thereafter continually increased with increasing application level. This could be indirect evidence that net soil negative charge was increased by the specific adsorption of phosphate at the high rate of FSP application over 400 mg P kg⁻¹. The labile Cd fraction (water soluble and exchangeable + acidic fraction) increased with increasing FSP application by 400 mg P kg⁻¹ and thereafter gradually decreased with corresponding increase in unlabile fraction (oxidizable and residual fraction). Based on these results, FSP might be applied with a very high rate over 800 mg P kg⁻¹ to decrease Cd extractability in the selected field. However, this level is equivalent to 1440 kg P ha⁻¹, which is about 43 times higher than the recommendation levels for radish production and resulted in a significant increase in water soluble P concentration creating a new environmental problem. Therefore, the feasibility of FSP to reduce Cd extractability in the field is very low.     

Hydroxyl radical generation and oxidative stress in Carassius auratus liver as affected by 2,4,6-trichlorophenol

With Carassius auratus, one of the main economic fish species in Eastern China as test material, this paper studied the hydroxyl radical generation and oxidative stress in its liver under the effect of 2,4,6-trichlorophenol (2,4,6-TCP). Different doses of 2,4,6-TCP were injected intraperitoneally into the fishes, and the Electron paramagnetic resonance (EPR) spectra of hepatic free radicals, activities of superoxide dismutase (SOD), catalase (CAT) and glutathione-s-transferase (GST), levels of reduced glutathione (GSH) and oxidized glutathione (GSSG), and malondialdehyde (MDA) contents were determined 24h after injection. The results showed that under the effects of 2,4,6-TCP, the generation of free radical that was considered to be hydroxyl radical increased significantly, the activities of antioxidant enzymes decreased, with CAT most strongly affected and followed by SOD and GST, the GSH level decreased significantly while GSSG level had little difference, resulting in a decreased GSH/GSSG ratio, and the MDA content increased significantly. All the test parameters showed that C. auratus was subjected to oxidative stress and damage when exposed to 2,4,6-TCP.     

Organically modified low-grade kaolin as a secondary containment material for underground storage tanks

Batch scale reactions were conducted to evaluate the efficacy of modified low-grade kaolin for the treatment of petroleum contaminants. Low-grade kaolin, which has been unvalued as material in the mining process because of its low quality for commercial products, was modified with HDTMA (hexadecyl-trimethylammonium), and its efficiency was compared with that of HDTMA-modified bentonite, which is used as a secondary containment barrier for underground storage tanks. The sorption capacity and hydraulic conductivity of both the HDTMA-modified bentonite and low-grade kaolin were investigated and showed distribution coefficients in the sorption of benzene, toluene, ethylbenzene and xylene ranging between 45.7 and 583.7 and 57.0 and 525.1, respectively. The hydraulic conductivities were 2.53 × 10⁻⁸ and 5.62 × 10⁻⁸ cm/s for the HDTMA-modified bentonite and low-grade kaolin, respectively. These results suggest that HDTMA-modified low-grade kaolin could be used as a hydraulic barrier against advection migration of petroleum contaminants. Simulation of the one-dimensional transport of benzene through a liner made of either one of the compounds was also performed. These results also showed that HDTMA-modified kaolin more effectively retards the transport of benzene.     

Application of eggshell waste for the immobilization of cadmium and lead in a contaminated soil

Liming materials have been used to immobilize heavy metals in contaminated soils. However, no studies have evaluated the use of eggshell waste as a source of calcium carbonate (CaCO₃) to immobilize both cadmium (Cd) and lead (Pb) in soils. This study was conducted to evaluate the effectiveness of eggshell waste on the immobilization of Cd and Pb and to determine the metal availability following various single extraction techniques. Incubation experiments were conducted by mixing 0–5% powdered eggshell waste and curing the soil (1,246 mg Pb kg^?1 soil and 17 mg Cd kg^?1 soil) for 30 days. Five extractants, 0.01 M calcium chloride (CaCl₂), 1 M CaCl₂, 0.1 M hydrochloric acid (HCl), 0.43 M acetic acid (CH₃COOH), and 0.05 M ethylendiaminetetraacetic acid (EDTA), were used to determine the extractability of Cd and Pb following treatments with CaCO₃ and eggshell waste. Generally, the extractability of Cd and Pb in the soils decreased in response to treatments with CaCO₃ and eggshell waste, regardless of extractant. Using CaCl₂ extraction, the lowest Cd concentration was achieved upon both CaCO₃ and eggshell waste treatments, while the lowest Pb concentration was observed using HCl extraction. The highest amount of immobilized Cd and Pb was extracted by CH₃COOH or EDTA in soils treated with CaCO₃ and eggshell waste, indicating that remobilization of Cd and Pb may occur under acidic conditions. Based on the findings obtained, eggshell waste can be used as an alternative to CaCO₃ for the immobilization of heavy metals in soils.