Polycyclic aromatic compounds in Northwest Atlantic COD (Gadus morhua)

Twenty-seven polycyclic aromatic compounds (PAC) including polycyclic aromatic hydrocarbons (PAH) and polycyclic aromatic sulphur heterocycles were analysed in muscle, liver and ovaries of cod (Gadus morhua) from the Northwest Atlantic. These PAC include the 16 PAH priority pollutants (EPA recommendation), alkylated naphthalenes, phenanthrene-anthracenes as well as dibenzothiophenes (DBT). Aromatics were undetectable in muscle. One of the analysed PAC was detected in one ovary and six in another ovary sample. Liver samples contained between 1 and 9 PAC. Of the parental PAH, only acenapthene (18 ng/g, dry weight), fluorene (28 ng/g) and chrysene (22 ng/g) were detected once each in two liver samples, while fluorene (72 ng/g) was detected once in one of the ovaries. C-2 DBT was the major component in ovaries and liver (8-86 ng/g), while C-3 and C-4 alkylated phenanthrene-anthracene (12-78 ng/g) were the next major components detected in the liver samples. This is the first detailed study of PAH and PAC in finfish from the Northwest Atlantic.     

Advanced oxidation processes for the treatment of olive-oil mills wastewater

In this work, the treatment of an actual industrial waste with three advanced oxidation processes (AOP) has been studied: conductive-diamond electrooxidation (CDEO), ozonation and Fenton oxidation. The wastewater comes from olive-oil mills (OMW) and contains a COD of nearly 3000 mg dm(-3). CDEO allowed achieving the complete mineralization of the waste with high current efficiencies. Likewise, both ozonation and Fenton oxidation were able to treat the wastes, but they obtained very different results in terms of efficiency and mineralization. The accumulation of oxidation-refractory compounds as final products excludes the use of ozonation and Fenton oxidation as a sole treatment technology. This confirms that besides the hydroxyl-radical mediated oxidation, CDEO combines other important oxidation processes such as the direct electro-oxidation on the diamond surface and the oxidation mediated by other electrochemically formed compounds generated on this electrode.     

Bioaccumulation of anthropogenic contaminants by detritivorous fish in the Río de la Plata estuary: 2-Polychlorinated biphenyls

The temporal variability and bioaccumulation dynamics of individual PCBs were studied in a detritivorous fish (Sábalo: Prochilodus lineatus) collected from 1999 to 2005 in the polluted Buenos Aires coastal area. Fish muscles contain high concentrations of total PCBs (11+/-7.2, 4.6+/-3.4 or 19+/-13 microg g(-1), dry, fresh and lipid weight, respectively) reflecting chronic bioaccumulation from sewage-industrial particulates. On a temporal basis, lipid normalized PCBs concentrations peaked by the end of 2001-2002 coincident with the rainiest period over the last four decades and shortly after PCB prohibition in the country, reflecting massive discharges to the coastal ecosystem. PCB composition in fish muscles show a prevailing contribution of hexachlorobiphenyls (35+/-4.2%), followed by hepta (23+/-3.0%), penta (20+/-3.6%), tri-tetra (16+/-4.8%) and minor proportions of octa-decachlorobiphenyls (5.7+/-3.1%) similar to an Aroclor 1242-1254-1260 1:2:4 mixture. During 2001-2002 maxima fish showed an enrichment in tri-tetrachlorobiphenyls ( approximately 1242-1254-1260 1:1:1 mixture) denoting a fresher signature. Fish/settling material lipid-organic carbon accumulation factors (BSAFs: 2.4-46, average: 21+/-10) plotted against kow showed a parabolic trend (BSAFs=-0.38 log kow2 + 5.16 log kow -15.85; R2=0.46) maximizing at hexa, hepta and octachlorobiphenyl 203 with reduced bioaccumulation of a few hepta (170, 191) and most octa-decachlorobihenyls suggesting limited intestinal absorption.     

Comparing computing formulas for estimating concentration ratios

The purpose of this paper is to provide guidance on the choice of computing formulas (estimators) for estimating average concentration ratios and other ratio-type measures of radionuclides and other environmental contaminant transfers between ecosystem components. Mathematical expressions for the expected value of three commonly used estimators (arithmetic mean of ratios, geometric mean of ratios, and the ratio of means) are obtained when the multivariate lognormal distribution is assumed. These expressions are used to explain why these estimators will not in general give the same estimate of the average concentration ratio. They illustrate that the magnitude of the discrepancies depends on the magnitude of measurement biases, and on the variance and correlations associated with spatial heterogeneity and measurement errors. This paper also reports on a computer simulation study that compares the accuracy of eight computing formulas for estimating a ratio relationship that is constant over time and/or space. Statistical models appropriate for both controlled spiking experiments and observational field studies for either normal or lognormal distributions are considered. Our results indicate that for either type of study the geometric mean is generally preferred if the lognormal distribution applies. However, the geometric mean has the disadvantage that its expected value depends on n, the number of measurements taken. Ricker's estimator, $\text{R}\text{?}{}_{\mathrm{rt}}$, appears to perform worse than the other estimators studied when the observations are lognormal. All eight estimators appear to be equally accurate for the controlled spiking study when data are normally distributed. For observational field studies when data are normally distributed the ratio of means or slight modifications thereof are preferred to other estimators investigated. Before one chooses a computing formula for estimating a concentration ratio, thought should be given to what target value needs to be estimated to satisfy study objectives, and to whether the normal or lognormal distribution is a more realistic model. The geometric mean performs well for lognormal distributions, but comparison of geometric means or of a geometric mean with environmental limits can be misleading if n is small. The arithmetic mean of ratios is a conservative choice in that it will always give a larger estimate than will the geometric mean. It may also be severely biased when data are lognormal and the variances of measurement errors are large. The ratio of the means is a reasonable choice if the distribution is normal. The median of the observed ratios, $\text{R}\text{?}{}_{\mathrm{<mtext>md</mtext>}}$, is useful estimate since it is easily obtained and has an easily understood interpretation as the point above which and below which 50% of the observed ratios lie. Also, it is appropriate no matter what the distribution of the observed ratios may be. Confidence limits on the median are also easily obtained. Finally, while this paper emphasizes applications in radionuclide research, our results should be applicable to a wide range of environmental contaminants since many contaminants have approximately lognormal distributions.     

High velocity fabric filtration for control of coal-fired boilers

As a follow-up to a pilot study, a full scale investigation of applying high velocity fabric filtration to coal-fired boiler fly ash control was conducted. Two filter systems were separately applied to two 60,000 lb/h coal-fired boilers. Performance evaluations conducted over the course of a year included total mass removal efficiency and fractional efficiencies. One filtration system employed Teflon felt as the filter media while the second system employed Gore-Tex, a Polytetrofluorethylene (PTFE) laminate on PTFE woven backing. During the course of the year, a limited number of glass felt and woven glass bags were introduced into the house containing Gore-Tex. As a separate option, the second system was outfitted entirely with woven glass bags. Preliminary results indicate acceptable performance at air-to-cloth ratio of 6 to 1. Future plans call for utilizing one of the baghouse systems for SO₂ removal.     

Mutagenic and carcinogenic potency of extracts from diesel related environmental emissions: Simultaneous morphological transformation and mutagenesis in BALB/c 3t3 cells

Particulate extracts from six different environmental emission sources were assayed for genotoxic activity in mouse BALB/c 3T3 clone A31-1 cells. All compounds were tested simultaneously for both transforming and mutagenic (induction of ouabain-resistance) potential with and without exogenous metabolic activation in the form of a 9000 × g postmitochondrial hepatic supernatant fraction from Aroclor-1254 induced Fischer 344 rats. Dichloromethane particulate extracts from the exhaust of two light duty diesel engines (Oldsmobile and Nissan), one heavy duty diesel engine (Caterpillar) and one late model gasoline engine (Mustang II) were assayed in an identical manner to particulate extracts from the emissions of a roofing tar pot and a coke oven. No clear dose-dependent responses were observed, but several of the samples showed significant transforming and mutagenic activity. A qualitative ranking system showed the activity of these particulate extracts for either mutagenesis or transformation was: coke oven = Mustang II gasoline engine > Nissan diesel engine > roofing tar. Particulate extracts from the Oldsmobile diesel engine and the Caterpillar diesel engine showed essentially no activity.     

A model for positive environmental control

In the control of pollution, two apparently important facts are often negelected: (1) removal of a particular pollutant from a particular source and location may merely result in transforming it into a pollutant, or pollutants of different forms, in other locations; (2) the activity of pollution control itself requires inputs, the production of which may generate additional pollutants. In order to achieve positive environmental control, these two facts must be considered in selecting control processes and in determining optimum control standards. It is necessary that an integrated approach to pollution control be taken, making allowances for ecological inter-relations. As practiced today, pollution control is handled as separate problems of disposing gas, liquid and solid wastes. This paper proposes a model for evaluating the total environmental impact of a pollution control process or method. Theoretical criteria for determining an optimum control level with or without resource constraint are also derived.     

Traceability in low-level radioactivity measurements

Various suggested definitions of the term “traceability” are discussed from the standpoint of proposed adoption and use of the concept by the International Organization of Legal Metrology.     

Development of quantitative estimates of uncertainty in environmental risk assessments when the scientific data base is inadequate

The reasons for developing quantitative estimates of uncertainty in environmental risk assessments are discussed along with a method for developing them which involves scientific judgement. In the situation considered here the regulatory needs are ahead of the science, which makes the development of the estimates on uncertainty more difficult, but not impossible. Quantitative estimates for all uncertainties involved in the estimation of risk resulting from exposure to volatile organic compounds (VOCs) in drinking water are developed and tabulated. By far the largest contribution to the uncertainty in the risk estimates for VOCs in drinking water are due to uncertainty in the extrapolation of the dose-response curve to low levels. The uncertainty due to extrapolation is on the order of 10⁴ and 10⁶. Other components of the analysis may contribute uncertainties of a few orders of magnitude. In general the largest uncertainties are in the toxicological data base and the manipulation of it needed to estimate risk. The data base and manipulations needed to estimate exposure due to VOCs in drinking water were at the more an order to magnitudes in uncertainty.