Environmental Technology Verification (ETV) test of dioxin emission monitors

The performance of four dioxin emission monitors, including two long-term sampling devices, the Dioxin-MonitoringSystem (DMS) and AMESA (the adsorption method for sampling dioxins and furans), and two semireal-time continuous monitors, the resonance ionization with multimirror photon accumulation time-of-flight mass spectrometer (RIMMPA-TOFMS) and the jet resonance-enhanced multiphoton ionization (jet-REMPI) system were tested. A package boiler burning a simulated chlorinated hazardous waste was used for a total of nine tests. Reference samples were collected during each test and analyzed for polychlorinated dibenzodioxins and dibenzofurans (PCDDs/Fs) using gas chromatography mass spectrometry. The PCDD/F concentrations of the reference samples measured by EPA Method 23 ranged from 0.9 to 6.0 ng toxic equivalence (TEQ)/dry standard cubic meter. The relative accuracies achieved by DMS, AMESA, and jet-REMPI varied from 22.6% to 78.2%, with 100% data completeness. The RIMMPA-TOFMS produced no quantifiable results due to various difficulties associated with the instrument during the testing. The two long-term samplers were easy to install and operate and provided a cumulative, averaged emission for the sampling period. The operations of the two semi-real-time continuous monitors were relatively complex, but one of them provided on-site, real-time data for PCDD/F emissions from measurement of a TEQ correlative indicator compound. This article summarizes results from the individual Environmental Technology Verification reports for the four dioxin monitors. This work was presented, in part, at the Fourth International Conference on Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC)     

Lead,zinc and copper accumulation and tolerance in populations of Paspalum distichum and Cynodon dactylon

Both Fankou and Lechang lead/zinc (Pb/Zn) mine tailings located at Guangdong Province contained high levels of total and DTPA-extractable Pb, Zn and Cu. Paspalum distichum and Cynodon dactylon were dominant species colonized naturally on the tailings. Lead, zinc and copper accumulation and tolerance of different populations of the two grasses growing on the tailings were investigated. Tillers of these populations including those from an uncontaminated area were subjected to the following concentrations: 5, 10, 20, 30 and 40 mg l(-1) Pb, 2.5, 5, 10, 20 and 30 mg (l-1) Zn, or 0.25, 0.50, 1 and 2 mg l(-1) Cu for 14 days, respectively, then tolerance index (TI) and EC50 (the concentrations of metals in solutions which reduce 50% of normal root growth) were calculated. The results indicated that both Lechang and Fankou populations of the two grasses showed a greater tolerance to the three metals than those growing on the uncontaminated area, which suggested that co-tolerant ecotypes have evolved in the two grasses. P. distichum collected from Fankou tailings had the highest tolerance to Cu while Lechang population the highest tolerance to Pb and Zn among the tested populations, and tolerance levels in P. distichum were related to metal concentrations in the plants. P. distichum had a better growth performance than C. dactylon when both of them were grown on the tailings sites. Tolerant populations of these species would serve as potential candidates for re-vegetation of wastelands contaminated with Pb, Zn and Cu.     

Response to perceived predation threat in fiddler crabs: trust thy neighbor as thyself?

Prey require information if they are to respond to predation threat in a risk-sensitive manner. One way that individuals can obtain this information is through the predator-mediated, threat-induced behavior of conspecifics. We examined such a possibility in a refuge-seeking species, the sand fiddler crab (Uca pugilator). Crabs were either exposed directly to a simulated predation threat (a moving cylinder) or the threat-induced response of a near neighbor. We found that fiddler crabs responded to the flight of their neighbors even when they, themselves, were not privy to the stimulus that induced their neighbors response. However, the wider range of behaviors exhibited by these crabs—which included no reaction, freezing, running back to the burrow entrance, and burrow retreat—suggest that non-threatened crabs either (1) perceived the gravity of the predation threat differently from their directly threatened neighbors and/or (2) engaged in behaviors that allowed them to acquire further information in the face of uncertainty. Conspecific behaviors also had an effect on the hiding duration of crabs, with individuals hiding longer if they saw both the predation threat and the flight of their neighbor. Our results suggest that cues provided by conspecifics can play an important role in guiding the antipredator response of refuge-seeking prey.     

Reclamation of wastes contaminated by copper,lead, and zinc

Waste materials containing toxic levels of copper, lead, and zinc, such as mine and smelter wastes, present difficult conditions for the establishment of vegetation. This article reviews the many attempts which have been made to reclaim these wastes. Inert wastes from mining and quarrying operations, such as slate quarry waste and certain colliery shales, seem to be good materials for reclaiming wastes contaminated by copper, lead, and zinc. Organic wastes, such as sewage sludge and domestic refuse, may provide only a temporary visual improvement and stabilization of the toxic materials.Nontolerant plant materials may often be planted directly on modern waste materials, which are less toxic than they were in the past. However, tolerant plant materials are needed for revegetating waste materials produced by early and more primitive extraction methods.     

Sludge-grown algae for culturing aquatic organisms: Part II. Sludge-grown algae as feeds for aquatic organisms

This project investigated the feasibility of using sewage sludge to culture microalgae (Chlorella-HKBU) and their subsequent usage as feeds for rearing different organisms. Part II of the project evaluated the results of applying the sludge-grown algae to feedOreochromis mossambicus (fish),Macrobrachium hainenese (shrimp), andMoina macrocopa (cladocera). In general, the yields of the cultivated organisms were unsatisfactory when they were fed the sludge-grown algae directly. The body weights ofO. mossambicus andM. macrocopa dropped 21% and 37%, respectively, although there was a slight increase (4.4%) inM. hainenese. However, when feeding the algal-fed cladocerans to fish and shrimp, the body weights of the fish and shrimp were increased 7% and 11% accordingly. Protein contents of the cultivated organisms were comparable to the control diet, although they contained a rather high amount of heavy metals. When comparing absolute heavy metal contents in the cultivated organisms, the following order was observed: alga > cladocera > shrimp, fish > sludge extracts. Bioelimination of heavy metals may account for the decreasing heavy metal concentrations in higher trophic organisms.     

HUMAN BEHAVIOR AND RESPONSE TOWARDS STORM HAZARD IN WEST VANCOUVER,BRITISH COLUMBIA1

ABSTRACT: Human behavior and response towards storm hazard are examined in this study. One-hundred and twenty flood victims in West Vancouver, British Columbia, were administered a sentence completion test to ascertain how these victims behaved and responded to the flash flood of July 12, 1972. The sentence completion test consisted of 11 sentence stems. Seven of these dealt with the respondent's behavior toward the storm experience, and four with the issue of internal vs. external locus of control. Completions of the seven sentence stems at three time situations showed that West Vancouverites expressed the normal reactions of fear and anxiety before the storm; showed negative emotions during the storm; and displayed a feeling of mutual cooperation after the storm. Completions of the remaining four sentence stems revealed that West Vancouverites emphasized the importance of internal factors, viz., autonomy, drive and hard work, in controlling their lives. They recognized God as a benevolent - protective and almighty - powerful figure. Forty percent of the respondents did not believe in luck, while 8 percent regarded it as important in their lives. One might conclude that West Vancouverites could cope with natural hazardous threats better than those who rely on external factors in directing their lives.     

Optimization of micro-aeration intensity in acidogenic reactor of a two-phase anaerobic digester treating food waste

Micro-aeration is known to promote the activities of hydrolytic exo-enzymes and used as a strategy to improve the hydrolysis of particulate substrate. The effect of different micro-aeration rates, 0, 129, 258, and 387 L-air/kg TS/d (denoted as LBR-AN, LBR-6h, LBR-3h and LBR-2h, respectively) on the solubilization of food waste was evaluated at 35 °C in four leach bed reactors (LBR) coupled with methanogenic upflow anaerobic sludge blanket (UASB) reactor. Results indicate that the intensity of micro-aeration influenced the hydrolysis and methane yield. Adequate micro-aeration intensity in LBR-3h and LBR-2h significantly enhanced the carbohydrate and protein hydrolysis by 21–27% and 38–64% respectively. Due to the accelerated acidogenesis, more than 3-fold of acetic acid and butyric acid were produced in LBR-3h as compared to the anaerobic treatment LBR-AN resulting in the maximum methane yield of 0.27 L CH₄/g VS_added in the UASB. The performance of LBR-6h with inadequate aeration was similar to that of LBR-AN with a comparable hydrolysis degree. Nevertheless, higher aeration intensity in LBR-2h was also unfavorable for methane yield due to significant biomass generation and CO₂ respiration of up to 18.5% and 32.8% of the total soluble hydrolysate, respectively. To conclude, appropriate micro-aeration rate can promote the hydrolysis of solid organic waste and methane yield without undesirable carbon loss and an aeration intensity of 258 L-air/kg TS/d is recommended for acidogenic LBR treating food waste.     

全国环境区划技术方法探讨

本文对全国环境区划的原则、指标、分区方法,等级单位划分等问题进行了探讨     

Microwave-Assisted Solvent Extraction of Air Particulates for the Determination of PAHs

A method for the determination of polycyclic aromatic hydrocarbons (PAHs) in air particulates using microwave-assisted solvent extraction (MASE) coupled to a microwave extraction system (MES) is proposed. During the period of August to October, 1994, Singapore was enveloped by haze caused by forest fires in Sumatra, Indonesia. Air sampling were carried out during September and October; the determination of ambient air PAH levels in Singapore was undertaken. PAH analysis by GC-MS provided excellent sensitivity, linearity of quantitation, peak identification. This technique was evaluated using certified reference materials (CRMs) HS-4 and HS-6. Good recoveries of PAHs (>73.3%) were obtained for both CRMs. The MASE technique using MES is suitable for the determination of PAH levels in ambient air with no clean-up step required.     

Influence of flue-gas desulfurization systems on coal combustion by-product quality at kentucky power stations burning high-sulfur coal

Two Kentucky power plants burning similar blends of high-sulfur western Kentucky and southern Indiana coal provide a unique opportunity to examine the variations in coal combustion by-products due to differences in the method of wet flue-gas desulfurization (FGD). One plant employed carbide lime-based scrubbing for two units and a dual-alkali process for the third unit. The second plant employed a Mississippian limestone from Kentucky for all four units. This study provides an example of optical and SEM petrographic techniques, supplemented by chemical analyses, applied to the study of, at least from the geologic perspective, non-traditional materials. The coal sources comprise a blend of high volatile C and B bituminous, high vitrinite (85–90%, mmf), high-sulfur (> 3%, dry) coals. The fly ash is dominated by glassy phases (70–80%) with about 5–10% spinel (predominately magnetite), 3–10% quartz, and 4–10% isotropic coke comprising the remaining portion of the ash. SEM observations indicate that the glassy particles exhibit a bimodal size distribution with sub-micron glass spheres and a population of larger (several 10s of microns) spheres. The bottom ash has higher proportions of spinels and mullite, with negligible carbon forms, compared to the fly ash from the same units. Fly ashes were observed to be lower in Fe and higher in Al, Si, and S compared to the bottom ashes. Carbide lime, a by-product of acetylene manufacture, soda ash, and limestone were the reagents used in the flue-gas desulfurization processes. The primary FGD by-product is a calcium sulfite slurry which is vacuum filtered and mixed with fly ash and, usually, lime, to form a stable product for disposal. The FGD by-products have some potential, as yet unrealized, for utilization.