Flow regime transition mechanisms in rapidly filling stormwater storage tunnels

An issue in the design of combined sewer overflow storage tunnels is to avoid “geysering” which is an air/water mixture blowing up through vertical shafts connected to the tunnel. Studies indicate that the origin of this phenomenon is the entrapment of large air pockets as the rapidly filling tunnel undergoes a transition between free surface and pressurized flow. Commonly implemented numerical models are of the shock fitting type that tracks the location of a pipe filling bore. However, the flow regime transition does not have to occur through a pipe filling bore. Another possibility involves a free surface bore with a following gradual transition to a full pipe condition. Large air volumes may be trapped in this situation following the bore reflection off a tunnel transition if this reflection closes the flow cross-section. Experimental observations are presented to demonstrate both types of flow regime transition. Traditional shock fitting methods are ill-equipped to accurately simulate gradual flow regime transitions. The shock capturing method proposed by Vasconcelos et al. (J Hydraul Eng 132(6):553–562, 2006) is demonstrated to be capable of resolving both types of observed bores.     

Herbivores and edaphic factors constrain the realized niche of a native plant

Biotic interactions, such as competition and herbivory, can limit plant species ranges to a subset of edaphically suitable habitats, termed the realized niche. Here we explored the role that herbivores play in restricting the niche of serpentine ecotypes of the native California annual Collinsia sparsiflora. We planted seeds from four populations into a range of natural field environments that varied in the presence/absence of naturally occurring C. sparsiflora and in predicted suitability for growth and survival of the serpentine ecotype of C. sparsiflora. Path analysis was then used to model the direct and herbivore-mediated indirect effects of environmental variables on the survival of C. sparsiflora serpentine ecotypes. We found that C. sparsiflora received more herbivory when planted into areas where serpentine ecotypes of C. sparsiflora were not predicted to persist, and that increased herbivory was associated with decreased survival, suggesting that herbivores may limit the distribution of C. sparsiflora serpentine ecotypes. Additionally, we demonstrated that edaphic environmental variables impacted the survival of C. sparsiflora serpentine ecotypes both directly and indirectly, by altering interactions with herbivores. These indirect effects were probably trait-mediated and probably occurred because edaphic factors may influence plant traits that, in turn, alter attractiveness to herbivores. Although the magnitude of direct effects exceeded the magnitude of indirect effects, many strong herbivore-mediated indirect effects were detected. Thus, interactions between the abiotic environment and insect herbivory contributed to restricting the niche of C. sparsiflora serpentine ecotypes to a subset of available habitat.     

Predicting leaf physiology from simple plant and climate attributes: a global GLOPNET analysis.

Knowledge of leaf chemistry, physiology, and life span is essential for global vegetation modeling, but such data are scarce or lacking for some regions, especially in developing countries. Here we use data from 2021 species at 175 sites around the world from the GLOPNET compilation to show that key physiological traits that are difficult to measure (such as photosynthetic capacity) can be predicted from simple qualitative plant characteristics, climate information, easily measured ("soft") leaf traits, or all of these in combination. The qualitative plant functional type (PFT) attributes examined are phylogeny (angiosperm or gymnosperm), growth form (grass, herb, shrub, or tree), and leaf phenology (deciduous vs. evergreen). These three PFT attributes explain between one-third and two-thirds of the variation in each of five quantitative leaf ecophysiological traits: specific leaf area (SLA), leaf life span, mass-based net photosynthetic capacity (Amass), nitrogen content (N(mass)), and phosphorus content (P(mass)). Alternatively, the combination of four simple, widely available climate metrics (mean annual temperature, mean annual precipitation, mean vapor pressure deficit, and solar irradiance) explain only 5-20% of the variation in those same five leaf traits. Adding the climate metrics to the qualitative PFTs as independent factors in the model increases explanatory power by 3-11% for the five traits. If a single easily measured leaf trait (SLA) is also included in the model along with qualitative plant traits and climate metrics, an additional 5-25% of the variation in the other four other leaf traits is explained, with the models accounting for 62%, 65%, 66%, and 73% of global variation in N(mass), P(mass), A(mass), and leaf life span, respectively. Given the wide availability of the summary climate data and qualitative PFT data used in these analyses, they could be used to explain roughly half of global variation in the less accessible leaf traits (A(mass), leaf life span, N(mass), P(mass)); this can be augmented to two-thirds of all variation if climatic and PFT data are used in combination with the readily measured trait SLA. This shows encouraging possibilities of progress in developing general predictive equations for macro-ecology, global scaling, and global modeling.     

Local and regional air pollution in Ireland during an intensive aerosol measurement campaign

An intensive two month measurement campaign has been performed during a two year study of major component composition of urban PM10 and PM2.5 in Ireland (J. Yin, A. G. Allen, R. M. Harrison, S. G. Jennings, E. Wright, M. Fitzpatrick, T. Healy, E. Barry, D. Ceburnis and D. McCusker, Atmos. Res., 2005, 78(3-4), 149-165). Measurements included size-segregated mass, soluble ions, elemental carbon (EC) distributions, fine and coarse fraction organic carbon (OC) and major gases along with standard meteorological measurements. The study revealed that urban emissions in Ireland had mainly a local character and therefore were confined within a limited area of 20-30 km radius, without significantly affecting regional air quality. Gaseous measurements have shown that urban emissions in Ireland had clear, but fairly limited influence on the regional air quality due to favorable mixing conditions at higher wind speeds, in particular from the western sector. Size-segregated mass and chemical measurements revealed a clear demarcation size between accumulation and coarse modes at about 0.8 microm which was constant at all sites. Carbonaceous compounds at the urban site accounted for up to 90% of the particle mass in a size range of 0.066-0.61 microm. Nss SO4(2-) concentrations in PM2.5 were only slightly higher at the urban site compared to the rural or coastal sites, while NO3- and NH4+ concentrations were similar at the urban and coastal sites, but were a factor of 2 to 3 higher than at the rural site. OC was highly variable between the sites and revealed clear seasonal differences. Natural or biogenic OC component accounted for <10% in winter and up to 30% in summer of the PM2.5 OC at urban sites. A contribution of biogenic OC component to PM2.5 OC mass at rural site was dominant.     

Determining phosphorus release rates to runoff from selected Alberta soils using laboratory rainfall simulation

Phosphorus losses from agricultural land can cause accelerated eutrophication of surface water bodies. This study evaluated the use of soil test phosphorus (STP) levels to predict dissolved inorganic phosphorus (DIP) concentrations in runoff water from agricultural soils using laboratory rainfall simulation. The objectives of this study were to determine (i) to what extent STP concentrations can be used as a basis to predict P losses from Alberta soils and (ii) how extended rainfall simulation run times affected DIP losses. Soil samples collected from a total of 38 field sites, widely scattered throughout the southern half of Alberta, were subjected to rainfall simulation in the laboratory. The STP concentrations were determined using Miller-Axley, Norwest, Kelowna, Modified Kelowna Mehlich-III, and distilled water extraction methods. Each rainfall simulation event lasted for at least 90 min. Runoff samples were collected in time series for the duration of each simulation, during two distinct runoff intervals: (i) for the first 30 min of continuous runoff (T30) and (ii) for 40 min during runoff equilibrium (Teq). For all the STP extractants and both runoff intervals, the relationship with DIP-flow-weighted mean concentration (FWMC) was linear and highly significant with r2 values ranging from 0.74 to 0.96. However, the slopes of the resulting regression lines were, on average, 1.85 times greater for the T30 runoff interval over those computed for the Teq interval. Thus experimental methodology greatly influenced regression parameters, suggesting that more work was needed to verify these relationships under natural conditions. In addition, with many of the r2 values greater than 0.90 there would be little, if any, benefit derived by including soil properties in regression analysis.     

Reconciling National and Global Priorities in Adaptation to Climate Change: With an Illustration from Uganda

Many developing countries, especially in Africa, contribute only very small amounts to the world total of greenhouse gas emissions. For them, the reduction of such emissions is not a priority, and the more important issue is to find ways to reduce their vulnerability to the projected climate change which is being imposed upon them largely as a result of emissions from developed countries. This priority does not accord with the ultimate objective of the United Nations Framework Convention on Climate Change, which is to achieve stabilization of greenhouse gas emissions. This paper reports upon studies in Uganda designed to help in the development of a national adaptation strategy, and addresses the need to reconcile such a strategy with the global priority accorded to mitigation and with national economic development priorities. Some features of a national climate change adaptation strategy are identified and questions are raised about the need for an international regime to facilitate and support adaptation.     

One Hundred Questions of Importance to the Conservation of Global Biological Diversity

Abstract:  We identified 100 scientific questions that, if answered, would have the greatest impact on conservation practice and policy. Representatives from 21 international organizations, regional sections and working groups of the Society for Conservation Biology, and 12 academics, from all continents except Antarctica, compiled 2291 questions of relevance to conservation of biological diversity worldwide. The questions were gathered from 761 individuals through workshops, email requests, and discussions. Voting by email to short-list questions, followed by a 2-day workshop, was used to derive the final list of 100 questions. Most of the final questions were derived through a process of modification and combination as the workshop progressed. The questions are divided into 12 sections: ecosystem functions and services, climate change, technological change, protected areas, ecosystem management and restoration, terrestrial ecosystems, marine ecosystems, freshwater ecosystems, species management, organizational systems and processes, societal context and change, and impacts of conservation interventions. We anticipate that these questions will help identify new directions for researchers and assist funders in directing funds.     

基于无人机平台的甲烷监测技术及其在油气行业的应用

对甲烷排放的精准监测是油气行业实现温室气体减排与管控的基础和前提。无人机具有灵活、可操作性强、覆盖范围广、运行成本低等特点,以无人机为飞行平台的甲烷监测技术在油气行业区域甲烷排放监测领域具有巨大的应用潜力。详细阐述了基于无人机平台的甲烷监测技术的优势,梳理了不同的无人机类型,并根据其飞行性能及载荷能力进行了比对,归纳了无人机有效载荷类型、特点及应用场景,总结了国内外无人机甲烷监测技术在油气行业的应用,旨在为基于无人机平台的甲烷监测技术在我国油气行业的应用提供理论和技术参考。     

Predictions of U.K. regulated power station contributions to regional air pollution and deposition: a model comparison exercise

Contributions of the emissions from a U.K. regulated fossil-fuel power station to regional air pollution and deposition are estimated using four air quality modeling systems for the year 2003. The modeling systems vary in complexity and emphasis in the way they treat atmospheric and chemical processes, and include the Community Multiscale Air Quality (CMAQ) modeling system in its versions 4.6 and 4.7, a nested modeling system that combines long- and short-range impacts (referred to as TRACK-ADMS [Trajectory Model with Atmospheric Chemical Kinetics-Atmospheric Dispersion Modelling System]), and the Fine Resolution Atmospheric Multi-pollutant Exchange (FRAME) model. An evaluation of the baseline calculations against U.K. monitoring network data is performed. The CMAQ modeling system version 4.6 data set is selected as the reference data set for the model footprint comparison. The annual mean air concentration and total deposition footprints are summarized for each modeling system. The footprints of the power station emissions can account for a significant fraction of the local impacts for some species (e.g., more than 50% for SO2 air concentration and non-sea-salt sulfur deposition close to the source) for 2003. The spatial correlation and the coefficient of variation of the root mean square error (CVRMSE) are calculated between each model footprint and that calculated by the CMAQ modeling system version 4.6. The correlation coefficient quantifies model agreement in terms of spatial patterns, and the CVRMSE measures the magnitude of the difference between model footprints. Possible reasons for the differences between model results are discussed. Finally, implications and recommendations for the regulatory assessment of the impact of major industrial sources using regional air quality modeling systems are discussed in the light of results from this case study.     

An Appraisal of Epidemiologic Data Concerning the Effect of Oxidants,Nitrogen Dioxide and Hydrocarbons upon Human Populations

A procedure is developed for determining costs to reduce air pollution emissions in a metropolitan area. Methods are. sufficiently general to be applicable in any region and sufficiently comprehensive to include analysis of all major sources, future trends, control limitations, and other factors of importance in a dynamic community. The analytical procedure examines relationships among emission inventories, regional growth, control trends, alternate control schemes, control costs, and optimum cost-effectiveness.

The cost analysis procedure is tested by application to the Delaware Valley. Costs are determined for reducing emissions to various levels between the years 1960 and 2000. Emissions from private automobiles are projected to decrease below the 1960 emission rate by 1980, at a cost of 150 million dollars per year. Stationary source emissions of sulfur dioxide and particulates can be reduced to 1960 levels by 1980 for 37 million dollars per year if "least cost" procedures are used (selective abatement). Uniform conversion to 0.5% sulfur fuel oil (equiproportional abatement) can effect a similar reduction in emissions for about 94 million dollars per year in 1980. Other cost analysis comparisons are made and projections to the year 2000 are included.