Thermochemical pretreatment of meat and bone meal and its effect on methane production

Since the solubilization of meat and bone meal (MBM) is a prerequisite in many MBM disposal approaches, enhancement of the solubilization by means of thermochemical pretreatment was investigated in this study at two temperatures (55°C and 131°C) and six sodium hydroxide (NaOH) concentrations (0, 1.25, 2.5, 5, 10 and 20 g/L). The MBM volatile solid (VS) reduction ratio was up to 66% and 70% at 55°C and 131°C, respectively. At the same temperature, the VS reduction ratio increased with the increase in the dosage of NaOH. The study on the methane (CH₄) production potential of pretreated MBM shows that the addition of NaOH at 55°C did not cause the inhibition of the succeeding CH₄ production process. However, CH₄ production was inhibited by the addition of NaOH at 131°C. The CH₄ production potential was in the range of 389 to 503 mL CH₄/g VS MBM and 464 to 555 mL CH₄/g VS MBM at 55°C and 131°C, respectively.     

佳木斯市四丰山风景区环境污染综合治理对策

佳木斯市四丰山风景区是黑龙江省政府确定的省级风景名胜区,由于近些年无序、过度的开发,环境现状急剧恶化,亟需治理。通过对其周边污染源及水库水质状况的调查,提出了污染治理方案,明确了综合治理的必要性。     

汶川地震期间天津地震前兆台网运行与管理

汶川地震发生后,天津市地震局迅速进入应急体制,高效应对突发事件.监测中心、预报中心全体人员坚守岗位,履行职责,较好地完成了汶川地震期间天津地震前兆台网运行监控、数据管理、台站综合评比、数据服务、总结评估等项工作,以无私奉献的团队精神为地震监测预报工作做出了应有的贡献.     

碱性过硫酸钾氧化-钼酸铵分光光度法测定水中的总磷及其不确定度的评定

经过消解前加入氢氧化钠和改用聚四氟乙烯消化管等方面的改进,碱性过硫酸钾氧化-钼酸铵分光度法的实际操作更简便,更适用于各类水样的监测。它具有较低的捡出限（O．004mg／L）,较高的精密度（RSD=1．1％）和较好的准确度（测定标样溶液相对误差1．6％,加标回收率为97．2％-102．1％）。测定IERM测量审核样的结果也较好（取得了合格证书）。不确定度的评定依照相关标准的原则进行,并使用残差来量化曲线不碹定度分量,减少了工作量。经评定,改进方法的扩展不确定度为3．2％。     

关于多氯联苯测定的探讨

对PCB测定中所使用的kroclor和单体标准品的区别、联系和使用进行了分析阐述,并对PCB测定中的气相色谱法、气相色谱质谱联用法、生物分析法、免疫分析法的优点、局限性进行了比较.同时对今后的PCB的测定提出了建议.     

从演化制度经济学角度分析资源诅咒现象

资源的诅咒几乎是发展经济学里面一个颠扑不破的命题,其含义是丰富的自然资源长期对经济发展有着极强的抑制作用.综述了当前从经济增长理论、宏观经济传导机制和委托代理理论的角度分析解释资源诅咒现象现状,重点探讨了从制度经济学角度分析资源诅咒存在的优势及不足,发现上述制度经济学角度对资源诅咒现象进行分析并没有考虑时间和上下文,忽略了很多看似不相关的因素,所以很难捕捉过去时间内利益结构所发生的变化.在此基础上,提出从演化制度经济学角度分析资源诅咒现象可以较好地解决上述问题.     

Evaluation of mercury speciation and removal through air pollution control devices of a 190 MW boiler

Air pollution control devices (APCDs) are installed at coal-fired power plants for air pollutant regulation. Selective catalytic reduction (SCR) and wet flue gas desulfurization (FGD) systems have the co-benefits of air pollutant and mercury removal. Configuration and operational conditions of APCDs and mercury speciation a ect mercury removal e ciently at coal-fired utilities. The Ontario Hydro Method (OHM) recommended by the U.S. Environmental Protection Agency (EPA) was used to determine mercury speciation simultaneously at five sampling locations through SCR-ESP-FGD at a 190 MW unit. Chlorine in coal had been suggested as a factor a ecting the mercury speciation in flue gas; and low-chlorine coal was purported to produce less oxidized mercury (Hg2+) and more elemental mercury (Hg0) at the SCR inlet compared to higher chlorine coal. SCR could oxidize elemental mercury into oxidized mercury when SCR was in service, and oxidation e ciency reached 71.0%. Therefore, oxidized mercury removal e ciency was enhanced through a wet FGD system. In the non-ozone season, about 89.5%–96.8% of oxidized mercury was controlled, but only 54.9%–68.8% of the total mercury was captured through wet FGD. Oxidized mercury removal e ciency was 95.9%–98.0%, and there was a big di erence in the total mercury removal e ciencies from 78.0% to 90.2% in the ozone season. Mercury mass balance was evaluated to validate reliability of OHM testing data, and the ratio of mercury input in the coal to mercury output at the stack was from 0.84 to 1.08.     

Bioaccumulation of cadmium bound to humic acid by the bivalve Meretrix meretirx Linnaeus from solute and particulate pathways

Humic acid is an important pool of heavy metals in sediments.Generally,the presence of refractory humic matter in aquatic systems would decrease the bioavailability of Cd and hence control the bioaccumulation of Cd in benthic animals.In the present work,we applied a suspending system to determine the relative importance of particulate and dissolved fractions of humic acid as Cd sources for the bivalve Meretrix meretrix and to investigate the difference of bioaccumulation characteristics of Cd adsorbed on di...     

A contact sex pheromone component of the emerald ash borer Agrilus planipennis Fairmaire (Coleoptera: Buprestidae)

Analyses of the elytral hydrocarbons from male and female emerald ash borer, Agrilus planipennis Fairmaire, that were freshly emerged vs. sexually mature (>10 days old) revealed a female-specific compound, 9-methyl-pentacosane (9-Me-C₂₅), only present in sexually mature females. This material was synthesized by the Wittig reaction of 2-decanone with (n-hexadecyl)-triphenylphosphonium bromide followed by catalytic reduction to yield racemic 9-Me C₂₅, which matched the natural compound by gas chromatography/mass spectrometry (retention time and EI mass spectrum). In field bioassays with freeze-killed sexually mature A. planipennis females, feral males spent significantly more time in contact and attempting copulation with unwashed females than with females that had been washed in n-hexane to remove the cuticular lipids. Hexane-washed females to which 9-Me-C₂₅ had been reapplied elicited similar contact time and percentage of time attempting copulation as unwashed females, indicating that 9-methyl-pentacosane is a contact sex pheromone component of A. planipennis. This is the first contact sex pheromone identified in the Buprestidae.     

A new approach to predicting the maximum temperature in dry drilling based on a finite element model

A new analysis approach is developed to predict the temperature in dry drilling. The working rake angle and the working relief angle which the effect of feed is considered at an arbitrary point in the leading cutting edge of a twist drill are developed for the equivalent model. Then finite element models are developed to predict the drilling temperature based on the equivalent model. Commercial finite element codes Abaqus, Deform 2D and Third Wave Systems AdvantEdge have been used. In simulations, different chip separation models and material models are applied in the three codes. And the effect of the laws of drilling velocities and feed rates on the temperature are investigated by the finite element method. Predicted results of the maximum temperatures by three codes are compared with experiments, respectively. Results indicate that the drilling temperature results of simulations have good agreement to the experimental ones, and the errors are all less than 15%.