Optimization of photo-Fenton process parameters on carbofuran degradation using central composite design

Carbofuran, one of the most toxic and biorefractory carbamate compounds, is widely used in insecticides in Taiwan (9-18% of total insecticides production per year). In the present study, a central composite design experiment was used to study the effect of photo-Fenton treatment on carbofuran solution and to optimize the process variables such as carbofuran concentration (1-100 mg L(-1)), H(2)O(2) dosage rate (0.25-6 mg L(-1) min(-1)) and Fe(3+) dosage (1-50 mg L(-1)), which influenced the efficiency of carbofuran degradation and mineralization. The results indicated that all the variables investigated in this study had significant roles in the degradation and mineralization of carbofuran in solution. The carbofuran degradation and mineralization efficiencies were increased with increase in H(2)O(2) dosage rate and Fe(3+) dosage, and with decrease in carbofuran concentration. Furthermore, optimum values of both H(2)O(2) dosage rate and Fe(3+) dosage were found to shift to higher values as carbofuran concentration increased. Based on the model obtained in this study, optimum H(2)O(2) dosage rate and Fe(3+) dosage were found to be 4 mg L(-1) min(-1) and 20 mg L(-1), respectively, for 51 mg L(-1) of carbofuran concentration. Under these conditions, carbofuran was completely removed within 30 min and coupled with 78% mineralization at the end of experiment.     

Removal of genotoxicity in chlorinated secondary effluent of a domestic wastewater treatment plant during dechlorination

Purpose  

Dechlorination with tetravalent sulfur is widely used in wastewater treatment processes after chlorination. Dechlorination can remove certain genotoxic disinfection by-products (DBPs). However, the reactions occurring during dechlorination of chlorinated secondary effluent and their genotoxic chemicals are still very complex, and the related genotoxicity changes remain unknown. Therefore, the effects of dechlorination on genotoxicity in secondary effluent and its fractions and typical genotoxic chemical after chlorination were evaluated.     

VOC amounts in ambient areas of a high-technology science park in Taiwan: their reciprocal correlations and impact on inhabitants

Introduction  

This study presents bihourly, seasonal, and yearly concentration changes in volatile organic compounds (VOCs) in the inlet and effluent water of the wastewater treatment plant (WWTP) of a high-technology science park (HTIP) in Taiwan, with the VOC amounts at different sites correlated geologically.     

Biosorption of Basic Violet 5BN and Basic Green by waste brewery’s yeast from single and multicomponent systems

Background and aim  

The biosorption of Basic Violet 5BN (BV) and Basic Green (BG) by waste brewery’s yeast (WBY) from single and binary systems was investigated.     

Heterogeneous photocatalytic degradation of methyl orange in schwertmannite/oxalate suspension under UV irradiation

Introduction

Schwertmannite was synthesized through an oxidation of FeSO₄ by Acidithiobacillus ferrooxidans LX5 cell suspension at an initial pH?2.5 and 28°C for 3?days and characterized using X-ray diffraction spectroscopy and scanning electron microscope. The schwertmannite photocatalytic degradation of methyl orange (MO) by oxalate was investigated at different initial pH values, concentrations of schwertmannite, oxalate, and MO.

Results

The results demonstrated that photodegradation of MO in the presence of schwertmannite or oxalate alone was very weak. However, the removal of MO was significantly enhanced when schwertmannite and oxalate coexisted in the reaction system. Low pH (4 or less) was beneficial to the degradation of MO. The optimal doses of schwertmannite and oxalate were 0.2?g?L^?1 and 2?mM, respectively. Hydroxyl radicals (·OH) and Fe(II), the intermediate products, were also examined during the reaction to explore their correlation with the degradation of MO.

Conclusion

A possible mechanism for the photocatalytic decomposition of MO in the study was proposed. The formation of Fe(III)-oxalate complexes on the surface of schwertmannite was a precursor of H₂O₂ and Fe(II) production, further leading to the yield of ·OH responsible for the decomposition of MO.     

k-C*模型的人工湿地模拟研究

采用自由表面流人工湿地,对广东省中山市某小区对应段的河涌进行生态修复改造。基于k-C*模型的计算结果表明,在对现有河涌的面积的利用下,TP和NH4+-N的去除效果受到限制。采用多因素正交实验对模型的计算结果进行实验验证和分析,研究了4种植物、4种基质,分别在2、4、6和8 d水力停留时间(HRT)下对TP和NH4+-N的去除效果,得到影响TP和NH4+-N去除效果的因素主次顺序分别为基质→植物→HRT和基质→HRT→植物;各因素的最佳水平条件分别为:风车草、颗粒活性炭、4 d(HRT)。在最佳水平条件下进行实验,结果表明,TP和NH4+-N的浓度均可达到出水排放标准浓度指标。k-C*模型的计算值总是比实验值偏高,但两者之间的误差在一个数量级范围内。     

西安市城市主干道路面径流初期冲刷效应

以西安市城市主干道南二环太白路高架桥为路面径流采样区域,采用人工等时间间隔采样方法,在桥梁排水立管对2010年9—11月的3场径流事件进行全程采样,测试径流过程SS、COD、溶解性COD、NH3-N、Pb、溶解性Pb、Zn和溶解性Zn的浓度变化,研究路面径流的初期冲刷效应及其影响因素。结果表明,西安市城市主干道路面径流污染严重,降雨数小时后的末期径流仍具有较高的污染水平;径流过程污染物浓度变化规律与其赋存形态有关,SS、COD、Pb等以颗粒态为主的污染物的浓度随雨强变化剧烈波动,NH3-N、溶解态COD、溶解态Zn等以溶解态为主的污染物浓度变化受雨强影响较小,随径流过程呈逐渐减小趋势;路面径流初期冲刷现象并非普遍存在,与污染物的赋存状态和场次降雨特征密切相关,溶解态污染物易于出现初期冲刷现象,颗粒态污染物是否出现初期冲刷与场次降雨特征有关;测试的3场径流事件初期30%的径流携带的SS、COD、溶解性COD、NH3-N、Pb、Zn和溶解性Zn的负荷占场次径流总负荷的比例分别为21.8%～50.0%、25.5%～49.3%、36.3%～52.6%、52.6%～66.7%、26.8%～45.0%、27.2%～63.4%和36.2%～62.6%,表明仅对初期径流进行治理无法实现对西安市路面径流污染的有效控制。     

菱镁矿尾矿制备高活性MgO的性能表征

菱镁矿尾矿经预处理后,在一定条件下制备高活性MgO。使用热重-差热分析仪,分析菱镁矿尾矿的分解温度,应用X射线衍射、SEM分析不同煅烧温度、保温时间对MgO晶体结构的影响,并根据Scherrer公式计算MgO晶粒的尺寸。通过电导率仪测定MgO水化电导率,分析不同条件下的MgO活性,探讨煅烧温度、保温时间、颗粒细度与MgO活性之间的关系。结果发现:煅烧温度在1 050℃,保温时间60 min时,菱镁尾矿完全分解,MgO活性最佳;煅烧温度越高,保温时间越长,MgO的活性越差;MgO颗粒细度越小,活性越高。     

某生活垃圾卫生填埋场渗滤液的梯度分离与表征

目前,渗滤液中污染物的粒度分布及其在渗滤液污染控制中的作用日益受到关注。通过系列微滤膜(1.2μm及0.45μm)对某生活垃圾卫生填埋场渗滤液各处理单元的渗滤液进行梯度分离,发现悬浮物对COD、浊度的影响较大;COD主要在胶体态和可溶解态间分配,不同渗滤液中的分配情况不同;磷主要与胶体、悬浮物以各种形式结合而存在;细胶粒和溶解态等小分子对TN的贡献大;不同粒度物质对pH的影响不明显;总残渣在可溶态组分中所占比例较大。膜微滤处理渗滤液可以有效的去除一部分物质,使COD、TP、TN、浊度、电导率都有不同程度的降低,pH逐渐升高,但对总N、残渣的去除效果不好。     

应用表面活性剂-生物柴油微乳液去除污染土壤中多环芳烃

针对修复焦化厂高浓度多环芳烃污染土壤高成本的现实,采用以非食用性植物油、生物柴油、表面活性剂及其乳化合成的微乳液为淋洗剂,比较不同淋洗剂的淋洗效果。结果表明乳化合成的微乳液对焦化厂土壤中多环芳烃的总去除率高于单独使用表面活性剂为淋洗剂对土壤中多环芳烃的总去除率,说明生物柴油及植物油与表面活性剂乳化形成的微乳液对原污染土壤中的多环芳烃具有显著的增溶作用。1%TW-80和2.5%TW-80对土壤中多环芳烃总去除率分别为11%和14%;以2.5%TW-80为原料乳化合成的微乳液的淋洗去除率较以1%TW-80为原料乳化合成的微乳液高,总去除率分别为15%～30%和11%～18%;以生物柴油为原料乳化合成的微乳液的淋洗去除率较以植物油为原料乳化合成的微乳液高,分别为17%～30%和15%～23%,且对多环芳烃的去除率与其辛醇水分配系数(logKow)呈线性相关关系。