Water Hyacinth in China: A Sustainability Science-Based Management Framework

The invasion of water hyacinth (Eichhornia crassipes) has resulted in enormous ecological and economic consequences worldwide. Although the spread of this weed in Africa, Australia, and North America has been well documented, its invasion in China is yet to be fully documented. Here we report that since its introduction about seven decades ago, water hyacinth has infested many water bodies across almost half of China’s territory, causing a decline of native biodiversity, alteration of ecosystem services, deterioration of aquatic environments, and spread of diseases affecting human health. Water hyacinth infestations have also led to enormous economic losses in China by impeding water flows, paralyzing navigation, and damaging irrigation and hydroelectricity facilities. To effectively control the rampage of water hyacinth in China, we propose a sustainability science-based management framework that explicitly incorporates principles from landscape ecology and Integrated Pest Management. This framework emphasizes multiple-scale long-term monitoring and research, integration among different control techniques, combination of control with utilization, and landscape-level adaptive management. Sustainability science represents a new, transdisciplinary paradigm that integrates scientific research, technological innovation, and socioeconomic development of particular regions. Our proposed management framework is aimed to broaden the currently dominant biological control-centered view in China and to illustrate how sustainability science can be used to guide the research and management of water hyacinth.     

FeS对CW-MFC系统降解活性艳红X-3B效果及过程的影响

在自行构建的人工湿地-微生物燃料电池(CW-MFC)系统中,以砾石填料为对照,研究了FeS对活性艳红X-3B脱色效果及降解过程的影响.结果表明,加在底层区域的FeS能够显著提高CW-MFC对活性艳红X-3B的脱色效果和系统产电性能.FeS的投加使得系统脱色率在进水活性艳红X-3B浓度200mg/L、葡萄糖浓度100mg/L条件下达到99.83%.在进水活性艳红X-3B浓度100mg/L、葡萄糖浓度200mg/L条件下,FeS组最大功率密度达到0.849W/m³.活性艳红X-3B在系统中的脱色主要发生在底层和阳极区域,由紫外-可见全波长扫描图谱和GC-MS扫描图谱可知FeS在该区域促进了偶氮双键的断裂,并有利于脱色产物苯胺、三嗪结构、萘环结构的进一步降解.     

固相萃取-超高效液相色谱-串联质谱法测定斑马鱼暴露体系4种双酚类环境激素的研究

为评估双酚类环境激素对水环境可能造成的环境影响,建立固相萃取-超高效液相色谱-串联质谱(SPE-UPLC-MS/MS)法测定斑马鱼暴露体系中的双酚C(BPC)、双酚F(BPF)、双酚S(BPS)、双酚Z(BPZ). 对前处理条件进行优化,斑马鱼样品依次采用6 mL乙腈溶液提取,30 min超声萃取及振荡混合,8 000 r/min下离心10 min,重复2次,于?80 ℃冷冻除脂48 h,过滤并用超纯水稀释至500 mL. 采用Generik H2P柱萃取上述鱼样及养殖水体样品,依次用10 mL 10%甲醇水溶液(V/V)淋洗,10 mL甲醇溶液洗脱. 优化参数确定最佳质谱条件,以甲醇-水溶液为流动相进行梯度洗脱,采用电喷雾电离、负离子选择反应监控(SRM)模式、同位素内标法进行测定. 结果表明:①固相萃取-超高效液相色谱-串联质谱法的检出限为0.019~0.60 μg/L,定量限为0.06~1.89 μg/L,BPS在0.5~100 μg/L范围内线性关系良好,相关系数为0.999 0,BPZ、BPF和BPC在1~100 μg/L范围内线性关系良好,相关系数在0.998 9~0.999 8范围内. ②在1.5、4.5、15 μg/L双酚类环境激素的添加浓度下,养殖水体中目标物的回收率为91.45%~102.91%,相对标准偏差为1.47%~11.04%,斑马鱼体内目标物的回收率为85.95%~97.45%,相对标准偏差为4.63%~16.36%. ③高浓度暴露组中,鱼体内BPF、BPS、BPC含量约是低浓度暴露组的10倍,而BPZ含量在两组间无明显差异. 研究显示,BPC、BPF、BPS、BPZ短时间内在斑马鱼体内产生了富集,通过分析斑马鱼全鱼样品、养殖水样及实际景观水体样品,证明固相萃取-超高效液相色谱-串联质谱法样品回收率高、检出限低、灵敏度高、重现性好,具有较好的实用性.      

Hydrothermal-treated Pt/Al2O3 as an excellent catalyst for toluene total oxidation

The preparation of highly active supported noble metal catalysts with a low noble metal loading has always been the ultimate goal of researchers working on catalysis. Hydrothermally treated Pt/Al₂O₃ (Pt/Al₂O₃-H) exhibits better catalytic activity than that (Pt/Al₂O₃-C) treated via the conventional calcination approach. At the high space velocity of 100,000 mL/(g∙hr), the temperature that correspond to 50% toluene conversion (T₅₀) of Pt/Al₂O₃-H is 115°C lower than that of Pt/Al₂O₃-C, and the turnover frequency (TOF) value can reach 0.0756 sec⁻¹. The mechanism by which the hydrothermal approach enhances Pt/Al₂O₃ activity has been investigated. The structure associated with the high catalytic activity of Pt nanoparticles (NPs) can be retained via hydrothermal treatment. Furthermore, the support is transformed to AlO(OH) with numerous surface hydroxyl groups, which in turn can facilitate the adsorption of toluene. And the synergistic effects of Pt NPs and AlO(OH) increases the contents of Pt in oxidation state and active oxygen, which are beneficial for toluene oxidation.     

Impact of pre-oxidation on the formation of byproducts in algae-laden water disinfection: Insights from fluorescent and molecular weight

Pre-oxidation has been reported to be an effective way to remove algal cells in water, but the released algal organic matter (AOM) could be oxidized and lead to the increment in disinfection by-product (DBP) formation. The relationship between pre-oxidation and AOM-derived DBP formation needs to be approached more precisely. This study compared the impact of four pre-oxidants, ozone (O₃), chlorine dioxide (ClO₂), potassium permanganate (KMnO₄) and sodium hypochlorite (NaClO), on the formation of nitrogenous (N-) and carbonaceous (C-) DBPs in AOM chlorination. The characterization (fluorescent properties, molecular weight distribution and amino acids concentration) on AOM samples showed that the characterization properties variations after pre-oxidation were highly dependent on the oxidizing ability of oxidants. The disinfection experiments showed that O₃ increased DBP formation most significantly, which was consistent with the result of characterization properties variations. Then canonical correspondent analysis (CCA) and Pearson's correlation analysis were conducted based on the characterization data and DBP formation. CCA indicated that C-DBPs formation was highly dependent on fluorescent data. The formation of haloacetic acids (HAAs) had a positive correlation with aromatic protein-like component while trichloromethane (TCM) had a positive correlation with fulvic acid-like component. Pearson's correlation analysis showed that low molecular weight fractions were favorable to form N-DBPs. Therefore, characterization data could provide the advantages in the control of DBP formation, which further revealed that KMnO₄ and ClO₂ were better options for removing algal cells as well as limiting DBP formation.     

The role of doped-Mn on enhancing arsenic removal by MgAl-LDHs

To meet the challenges posed by global arsenic water contamination, the MgAlMn-LDHs with extraordinary efficiency of arsenate removal was developed. In order to clarify the enhancement effect of the doped-Mn on the arsenate removal performance of the LDHs, the cluster models of the MgAlMn-LDHs and MgAl-LDHs were established and calculated by using density functional theory (DFT). The results shown that the doped-Mn can significantly change the electronic structure of the LDHs and improve its chemical activity. Compared with the MgAl-LDHs that without the doped-Mn, the HOMO-LUMO gap was smaller after doping. In addition, the -OH and Al on the laminates were also activated to improve the adsorption property of the LDHs. Besides, the doped-Mn existed as a novel active site. On the other hand, the MgAlMn-LDHs with the doped-Mn, the increased of the binding energy, as well as the decreased of the ion exchange energy of interlayer Cl⁻, making the ability to arsenate removal had been considerably elevated than the MgAl-LDHs. Furthermore, there is an obvious coordination covalent bond between arsenate and the laminates of the MgAlMn-LDHs that with the doped-Mn.     

Interactions between lead(II) ions and dissolved organic matter derived from organic fertilizers incubated in the field

This work was to study composition characteristics and the subsequent effect on the lead (Pb) binding properties of dissolved organic matter (DOM) derived from seaweed-based (SWOF) and chicken manure organic fertilizers (CMOF) during a one-year field incubation experiment using the excitation-emission matrix-parallel factor (EEM-PARAFAC) and two-dimensional correlation spectroscopy (2DCOS) analysis. Results showed that high aromatic and hydrophobic fluorescent substances were enriched in CMOF-derived DOM and SWOF-derived DOM and enhanced over time. And phenolic groups in the fulvic-like substances for SWOF-derived DOM and carboxyl groups in the humic-like substances for CMOF-derived DOM had the fastest responses over time, respectively. Moreover, both non-fluorescent polysaccharides and fluorescent humic-like substances or fulvic-like substances with aromatic (C=C) groups first participated in the binding process of Pb to SWOF-derived DOM on day 0 and 180 during the lead binding process. In contrast, humic-like substances associated with aromatic (C=C) and phenolic groups gave a faster response to Pb binding on day 360. Regarding CMOF-derived DOM, the fulvic-like substances associated with aromatic (C=C) and carboxylic groups displayed a faster response to Pb ions on day 0. Nonetheless, polysaccharides and humic-like associated with phenolic groups had a faster response on days 180 and 360. It is noteworthy that the polysaccharides, which participated in Pb binding to CMOF-derived DOM, posed a higher risk of Pb in the environment after 360 days. Therefore, these findings gave new insights into the long-term applications of commercial organic fertilizers for the amendment of soil.     

Identification and characterization of Fe3O4/peroxodisulfate advanced oxidation products from sulfameter

Sulfonamides (SAs) are one of the most widely used antibiotics and their residuals in the environment could cause some negative environmental issues. Advanced oxidation such as Fenton-like reaction has been widely applied in the treatment of SAs polluted water. Degradation rates of 95%-99.7% were achieved in this work for the tested 8 SAs, including sulfisomidine, sulfameter (SME), phthalylsulfathiazole, sulfamethoxypyridazine, sulfamonomethoxine, sulfisoxazole, sulfachloropyridazine, and sulfadimethoxine, in the Fe₃O₄/peroxodisulfate (PDS) oxidation system after the optimization of PDS concentration and pH. Meanwhile, it was found that a lot of unknown oxidation products were formed, which brought up the uncertainty of health risks to the environment, and the identification of these unknown products was critical. Therefore, SME was selected as the model compound, from which the oxidation products were never elucidated, to identify these intermediates/products. With liquid chromatography-high resolution tandem mass spectrometry (LC-HRMS/MS), 10 new products were identified, in which 2-amino-5-methoxypyrimidine (AMP) was confirmed by its standard. The investigation of the oxidation process of SME indicated that most of the products were not stable and the degradation pathways were very complicated as multiple reactions, such as oxidation of the amino group, SO₂ extrusion, and potential cross-reaction occurred simultaneously. Though most of the products were not verified due to the lack of standards, our results could be helpful in the evaluation of the treatment performance of SAs containing wastewater.     

MoS2 quantum dots based MoS2/HKUST-1 composites for the highly efficient catalytic oxidation of elementary mercury

Due to the ever-tightening regulation on mercury emission in recent decades, there is an urgent need to develop novel materials for the removal of elemental mercury at coal-fired power plants. In this study, a series of MoS₂ quantum dots (QDs)-based MoS₂/HKUST-1 composite materials were prepared. It is found that MoS₂ QDs were encapsulated by HKUST-1 and enhanced the crystallinity and specific surface area of HKUST-1. The MoS₂/HKUST-1 showed excellent performance in catalytic oxidation of Hg⁰ as compared with pristine HKUST-1. It is found that surface layer of lattice oxygens is active and participates in Hg⁰ oxidation, while the consumption of surface oxygens then leads to the formation of oxygen vacancies on the surface. These vacancies are effective in the adsorption and dissociation of O₂, which subsequently participates in the oxidation of Hg⁰. Moreover, the study on the influence of commonly seen gas components, such as SO₂, NO, NH₃ and H₂O, etc., on Hg⁰ oxidation demonstrated that synergistic effects exist among these gas species. It is found that the presence of NO promotes the oxidation of Hg⁰ using oxygen as the oxidant.     

Ozone episodes during and after the 2018 Chinese National Day holidays in Guangzhou: Implications for the control of precursor VOCs

The impact of reducing industrial emissions of volatile organic compounds (VOCs) on ozone (O₃) pollution is of wide concern particularly in highly industrialized megacities. In this study, O₃, nitrogen oxides (NOx) and VOCs were measured at an urban site in the Pearl River Delta region during the 2018 Chinese National Day Holidays and two after-holiday periods (one with ozone pollution and another without). O₃ pollution occurred throughout the 7-day holidays even industrial emissions of VOCs were passively reduced due to temporary factory shutdowns, and the toluene to benzene ratios dropped from ∼10 during non-holidays to ∼5 during the holidays. Box model (AtChem2-MCM) simulations with the input of observation data revealed that O₃ formation was all VOC-limited, and alkenes had the highest relative incremental reactivity (RIR) during the holiday and non-holiday O₃ episodes while aromatics had the highest RIR during the non-pollution period. Box model also demonstrated that even aromatics decreased proportionally to levels with near-zero contributions of industrial aromatic solvents, O₃ concentrations would only decrease by less than 20% during the holiday and non-holiday O₃ episodes and ozone pollution in the periods could not be eliminated. The results imply that controlling emissions of industrial aromatic solvents might be not enough to eliminate O₃ pollution in the region, and more attention should be paid to anthropogenic reactive alkenes. Isoprene and formaldehyde were among the top 3 species by RIRs in all the three pollution and non-pollution periods, suggesting substantial contribution to O₃ formation from biogenic VOCs.