Tolerance of the black soldier fly,Hermetia illucens (Diptera: Stratiomyidae) to pH value,pungency, and NaCl in foodstuffs北大核心CSCD

The black soldier fly (BSF), Hermetia illucens, has been considered impressive as a saprophagous insect, for its high ability to convert organic waste to insect protein and oil. Hence, it has been regarded by the municipal administration that BSF might be used as a medium to deal with food waste. However, food waste in China has been characterized as having a high salt content, oily, and very spicy, which usually renders them unsuitable for animal feeding. In order to assess the technological reliability for BSF conversion of food waste, the tolerance of BSF for pH values, pungency, and NaCl in food were investigated in this case. Results indicated that strong acidity (pH = 3) was not good for the development of BSF, demonstrating less body weight and eclosion failure. In contrast, strong basicity (pH = 11) seemed to be beneficial for larval development with high biomass, and there is no difference in pupation, eclosion, larval biomass, and livability for BSF for pH values between 5 and 11. With regards to salinity, liner correlations were observed; the salinity strength increased along with the extension of the larval phase, but body weight, pupation rate, emerging rate, and livability were still consistent under 6% density of salinity. Influence of pungency on BSF larvae has not yet been found. In conclusion, BSF showed a high tolerance to pH value, pungency, and salinity in foodstuffs. Hence, it is expected that food waste from common environments might have a lesser possibility to cause negative effects on BSF development, which could be good news for BSF conversion technology. As for the process design, the conclusion suggested that food waste optimum for BSF is expected to be alkaline and low-salt, which would be helpful to improve the efficiency and harvest. © 2018 Science Press. All rights reserved.     

Mycelial culture of wild Inonotus hispidus parasitizing the jujube tree and the cultivation conditions of its fruit body on rice medium北大核心CSCD

Inonotus hispidus is a kind of rare medicinal fungus, and its natural resources are very scarce. Currently, the artificial cultivation technology of I. hispidus is not completely developed, and this reflects on its extremely low biological conversion rate and long cultivation period. In order to improve the bioconversion rate and shorten the production cycle of I. hispidus, we first analyzed the mycelia culture conditions of the collected I. hispidus, and then we further explore the method of domesticated cultivation of its fruiting body in rice medium. During the process of mycelial culture, the suitable temperature, pH, carbon source, and nitrogen source for mycelial growth were selected using the mycelial growth rate as index. During the domesticated cultivation of the fruiting body, the suitable culture medium for its growth was selected using the bioconversion rate as index. Screening results of mycelial culture conditions showed that the optimal culture conditions for the growth of mycelium of the wild I. hispidus were: temperature of 25 °C, initial pH of 6.0, glucose as the carbon source, and yeast extract powder as the source of nitrogen. The results of the domesticated cultivation showed that the biotransformation rate of I. hispidus was higher when using rice as the main medium substrate. The optimal cultivation conditions were: a 0.2% yeast extract content in the nutrient solution, a 1:1.6 ratio of rice to nutrient solution, and a 4 mL inoculum of the liquid strain. Under these conditions, it took about 4 days for the mycelium to grow over the cultivation medium. The time required for the differentiation of the primordium to form fruit bodies was about 20 days, and the bioconversion rate reached 28.70% ± 5.05%. The results of this study indicate the feasibility of using rice as the main substrate for the cultivation of I. hispidus, and it also provide new insights for the finding of new cultivation substrates for other rare medicinal fungi. © 2018 Science Press. All rights reserved.     

垃圾焚烧炉渣对电镀废水中Cu的吸附特性

以垃圾焚烧炉渣作吸附剂,对电镀废水中Cu的吸附特性进行了研究,包括吸附速率、解吸速率、吸附等温线和连续柱吸附实验等。结果表明,炉渣对电镀废水中Cu的吸附平衡时间和解吸平衡时间均为8 h。炉渣对Cu的吸附等温线为直线型,可用Henry型方程进行拟合。连续柱吸附实验结果表明,炉渣对电镀废水在连续吸附55 h后吸附能力逐渐丧失,累计最大吸附量为921 μg/g,而炉渣对人工配水在连续吸附80 h后吸附能力完全丧失,累计最大吸附量为2 687 μg/g。     

山梨酸废水在ABR中的基质降解行为

稳态条件下,采用厌氧折流板反应器(anaerobic baffled reactor,ABR)处理山梨酸废水并进行基质降解动力学研究.实验表明,在污泥负荷为0.54～1.63 kg COD/(kg VSS·d)的范围内,COD去除率随着负荷的增加从85%降到55%.各隔室出水COD沿程递减,前3个隔室承担了去除COD的重要作用,但随着污泥负荷的增加,后部承担的COD去除率比例增大.基于各串联隔室完全混合的假定,推导ABR中山梨酸废水的基质降解动力学方程,并通过实验确定相关动力学参数及相应的动力学方程.实测值与预测值基本吻合.     

污泥减量化与资源化研究进展

随着污水处理量增加,污泥的产生量也日益巨大.如何使污泥无害化、减量化和资源化已越来越受人们的关注.针对目前传统污泥处理与处置方法存在的问题,重点介绍了近年来污泥减量化和资源化的处理技术,并分析了新技术研究情况和应用前景,为污泥合理处理与处置提供参考.     

Pb/Zn冶炼废渣中重金属的生物浸出-盐浸处理

利用中温嗜热菌对某铅锌冶炼废渣进行生物浸出盐浸处理研究,并根据国家固体废物浸出毒性方法(HJ/T299-2007)对盐浸后余渣进行毒性分析。研究结果表明,在pH 1.5、温度65℃、矿浆浓度5%的优化条件下生物浸出3 d后,废渣中Cu、In、Ga和Zn的浸出率分别达到了91.5%、91.8%、84.9%和93.4%;盐浸生物浸出渣,其浸出液中Ag、Pb浓度分别为7.6和247.5 mg/L,可从废渣中有效回收Cu、In、Ga、Zn、Ag和Pb。生物浸出盐浸处理后余渣约为原渣量的70%;毒性分析浸出液中重金属元素Ag、As、Cd、Cu、Pb和Zn浓度分别为2～3.5、2～3、0.3～0.5、30～50、2～4、20～60 mg/L,低于国家危险废物鉴别标准(GB5085.3-2007)。根据试验结果,提出了针对冶炼废渣资源化、减量化、无害化的生物浸出盐浸联用工艺。     

Analysis of biomagnification of persistent organic pollutants in the aquatic food web of the Mekong Delta, South Vietnam using stable carbon and nitrogen isotopes

The present study elucidated the biomagnification profiles of persistent organic pollutants (POPs) through a tropical aquatic food web of Vietnam based on trophic characterization using stable nitrogen analysis. Various biological samples collected from the main stream of the Mekong Delta were provided for the analysis for both POPs, and stable nitrogen and carbon isotope ratios. Of the POPs analyzed, dichlorodiphenyltrichloroethane and its metabolites (DDTs) were the predominant contaminants with concentrations ranging from 0.058 to 12 ng/g wet weight, followed by polychlorinated biphenyls (PCBs) at 0.017-8.9 ng/g, chlordane compounds (CHLs) at 0.0043-0.76 ng/g, tris-4-chlorophenyl methane (TCPMe) at N.D.-0.26 ng/g, hexachlorocyclohexane isomers (HCHs) at N.D.-0.20 ng/g and hexachlorobenzene (HCB) at 0.0021-0.096 ng/g. Significant positive increases of concentrations in DDTs, CHLs, and TCPMe against the stable nitrogen ratio (delta(15)N) were detected, while, concentrations of HCHs and HCB showed no significant increase. The slopes of the regression equations between the log-transformed concentrations of these POPs and delta(15)N were used as indices of biomagnification. The slopes of the POPs for which positive biomagnification was detected ranged from 0.149 to 0.177 on a wet weight basis. The slopes of DDTs and CHLs were less than those reported for a marine food web of the Arctic Ocean, indicating that less biomagnification had occurred in the tropical food web. Of the isomers of CHLs, unlike the studies of the Arctic Ocean, oxychlordane did not undergo significant biomagnification through the food web of the Mekong Delta. This difference is considered to be due to a lack of marine mammals, which might metabolize cis- and trans-chlordane to oxychlordane, in the Mekong Delta ecosystem. The biomagnification profile of TCPMe is reported for the first time in the present study.     

umu试验菌种保存条件优化研究

研究了umu试验菌株(Salmonella typhimurimu TA1535/pSK1002)的菌种在普通冰箱中保存时其生长曲线和活性的变化,菌种经活化后可以得到稳定的活化生长曲线以及比较稳定的4-NQO活性曲线.通过菌种活化,使得umu试验菌种在普通冰箱中保存就能具有很好的活性和稳定性,极大地降低了保存难度,简化了菌种保存操作步骤,增加了试验的可重复性,有利于umu试验在实际环境样品检测中的应用.     

A directional passive air sampler for monitoring polycyclic aromatic hydrocarbons (PAHs) in air mass

A passive air sampler was developed for collecting polycyclic aromatic hydrocarbons (PAHs) in air mass from various directions. The airflow velocity within the sampler was assessed for its responses to ambient wind speed and direction. The sampler was examined for trapped particles, evaluated quantitatively for influence of airflow velocity and temperature on PAH uptake, examined for PAH uptake kinetics, calibrated against active sampling, and finally tested in the field. The airflow volume passing the sampler was linearly proportional to ambient wind speed and sensitive to wind direction. The uptake rate for an individual PAH was a function of airflow velocity, temperature and the octanol-air partitioning coefficient of the PAH. For all PAHs with more than two rings, the passive sampler operated in a linear uptake phase for three weeks. Different PAH concentrations were obtained in air masses from different directions in the field test.     

Sorption of phenanthrene by dissolved organic matter and its complex with aluminum oxide nanoparticles

Intent of this study was to explore the potential application of polymerin, the polymeric, dissolved organic matter fraction from olive oil wastewaters, in technologies aimed at remediating hydrophobic organic compounds (HOCs) point-source pollution. Phenanthrene binding with polymerin was investigated. Moreover, the effect of addition of micro and nanoscale aluminum oxides (Al₂O₃) was studied, as well as sorption of polymerin on the oxides. Phenanthrene binding capacity by polymerin was notably higher than the sorption capacities for both types of Al₂O₃ particles. Polymerin sorption on nanoparticles was nearly 100 times higher than microparticles. In a three-phase system, using microparticles, higher phenanthrene sorption was found by adding into water polymerin, oxides and phenanthrene simultaneously. In contrast, using nanoparticles, a considerable enhancement of phenanthrene sorption was shown by adding phenanthrene to a pre-formed and dried polymerin-oxide complex. These findings support the application of polymerin, especially associated with Al₂O₃ nanoparticles, in remediation of water contaminated with HOCs. This work highlights the significant role of nanoparticles.