Ammonia emissions from the composting of different organic wastes. Dependency on process temperature

Ammonia emissions were quantified for the laboratory-scale composting of three typical organic wastes with medium nitrogen content: organic fraction of municipal solid wastes, raw sludge and anaerobically digested sludge; and the composting of two wastes with high nitrogen content: animal by-products from slaughterhouses and partially hydrolysed hair from the leather industry. All the wastes were mixed with the proper amount of bulking agent. Ammonia emitted in the composting of the five wastes investigated revealed a strong dependence on temperature, with a distinct pattern found in ammonia emissions for each waste in the thermophilic first stage of composting (exponential increase of ammonia emitted when increasing temperature) than that of the mesophilic final stage (linear increase of ammonia emissions when increasing temperature). As composting needs high temperatures to ensure the sanitisation of compost and ammonia emissions are one of the main environmental impacts associated to composting and responsible for obtaining compost with a low agronomical quality, it is proposed that sanitisation is conducted after the first stage in large-scale composting facilities by a proper temperature control. CAPSULE: Ammonia emission pattern and correlation with process temperature are presented for the composting process of different organic wastes.     

Immobilization of heavy metals in polluted soils by the addition of zeolitic material synthesized from coal fly ash

The use of zeolitic material synthesized from coal fly ash for the immobilization of pollutants in contaminated soils was investigated in experimental plots in the Guadiamar Valley (SW Spain). This area was affected by a pyrite slurry spill in April 1998. Although reclamation activities were completed in a few months, residual pyrite slurry mixed with soil accounted for relatively high leachable levels of trace elements such as Zn, Pb, As, Cu, Sb, Co, Tl and Cd. Phytoremediation strategies were adopted for the final recovery of the polluted soils. The immobilization of metals had previously been undertaken to avoid leaching processes and the consequent groundwater pollution. To this end, 1100 kg of high NaP1 (Na6[(AlO2)6(SiO2)10] .15H2O) zeolitic material was synthesized using fly ash from the Teruel power plant (NE Spain), in a 10 m3 reactor. This zeolitic material was manually applied using different doses (10000-25000 kg per hectare), into the 25 cm topsoil. Another plot (control) was maintained without zeolite. Sampling was carried out 1 and 2 years after the zeolite addition. The results show that the zeolitic material considerably decreases the leaching of Cd, Co, Cu, Ni, and Zn. The sorption of metals in soil clay minerals (illite) proved to be the main cause contributing to the immobilization of these pollutants. This sorption could be a consequence of the rise in pH from 3.3 to 7.6 owing to the alkalinity of the zeolitic material added (caused by traces of free lime in the fly ash, or residual NaOH from synthesis).     

Mitigating construction safety risks using prevention through design

Introduction

Research and practice have demonstrated that decisions made prior to work at construction sites can influence construction worker safety. However, it has also been argued that most architects and design engineers possess neither the knowledge of construction safety nor the knowledge of construction processes necessary to effectively perform Construction Hazards Prevention through Design (CHPtD).

Method

This paper introduces a quantitative methodology that supports designers by providing a way to evaluate the safety-related performance of residential construction designs using a risk analysis-based approach. The methodology compares the overall safety risk level of various construction designs and ranks the significance of the various safety risks of each of these designs. The methodology also compares the absolute importance of a particular safety risk in various construction designs.

Results

Because the methodology identifies the relevance of each safety risk at a particular site prior to the construction stage, significant risks are highlighted in advance. Thus, a range of measures for mitigating safety risks can then be implemented during on-site construction.

Impact on industry

The methodology is specially worthwhile for designers, who can compare construction techniques and systems during the design phase and determine the corresponding level of safety risk without their creative talents being restricted. By using this methodology, construction companies can improve their on-site safety performance.     

鼋头渚不同年龄夜鹭卵中多氯联苯污染状况及分布特征

通过对太湖鼋头渚2000年采集的2龄、3龄和4龄夜鹭所产卵中15种多氯联苯同系物残留状况的研究,发现所有样品中均检出多氯联苯,残留量最高的为PCB₁₁₈,PCB₈₇,PCB₁₀₁和PCB₁₅₃,占PCBs残留量的75%～85%.含5～6个氯原子的同系物在夜鹭卵中的PCBs残留量明显高于其它类型的同系物.同时,多氯联苯残留量随亲鸟年龄增加而明显增加.4龄卵样分别比3龄、2龄卵样中PCBs残留量高出47.5%和60.9%.统计处理结果表明:多氯联苯残留总量与亲鸟年龄呈正相关(p=0.05).PCBs总量与亲鸟年龄呈正相关(p=0.05).与欧美日等国家同类研究结果中PCB₁₅₃残留量最高的情况略有不同,本研究在夜鹭卵中发现残留量最高的是PCB₁₁₈,占PCBs残留总量的30%左右,PCB₁₅₃含量仅为PCBs残留总量的17%左右.     

不同年龄夜鹭卵中有机氯农药污染的生物指示

通过对太湖鼋头渚 2 0 0 0年采集的二龄、三龄和四龄夜鹭卵以及相应年龄组夜鹭的捕食物中有机氯残留的检测 ,发现捕食物中HCH和DDT的平均残留量随年龄增加而增加 .除γ HCH外 ,其它 15种有机氯农药在卵样中均有检出 ,残留水平最高的为p ,p′ DDE ,占有机氯农药残留总量的 85 %以上 .β HCH是六六六类中持留性最强的组分 ,其残留量仅次于p ,p′ DDE .研究发现 ,p ,p DDT和 β HCH检出率为 10 0 % ,而其它类型农药只有很低的检出率 ,这与我国有机氯农药使用的历史情况相吻合 .随着亲鸟年龄增加 ,卵中 β HCH残留量有所提高 ,p ,p′ DDE残留量似有先升后稍降的趋势 .统计结果表明 :各年龄组有机氯残留量差异不明显 ,因此在用夜鹭卵作有机氯污染的生物指示时可以不考虑年龄差异所带来的影响 .     

Diastereoisomer- and enantiomer-specific determination of hexabromocyclododecane in fish oil for food and feed

Fish oils are one of the main sources of ω-3 fatty acids. However, they can present elevated levels of some lipophilic pollutants, such as hexabromocyclododecanes (HBCDs). Since data about HBCDs in fish oil samples are very limited, in this study, 25 samples of fish oil for feed and food have been analyzed. Total HBCDs, as well as, α-, β- and γ-diastereoisomers have been determined. Total HBCDs ranged from 0.09 to 26.8 ng g⁻¹, with higher concentrations in fish oil for feed (average value of 9.69 ng g⁻¹) than those for food (1.14 ng g⁻¹). Concentrations of α-HBCD (average value of 4.12 ng g⁻¹ in feed samples and 0.48 ng g⁻¹ in food samples) and γ-HBCD (5.05 and 0.43 ng g⁻¹ respectively) were higher than that of β-HBCD (0.52 and 0.19 ng g⁻¹ respectively) in most of the samples. However, none of them was predominant in the samples. Concentrations of HBCDs were compared to concentrations of other pollutants and correlation between dioxin and dioxin-like PCBs levels and HBCDs levels were observed. Intake of HBCDs was calculated for fish oil with human consumption purposes and it ranged from 0.08 to 5.38 ng HBCDs d⁻¹, which could contribute significantly to HBCDs total intake. Enantiomeric fractions were also determined. No clear enrichment was observed for γ-HBCD, while (−)-α-HBCD enrichment was detected in some samples.     

Fungal biofilters for toluene biofiltration: evaluation of the performance with four packing materials under different operating conditions

Packing materials play a key role in the performance of bioreactors for waste gas treatment and particularly in biofilter applications. In this work, the performance of four differently packed biofilters operated in parallel for the treatment of relatively high inlet concentration of toluene was studied. The reactors were compared for determining the suitability of coconut fiber, digested sludge compost from a waste water treatment plant, peat and pine leaves as packing materials for biofiltration of toluene. A deep characterisation of materials was carried out. Biological activity and packing capabilities related to toluene removal were determined throughout 240 days of operation under different conditions of nutrients addition and watering regime. Also, biofilters recovering after a short shutdown was investigated. Nutrient addition resulted in improved removal efficiencies (RE) and elimination capacities (EC) of biofilters reaching maximum ECs between 75 and 95 g m(-3)h(-1) of toluene. In the first 80 days, the pH decreased progressively within the reactors, causing a population change from bacteria to fungi, which were the predominant decontaminant microorganisms thereafter. All reactors were found to recover the RE rapidly after a 5 days shutdown and, in a maximum of 7 days, all reactors had been completely recuperated. These results point out that fungal biofilters are a suitable choice to treat high loads of toluene. In general, coconut fiber and compost biofilters exhibited a better performance in terms of elimination capacity and long-term stability.     

Environmental assessment of different advanced oxidation processes applied to a bleaching Kraft mill effluent

Basic research on remediation of polluted sediment by leaching has, to date, been carried out exclusively with suspended material. For economic reasons, only solid-bed leaching is applicable to large-scale processes. Abiotic and microbial solid-bed leaching were comparatively studied in a percolator system using ripened and therefore permeable heavy metal polluted river sediment. In the case of abiotic leaching, sulfuric acid was supplied to the sediment by circulating water; the lower the pH of the percolating water, the higher the percolation flow, and the lower the solid-bed height was, the faster the heavy metals were solubilized. However, the pH and percolation flow are subjected to restrictions: strongly acidic conditions result in dissolution of mineral components, and the percolation flow must not exceed the bed permeability. And a high solid bed is an economic requirement. In the case of bioleaching, elemental sulfur added to the sediment was oxidized to sulfuric acid within the package which, in turn, solubilized the heavy metals. Here, the percolation flow and the solid-bed height did not affect the rate of metal solubilization. Solid-bed leaching on a larger scale will thus be much more efficient applying bioleaching with sulfur as the leaching agent than abiotic leaching with sulfuric acid.