Analysis of micronucleated erythrocytes in heron nestlings from reference and impacted sites in the Ebro basin (N.E. Spain)

The frequency of micronuclei (MN) in peripheral erythrocytes was tested for 59 heron nestlings (Ardea purpurea, Egretta garzetta and Bubulcus ibis) sampled at two areas (polluted and reference) on the River Ebro (NE Spain) and at its Delta during Spring 2006. Flow-cytometry analysis revealed higher (three- to six-fold) MN counts in samples from the most polluted site relative to samples from the reference area. Samples from the Delta showed intermediate values. Age, morphometric parameters (weight, tarsus size and bill-head length) and maturation status showed no significant differences among the different populations for each species; nor were they correlated with MN levels. The data suggest that elevated levels of MN in chicks in impacted areas reflected the chemical pollution of their nesting sites. The use of nestlings for this assay appears to be a convenient, non-destructive method to assess the impact of pollution in natural bird populations.     

Mechanistics of trichloroethylene mineralization by the white-rot fungus Trametes versicolor

The white-rot fungus Trametes versicolor degraded trichloroethylene (TCE), a highly oxidized chloroethene, and produced 2,2,2-trichloroethanol and carbon dioxide as the main products of degradation, based on the results obtained using [13C]-TCE as the substrate. For a range of concentrations of TCE between 2 and 20 mg l(-1), 53% of the theoretical maximum chloride expected from complete degradation of TCE was observed. Laccase was shown to be induced by TCE, but did not appear to play a role in TCE degradation. Cytochrome P-450 appears to be involved in TCE degradation, as evidenced by marked inhibition of degradation of TCE in the presence of 1-aminobenzotriazole, a known inhibitor of cytochrome P-450. Our results suggested that chloral (trichloroacetaldehyde) was an intermediate of the TCE degradation pathway. The results indicate that the TCE degradation pathway in T. versicolor appears to be similar to that previously reported in mammals and is mechanistically quite different from bacterial TCE degradation.     

Metals and metalloid bioconcentrations in the tissues of Typha latifolia grown in the four interconnected ponds of a domestic landfill site

The uptake of metals in roots and their transfer to rhizomes and above-ground plant parts (stems, leaves) of cattails (Typha latifolia L.) were studied in leachates from a domestic landfill site (Etueffont, France) and treated in a natural lagooning system. Plant parts and corresponding water and sediment samples were taken at the inflow and outflow points of the four ponds at the beginning and at the end of the growing season. Concentrations of As, Cd, Cr, Cu, Fe, Mn, Ni and Zn in the different compartments were estimated and their removal efficiency assessed, reaching more than 90% for Fe, Mn and Ni in spring and fall as well in the water compartment. The above- and below-ground cattail biomass varied from 0.21 to 0.85, and 0.34 to 1.24 kg dry weight/m², respectively, the highest values being recorded in the fourth pond in spring 2011. The root system was the first site of accumulation before the rhizome, stem and leaves. The highest metal concentration was observed in roots from cattails growing at the inflow of the system''s first pond. The trend in the average trace element concentrations in the cattail plant organs can generally be expressed as: Fe > Mn > As > Zn > Cr > Cu > Ni > Cd for both spring and fall. While T. latifolia removes trace elements efficiently from landfill leachates, attention should also be paid to the negative effects of these elements on plant growth.     

Stabilization of FGD gypsum for its disposal in landfills using amorphous aluminium oxide as a fluoride retention additive

The applicability of amorphous aluminium oxide as a fluoride retention additive to flue gas desulphurisation (FGD) gypsum was studied as a way of stabilizing this by-product for its disposal in landfills. Using a batch method the sorption behaviour of amorphous aluminium oxide was evaluated at the pH (about 6.5) and background electrolyte conditions (high chloride and sulphate concentrations) found in FGD gypsum leachates. It was found that fluoride sorption on amorphous aluminium oxide was a very fast process with equilibrium attained within the first half an hour of interaction. The sorption process was well described by the Langmuir model, offering a maximum fluoride sorption capacity of 61.7 mg g(-1). Fluoride sorption was unaffected by chloride co-existing ions, while slightly decreased (about 20%) by competing sulphate ions. The use of amorphous aluminium oxide in the stabilization of FGD gypsum proved to greatly decreased its fluoride leachable content (in the range 5-75% for amorphous aluminium oxide doses of 0.1-2%, as determined by the European standard EN 12457-4 [EN-12457-4 Characterization of waste-leaching-compliance test for leaching of granular waste materials and sludges-Part 4: one stage batch test at a liquid to solid ratio of 10 l/kg for materials with particle size below 10mm (without or with size reduction)]), assuring the characterization of this by-product as a waste acceptable at landfills of non-hazardous wastes according to the Council Decision 2003/33/EC [Council Decision 2003/33/EC of 19 December 2002. Establishing criteria and procedures for the acceptance of waste at landfills pursuant to Article 16 of and Annex II to Directive 1999/31/EC] on landfill of wastes. Furthermore, as derived from column leaching studies, the proposed stabilization system proved to be highly effective in simulated conditions of disposal, displaying a fluoride leaching reduction value about 81% for an amorphous aluminium oxide added amount of 2%.     

Exploring the use of computer models in participatory integrated assessment – experiences and recommendations for further steps

Integrated assessment (IA) can be defined as a structured process of dealing with complex issues, using knowledge from various scientific disciplines and/or stakeholders, such that integrated insights are made available to decision makers (J. Rotmans, Enviromental Modelling and Assessment 3 (1998) 155). There is a growing recognition that the participation of stakeholders is a vital element of IA. However, only little is known about methodological requirements for such participatory IA and possible insights to be gained from these approaches. This paper summarizes some of the experiences gathered in the ULYSSES project, which aims at developing procedures that are able to bridge the gap between environmental science and democratic policy making for the issue of climate change. The discussion is based on a total of 52 IA focus groups with citizens, run in six European and one US city. In these groups, different computer models were used, ranging from complex and dynamic global models to simple accounting tools. The analysis in this paper focuses on the role of the computer models. The findings suggest that the computer models were successful at conveying to participants the temporal and spatial scale of climate change, the complexity of the system and the uncertainties in our understanding of it. However, most participants felt that the computer models were less instrumental for the exploration of policy options. Furthermore, both research teams and participants agreed that despite considerable efforts, most models were not sufficiently user-friendly and transparent for being accessed in an IA focus group. With that background, some methodological conclusions are drawn about the inclusion of the computer models in the deliberation process. Furthermore, some suggestions are made about how given models should be adapted and new ones developed in order to be helpful for participatory IA. This revised version was published online in July 2006 with corrections to the Cover Date.     

Persistence and effect of processing on reduction of fipronil and its metabolites in chilli pepper (Capsicum annum L.) fruits

A single laboratory UPLC-MS/MS method was developed and validated for the estimation of fipronil and its metabolites in fresh and dry chilli pepper fruits. Dissipation of fipronil on chilli fruits was studied following the application of fipronil (Jump 80 WG) at 40 and 80 g active ingredient (a.i.) ha^?1 in the fruiting stage of the crop. The initial deposits of total fipronil on fresh chilli fruits at single and double dose application were 0.69 and 1.43 μg g^?1, respectively, and were dissipated to below quantitation level at 27 days after application. The half-life of fipronil at single and double dose in fresh chilli pepper was 4.22 and 4.32 days and the waiting period was 25.9 and 30.6 days, respectively. Processing factor due to sun drying was calculated by measuring fipronil residues in dry chilli fruits, and it ranged from 2.96 to 3.50 during 0 to 21st day after application. Among the metabolites of fipronil, fipronil desulfenyl and fipronil sulfone had maximum residues in fresh and dried chilli, respectively, followed by fipronil sulfide. Dipping in solutions of tamarind, turmeric, vinegar and slaked lime and wet scrubbing could remove more than 90 % of fipronil residues in fruits.     

Chronic dietary exposure to pyrolytic and petrogenic mixtures of PAHs causes physiological disruption in zebrafish—part II: behavior

In the last 10 years, behavior assessment has been developed as an indicator of neurotoxicity and an integrated indicator of physiological disruption. Polycyclic aromatic hydrocarbon (PAH) release into the environment has increased in recent decades resulting in high concentrations of these compounds in the sediment of contaminated areas. We evaluated the behavioral consequences of long-term chronic exposure to PAHs, by exposing zebrafish to diets spiked with three PAH fractions at environmentally relevant concentrations. Fish were exposed to these chemicals from their first meal (5 days postfertilization) until they became reproducing adults (at 6 months old). The fractions used were representative of PAHs of pyrolytic (PY) origin and of two oils differing in composition (a heavy fuel oil (HO) and a light crude oil (LO)). Several tests were carried out to evaluate circadian spontaneous swimming activity, responses to a challenge (photomotor response), exploratory tendencies, and anxiety levels. We found that dietary PAH exposure was associated with greater mobility, lower levels of exploratory activity, and higher levels of anxiety, particularly in fish exposed to the HO fraction and, to a lesser extent, the LO fraction. Finally, our results indicate that PAH mixtures of different compositions, representative of situations encountered in the wild, can induce behavioral disruptions resulting in poorer fish performance.     

Developmental toxicity of PAH mixtures in fish early life stages. Part I: adverse effects in rainbow trout

A new gravel-contact assay using rainbow trout, Oncorhynchus mykiss, embryos was developed to assess the toxicity of polycyclic aromatic hydrocarbons (PAHs) and other hydrophobic compounds. Environmentally realistic exposure conditions were mimicked with a direct exposure of eyed rainbow trout embryos incubated onto chemical-spiked gravels until hatching at 10 °C. Several endpoints were recorded including survival, hatching delay, hatching success, biometry, developmental abnormalities, and DNA damage (comet and micronucleus assays). This bioassay was firstly tested with two model PAHs, fluoranthene and benzo[a]pyrene. Then, the method was applied to compare the toxicity of three PAH complex mixtures characterized by different PAH compositions: a pyrolytic extract from a PAH-contaminated sediment (Seine estuary, France) and two petrogenic extracts from Arabian Light and Erika oils, at two environmental concentrations, 3 and 10 μg g^?1 sum of PAHs. The degree and spectrum of toxicity were different according to the extract considered. Acute effects including embryo mortality and decreased hatching success were observed only for Erika oil extract. Arabian Light and pyrolytic extracts induced mainly sublethal effects including reduced larvae size and hemorrhages. Arabian Light and Erika extracts both induced repairable DNA damage as revealed by the comet assay versus the micronucleus assay. The concentration and proportion of methylphenanthrenes and methylanthracenes appeared to drive the toxicity of the three PAH fractions tested, featuring a toxic gradient as follows: pyrolytic?Arabian Light?Erika. The minimal concentration causing developmental defects was as low as 0.7 μg g^?1 sum of PAHs, indicating the high sensitivity of the assay and validating its use for toxicity assessment of particle-bound pollutants.     

Inhibition equivalency factors for microcystin variants in recombinant and wild-type protein phosphatase 1 and 2A assays

In this work, protein phosphatase inhibition assays (PPIAs) have been used to evaluate the performance of recombinant PP1 and recombinant and wild-type PP2As. The enzymes have been compared using microcystins-LR (MC-LR) as a model cyanotoxin. Whereas PP2A_Rec provides a limit of detection (LOD) of 3.1 μg/L, PP1_Rec and PP2A_Wild provide LODs of 0.6 and 0.5 μg/L, respectively, lower than the guideline value proposed by the World Health Organization (1 μg/L). The inhibitory potencies of seven MC variants (-LR, -RR, -dmLR, -YR, -LY, -LW and -LF) have been evaluated, resulting on 50 % inhibition coefficient (IC₅₀) values ranging from 1.4 to 359.3 μg/L depending on the MC variant and the PP. The PPIAs have been applied to the determination of MC equivalent contents in a natural cyanobacterial bloom and an artificially contaminated sample, with multi-MC profiles. The inhibition equivalency factors (IEFs) have been applied to the individual MC quantifications determined by liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis, and the estimated MC-LR equivalent content has been compared to PPIA results. PPIAs have demonstrated to be applicable as MC screening tools for environmental applications and to protect human and animal health.     

Mobility and phytoavailability of Cu,Cr, Zn,and As in a contaminated soil at a wood preservation site after 4 years of aided phytostabilization

The remediation of copper-contaminated soils by aided phytostabilisation in 16 field plots at a wood preservation site was investigated. The mobility and bioavailability of four potentially toxic trace elements (PTTE), i.e., Cu, Zn, Cr, and As, were investigated in these soils 4 years after the incorporation of compost (OM, 5 % w/w) and dolomite limestone (DL, 0.2 % w/w), singly and in combination (OMDL), and the transplantation of mycorrhizal poplar and willows. Topsoil samples were collected in all field plots and potted in the laboratory. Total PTTE concentrations were determined in soil pore water (SPW) collected by Rhizon soil moisture samplers. Soil exposure intensity was assessed by Chelex100-DGT (diffusive gradient in thin films) probes. The PTTE phytoavailability was characterized by growing dwarf beans on potted soils and analyzing their foliar PTTE concentrations. OM and DL, singly and in combination (OMDL), were effective to decrease foliar Cu, Cr, Zn, and As concentrations of beans, the lowest values being numerically for the OM plants. The soil treatments did not reduce the Cu and Zn mineral masses of the bean primary leaves, but those of Cr and As decreased for the OM and DL plants. The Cu concentration in SPW was increased in the OM soil and remained unchanged in the DL and OMDL soils. The available Cu measured by DGT used to assess the soil exposure intensity correlated with the foliar Cu concentration. The Zn concentrations in SPW were reduced in the DL soil. All amendments increased As in the SPW. Based on DGT data, Cu availability was reduced in both OM and OMDL soils, while DL was the most effective to decrease soil Zn availability.