模型池塘生态系统设计与应用研究

报道了三种模型池塘生态系统即池塘微宇宙、池塘中宇宙和模型水陆生态系统的设计、组建与应用研究结果。三种模型生态系统分别由水族箱（６０×３０×４０）ｃｍ３、玻璃钢水槽（３×１×１）ｍ３和水泥池（２×２×０．６）ｍ３组成，铺垫一定量含有水生生物种子、孢子及卵子的干河泥，灌注自来水。起始氮、磷浓度按中富营养水平配置。培育约一个月，即可分别长成典型的沉水植物群落和沿岸植物群落，并可维持达数月。冬季水槽排干，第二年注水培养，生物群落可重新发展。该系统可连续使用数年。单甲脒农药影响实验结果表明，三种模型生态系统反应均灵敏，可以作为评价、预测化学污染物直接或经地表径流进入水体引起整体生态效应的良好工具。     

UV/H2O2/Fe-FeOxH2x-3和UV/H2O2工艺降解水中富里酸的研究

采用硼氢化钠还原法制备核-壳结构的Fe-FeO_xH_2x-3复合材料，研究了富里酸在UV/H₂O₂和UV/H₂O₂/Fe-FeO_xH_2x-3两种不同反应体系下的降解情况。结果表明，核-壳结构Fe-FeO_xH_2x-3的存在，提高了UV/H₂O₂降解富里酸的反应速率，TOC去除达到84%。采用XAD树脂吸附法对反应前后的富里酸进行化学分级表征，结果表明，富里酸经反应后憎水酸（HoA）、弱憎水酸（WHoA）和憎水中性物质（HoN）都有所减少，进而转化为亲水性物质（HiM）；用超滤膜法对富里酸进行物理分级表征，考察了富里酸在反应前后分子量分布的变化情况。同时，富里酸经过反应后生成的中间产物降低了三氯甲烷生成趋势。     

Estimation and characterization of PCDD/Fs, dl-PCBs, PCNs, HxCBz and PeCBz emissions from magnesium metallurgy facilities in China

Magnesium production is considered to be one potential source of unintentional persistent organic pollutants (unintentional POPs). However, studies on the emissions of unintentional POPs from magnesium metallurgy are still lacking. Emissions of unintentional POPs, such as polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDD/Fs), dioxin-like polychlorinated biphenyls (dl-PCBs), polychlorinated naphthalenes (PCNs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz) are covered under the Stockholm Convention. In this study, these emissions were investigated through a magnesium smelting process. Stack gas and fly ash samples from a typical magnesium plant in China were collected and analyzed to estimate the emissions of unintentional POPs from magnesium metallurgy. Emissions factors of 412 ng TEQ t⁻¹ for PCDD/Fs, 18.6 ng TEQ t⁻¹ for dl-PCBs, 3329 μg t⁻¹ for PCNs, 820 μg t⁻¹ for HxCBz, and 1326 μg t⁻¹ for PeCBz were obtained in 2009. Annual emissions from magnesium metallurgy in China were estimated to be 0.46 g WHO-TEQ for PCDD/Fs and dl-PCBs, 1651 g for PCNs, 403 g for HxCBz and 653 g for PeCBz, respectively.     

Effect of loading rate on shear strength parameters of mechanically and biologically treated waste

● Mechanical behavior of MBT waste affected by loading rate was investigated. ● Shear strength ratio of MBT waste increases with an increase in loading rate. ● Cohesion is inversely related to loading rate. ● Internal friction angles are positively related to loading rate. ● MBT waste from China shows smaller range of φ. Mechanical biological treatment (MBT) technology has attracted increasing attention because it can reduce the volume of waste produced. To deal with the current trend of increasing waste, MBT practices are being adopted to address waste generated in developing urban societies. In this study, a total of 20 specimens of consolidated undrained triaxial tests were conducted on waste obtained from the Hangzhou Tianziling landfill, China, to evaluate the effect of loading rate on the shear strength parameters of MBT waste. The MBT waste samples exhibited an evident strain-hardening behavior, and no peak was observed even when the axial strain exceeded 25%. Further, the shear strength increased with an increase in the loading rate; the effect of loading rate on shear strength under a low confining pressure was greater than that under a high confining pressure. Furthermore, the shear strength parameters of MBT waste were related to the loading rate. The relationship between the cohesion, internal friction angle, and logarithm of the loading rate could be fitted to a linear relationship, which was established in this study. Finally, the ranges of shear strength parameters cohesion c and effective cohesion c ´ were determined as 1.0–8.2 kPa and 2.1–14.9 kPa, respectively; the ranges of the internal friction angle φ and effective internal friction angle φ ´ were determined as 16.2°–29° and 19.8°–43.9°, respectively. These results could be used as a valuable reference for conducting stability analyses of MBT landfills.     

Response of organic aerosol characteristics to emission reduction in Yangtze River Delta region

● The emission reduction causes significant change in organic aerosol composition. ● The atmospheric oxidizing capacity improved during emission reduction. ● The mixed oxygenated organic aerosol contributed higher during emission reduction. Organic aerosol (OA) is a major component of atmospheric particulate matter (PM) with complex composition and formation processes influenced by various factors. Emission reduction can alter both precursors and oxidants which further affects secondary OA formation. Here we provide an observational analysis of secondary OA (SOA) variation properties in Yangtze River Delta (YRD) of eastern China in response to large scale of emission reduction during Chinese New Year (CNY) holidays from 2015 to 2020, and the COVID-19 pandemic period from January to March, 2020. We found a 17% increase of SOA proportion during the COVID lockdown. The relative enrichment of SOA is also found during multi-year CNY holidays with dramatic reduction of anthropogenic emissions. Two types of oxygenated OA (OOA) influenced by mixed emissions and SOA formation were found to be the dominant components during the lockdown in YRD region. Our results highlight that these emission-reduction-induced changes in organic aerosol need to be considered in the future to optimize air pollution control measures.     

Assessment of the temporal and spatial distribution of atmospheric PCNs and their air–soil exchange using passive air samplers in Shanghai,East China

A total of 47 passive air samples and 25 soil samples were collected to study the temporal trend, distribution, and air–soil exchange of polychlorinated naphthalenes (PCNs) in Shanghai, China. Atmospheric PCNs ranged from 3.44 to 44.1 pg/m³ (average of 21.9 pg/m³) in summer and 13.6 to 153 pg/m³ (average of 40.0 pg/m³) in winter. In the soil samples, PCN concentrations were 54.7–1382 pg/g dry weight (average of 319 pg/g). Tri-CNs and tetra-CNs were two dominant homolog groups in air samples, while di-CNs were also found at comparable proportions to tri-CNs and tetra-CNs in soil samples. Most air and soil samples from the industrial and urban areas showed higher PCN concentrations than those from suburban areas. However, some soil samples in urban centers presented higher PCN concentrations than industrial areas. Analysis of PCN sources indicated that both industrial thermal process and historical usage of commercial PCN mixtures contributed to the PCN burden in most areas. The fugacity fraction results indicated a strong tendency of volatilization for lighter PCNs (tri- to hexa-CNs) in both seasons, and air–soil deposition for octa-CNs. Moreover, air–soil exchange fluxes indicate that soil was an important source of atmospheric PCNs in some areas. The results of this study provide information for use in the evaluation of the potential impact and human health risk of PCNs around the study areas.

     

Exposure to fine particulate matter induces self-recovery and susceptibility of oxidative stress and inflammation in rat lungs

Environmental Science and Pollution Research - PM2.5 induces pulmonary inflammation via oxidative stress, and this role in the lungs is widely accepted, but studies on whether oxidative stress and...     

RAM分析技术在海上油气处理系统中的应用

针对海上油气处理系统在恶劣的作业环境下可靠性低的特点,采用RAM分析技术对某海上石油平台油气处理系统进行可靠性和可用度分析,建立可靠性数学模型,用可靠性分析的算法计算出系统主要设备的可靠性值和系统在寿命周期内可用度变化趋势。应用结果表明:运用RAM分析技术能够计算出寿命周期内油气处理系统的可用度分布规律以及辨识出系统薄弱环节,为提高油气处理系统的可靠性以及改进系统配置等方面提供措施及建议。