阿卡波糖生产废水的光催化降解工艺研究

在实验室用溶胶-凝胶法合成一种复合光催化剂,以难生化降解的阿卡波糖废水作为降解对象,研究经光催化降解后的废水,对后续生化装置的影响。     

Short-term prediction of urban PM2.5 based on a hybrid modified variational mode decomposition and support vector regression model

Environmental Science and Pollution Research - PM2.5 (particulate matter with a size/diameter ≤ 2.5 μm) is an important air pollutant that affects human health, especially...     

Violence‐prevention climate,exposure to violence and aggression,and prevention behavior: A mediation model

This study explored mechanisms underlying employees' behaviors targeted at preventing workplace physical violence and verbal aggression. Poor psychological violence‐prevention climate perceptions and previous exposure to violence and aggression represent stressors that were associated with increased strains and reduced motivation. Strains and motivation, in turn, were related to prevention behaviors. We collected data from employee and coworker dyads, and structural equation modeling results supported that clear organizational policies, prompt management responses to assaults, and putting safety as a priority contributed positively to prevention behaviors through reduced strains and increased motivation. On the other hand, prior experiences of being attacked were related to more strains and lower motivation, which were related to lower prevention compliance. Our results inform future interventions for violence prevention. Copyright © 2011 John Wiley & Sons, Ltd.     

Feasibility study on high-temperature sorption of hydrogen sulfide by natural soils

In this study, seven natural soils were tested for the sorption of hydrogen sulfide from coal gasification gas at high temperature. Results indicate that the LP natural soil has the best performance and the highest sulfur sorption capacity. After extracting free iron oxides, most natural soils have no sorption efficiency. The free iron oxides, therefore, proved to be the major components that react with hydrogen sulfide to form iron sulfides. The sulfur sorption capacity, either determined by EA or breakthrough time, is very close to the theoretical value based on the stoichiometric calculation with the content of free iron oxides. Moreover, the presence of CO is a positive effect while H2 is a negative effect. This can be explained via the water-shift reaction. On the basis of the results of temperature-programmed sulfidation (TPS), the starting temperature for the sorption of hydrogen sulfide is between 623-673 K. From the analyses of temperature-programmed oxidation (TPO) and XPS, the iron polysulfides are the major products and approximately 90% regeneration efficiency can be theoretically achieved while the temperature is controlled higher than 813 K. In the regeneration tests, the results show that the LP natural soil can be regenerated and thus reused after the oxidation process. No significant degeneration occurs on the LP natural soil after five sorption/regeneration cycles. The sulfur sorption capacity of the tenth regenerated soil can be achieved at least 80% compared to the fresh one. The experimental analyzed SO2 concentration from the regeneration process is almost identical to the theoretical calculated equilibrium concentration of the process. Maghemite is the main product after the regeneration process.     

Instabilities in non-rotating and rotating shallow shear flows

Numerical simulations for the wave radiation effect on the linear and nonlinear instabilities of rotating and non-rotating shallow flows are conducted using shallow-water equations. At a low convective Froude number, the results of the instabilities is a string of eddies. The coalescence between the neighbouring eddies decides the transverse mixing of the shallow shear flow. At a higher convective Froude number, the development of the shear flow is characterized by wave radiation and the production of shocklets. The radiation of waves in the non-rotating shallow flow is a phenomenon analogous to the radiation of sound in gas dynamics. In the rotating flow on the other hand, the shallow-flow instabilities are intensified due to rotational interference within a window of instability over a narrow range of Rossby numbers.     

Health risk of aerosols and toxic metals from incense and joss paper burning

We report for the first time the distribution and hazard potential of aerosol and metals resulting from joss paper burning. Burning joss paper and incense is a traditional custom in many Oriental countries. Large amounts of air pollutants, including particles, polycyclic aromatic hydrocarbons, toxic metals and other gaseous pollutants, are released into the environment during the burning stage. Many investigations have reported on the emission of pollutants from the incense burning. However, no work has been reported until now on the analysis of the released pollutants apart from polycyclic aromatic hydrocarbons. In this study, a micro-orifice uniform-deposit impactor and inductively coupled plasma optical emission spectrometry were, respectively, used to collect aerosols and characterize the toxic metals from joss paper burning. We studied two types of particulate matter (PM): PM_2.5 that are particles with a diameter smaller than 2.5 μm and PM₁₀ that are particles with a diameter smaller than 10 μm. PM_2.5 are the most potentially toxic particles. Our results showed that PM_2.5 are the major component of the pollutants and that the PM_2.5 to PM₁₀ ratio ranged from 62 to 99%. The metals Na, Ca, Mg, Al and K were the main species in the aerosol and in the bottom ash.     

Hygroscopicity of particles generated from photooxidation of α-pinene under different oxidation conditions in the presence of sulfate seed aerosols

Smog chamber experiments were conducted to investigate the hygroscopicity of particles generated from photooxidation of α-pinene/NOx with different sulfate seed aerosols or oxidation conditions. Hygroscopicity of particles was measured by a tandem differential mobility analyzer （TDMA） in terms of hygroscopic growth factor （Gf）, with a relative humidity of 85%. With sulfate seed aerosols present, Gf of the aerosols decreased very fast before notable secondary organic aerosols （SOA） formation was observed, indicating a heterogeneous process between inorganic seeds and organic products might take place as soon as oxidation begins, rather than only happening after gas-aerosol partition of organic products starts. The final SOA-coated sulfate particles had similar or lower Gf than seed-free SOA. The hygroscopicity of the final particles was not dependent on the thickness but on the hygroscopicity properties of the SOA, which were influenced by the initial sulfate seed particles. In the two designed aging processes, Gf of the particles increased more significantly with introduction of OH radical than with ozone. However, the hygroscopicity of SOA was very low even after a long time of aging, implying that either SOA aging in the chamber was very slow or the Gf of SOA did not change significantly in aging. Using an aerosol composition speciation monitor （ACSM） and matrix factorization （PMF） method, two factors for the components of SOA were identified, but the correlation between SOA hygroscopicity and the proportion of the more highly oxidized factor could be either positive or negative depending on the speciation of seed aerosols present.     

氢化锆对太安空中爆炸及热安全性能影响的研究*

为研究氢化锆对太安空中爆炸及热安全性的影响,分别对氢化锆/太安混合炸药（ZrH2/PETN）和太安单质炸药开展空中爆炸实验和热分析实验,得到相应的压力时程曲线和TG、DSC热分解曲线。研究结果表明:氢化锆的添加会降低混合炸药的压力峰值,但能显著提高其正相作用时间,氢化锆含量为10%、20%时,氢化锆/太安混合炸药的正相冲量与太安相当。同时与纯太安相比,氢化锆/太安混合组分的最大质量损失速率下降约51.07%~60.04%,热爆炸临界温度及自加速分解温度最大提高约8.78%和9.93%,但混合组分中氢化锆的加入并未改变太安的热分解机理,说明氢化锆作为惰性热稀释剂能够改善其热安全性。     

Phthalic acid esters (PAEs) in workplace and house dust from Vietnam: concentrations,profiles, emission sources,and exposure risk

Environmental Science and Pollution Research - The occurrence of nine phthalic acid esters (PAEs) were determined in indoor dust samples collected from vehicle repair shops, waste processing...     

Inactivation and subsequent reactivation of Aspergillus species by the combination of UV and monochloramine: Comparisons with UV/chlorine

Ultraviolet (UV)/monochloramine (NH₂Cl) as an advanced oxidation process was firstly applied for Aspergillus spores inactivation. This study aims to: i) clarify the inactivation and photoreactivation characteristics of UV/NH₂Cl process, ii) compared with UV/Cl₂ in inactivation efficiency, photoreactivation and energy consumption. The results illustrated that UV/NH₂Cl showed better inactivation efficiency than that of UV alone and UV/Cl₂, and could effectively control the photoreactivation. For instance, the inactivation rates for Aspergillus flavus, Aspergillus niger and Aspergillus fumigatus in the processes of UV/NH₂Cl (2.0 mg/L) was 0.034, 0.030 and 0.061 cm²/mJ, respectively, which were higher than that of UV alone (0.027, 0.026 and 0.024 cm²/mJ) and UV/Cl₂ (0.023, 0.026 and 0.031 cm²/mJ). However, there was no synergistic effect for Aspergillus flavus and Aspergillus fumigatus. As for Aspergillus niger, the best synergistic effect can reach 1.86-log₁₀. This may be due to their different resistance to disinfectants, which were related to the size, an outer layer of rodlets (hydrophobins) and pigments. After UV/NH₂Cl inactivation, the degree of cell membrane damage and intracellular reactive oxygen species were higher than that of UV alone. UV/NH₂Cl had the advantages of high inactivation efficiency and inhibition of photoreactivation, which provides a new entry point for the disinfection of waterborne fungi.