长白山西坡风灾干扰区的恢复和保护

长白山西坡发生的灾害性风灾干扰,一方面给长白山自然保护区的森林资源造成巨大损失,同时也提出了如何加强保护和加速恢复的新课题。文中分析了风灾干扰区的更新格局和过程以及干扰后处理的有关问题,提出了从立地和景观水平促进更新恢复的保护措施     

染化废水厌氧生物处理技术的研究

鉴于厌氧微生物对偶氮染料的还原裂解作用，开发了以易降解工业有机废水作为外加碳源的染化废水厌氧生物处理的新技术．试验结果表明：在进水ＣＯＤ３１００—３５００ｍｇ／Ｌ，ＣＯＤ总／ＣＯＤ染化比值４０，ＨＲＴ３．０ｄ下，ＣＯＤ去除率＞８０％，最低染化ＣＯＤ去除率＞４５％，色度去除率＞８５％；实验证实，在厌氧处理过程中，染料组分的结构已发生了明显的变化；反应器内的污泥大多呈颗粒状；污泥活性和工艺性能可控制工艺运行参数得以维持．     

Evaluation of combined developmental neurological toxicity of di (n-butyl) phthalates and lead using immature mice

Environmental Science and Pollution Research - In this study, the immature mice were taken to assess the potential neurological toxicity of lead (Pb) and di (n-butyl) phthalates (DBP) combination...     

Does Administrative Division Adjustment promote low-carbon city development? Empirical evidence from the “Revoke County to Urban District” in China

Environmental Science and Pollution Research - The carbon emission reduction in city regions as a result of the optimization of urban spatial layout is crucial for combating global warming and has...     

流化床焚烧含盐苯胺废液的NOx排放特性

在流化床焚烧实验装置上进行含盐苯胺(C6H5NH2)废液的焚烧实验研究,用IMR-IMR2800P废气分析仪对焚烧尾气成分进行了在线监测,考察了焚烧工艺条件对NOx排放浓度的影响规律.结果显示:采用分级燃烧工艺和提高焚烧温度,可以降低NOx浓度;增大进料速率却导致NOx排放浓度的增加.当过剩空气系数(α)低于1.0时,NOx排放浓度随着α的增大急剧上升;大于1.1时,NOx排放浓度随α增加而减小.苯胺废液高温焚烧时添加氯化钠能降低NOx排放.     

基于生命周期的产品碳足迹评价与核算分析

近年来,越来越多的企业对其产品进行碳足迹评价,评价方法主要采用产品碳足迹评价标准提供的碳计量方程,如GHG Protocol、ISO14064、PAS 2050、TS Q 0010等。在介绍相关评价标准的基础上,分析了产品碳足迹的评价步骤,最后利用河北盛华化工有限公司生产的PVC产品为例,给出了基于生命周期的B2B模式的产品碳足迹评价的案例。为企业及相关机构开展碳足迹评价提供借鉴作用。     

长大区间隧道抽出式串联通风机排烟能力实验研究

为实现有效通风以降低隧道火灾带来的损失和伤亡,依托青岛市地铁8号线大洋站至青岛北站区间隧道,建立线性比尺为1∶15的隧道通风排烟模型实验系统,针对通风机串联单抽,围绕3种通风机频率匹配组合,测定单机的变频频率值、电功消耗、排烟道与行车道的断面平均风速以及右侧行车道静压。研究结果表明：在相同功率消耗下,不同频率匹配的串联通风机排烟效果存在差异;针对此差异,利用气体挡烟墙性能及其计算欧拉数值比较发现,风井近端的通风机频率较大时,下游对污染气流的抵抗力更强,拥有更好的排烟效果。研究结果可为隧道火灾提供更有效率的防灾救灾数据支持,并从欧拉数方面为研究隧道临界风速提供新角度。     

Distribution,source, and environmental risk assessment of phthalate esters (PAEs) in water,suspended particulate matter,and sediment of a typical Yangtze River Delta City,China

Phthalates (PAEs) in drinking water sources such as the Yangtze River in developing countries had aroused widespread concern. Here, the water, suspended particulate matter (SPM), and sediment samples were collected from 15 sites in wet and dry seasons in Zhenjiang, for the determination of six PAEs (DMP, DEP, DIBP, DBP, DEHP, and DOP) using the solid-phase extraction (SPE) or ultrasonic extraction coupled with gas chromatography-mass spectrometry (GC-MS). The total concentrations of six PAEs (Σ₆PAEs) spanned a range of 2.65–39.31 μg L^?1 in water, 1.97–34.10 μg g^?1 in SPM, and 0.93–34.70 μg g^?1 in sediment. The partition coefficients (K_d1) of PAEs in water and SPM phase ranged from 0.004 to 3.36 L g^?1 in the wet season and from 0.12 to 2.84 L g^?1 in the dry season. K_d2 of PAEs in water and sediment phase was 0.001–9.75 L g^?1 in the wet season and 0.006–8.05 L g^?1 in the dry season. The dominant PAEs were DIBP, DBP, and DEHP in water and SPM, DIBP, DEHP, and DOP in sediment. The concentration of DBP in water exceeded the China Surface Water Standard. The discharge of domestic sewage and industrial wastewater might be the main potential sources of PAEs. The risk quotient (RQ) method used for the risk assessment revealed that DBP (0.01 < RQ < 1) posed a medium risk, while DIBP and DEHP (RQ > 1) posed a high environmental risk in water, DIBP (RQ > 1) also showed a high risk in sediment.

     

Probing the distribution and contamination levels of 10 trace metal/metalloids in soils near a Pb/Zn smelter in Middle China

The horizontal and vertical distribution patterns and contamination status of ten trace metal/metalloids (Ag, Bi, Co, Cr, Ge, In, Ni, Sb, Sn, Tl) in soils around one of the largest Chinese Pb–Zn smelter in Zhuzhou City, Central China, were revealed. Different soil samples were collected from 11 areas, including ten agricultural areas and one city park area, with a total of 83 surface soil samples and six soil cores obtained. Trace metal/metalloids were determined by inductively coupled plasma–mass spectrometry after digestion by an acid mixture of HF and HNO₃. The results showed that Ag, Bi, In, Sb, Sn, and Tl contents decreased both with the distance to the Pb–Zn smelter as well as the soil depth, hinting that these elements were mainly originated from the Pb–Zn smelting operations and were introduced into soils through atmospheric deposition. Soil Ge was influenced by the smelter at a less extent, while the distributions of Co, Cr, and Ni were roughly even among most sampling sites and soil depths, suggesting that they were primarily derived from natural sources. The contamination status, as revealed by the geo-accumulation index (I _geo), indicated that In and Ag were the most enriched elements, followed by Sb, Bi, and Sn. In general, Cr, Tl, Co, Ni, and Ge were of an uncontaminated status.     

Medium optimization for the production of anti-cyanobacterial substances by Streptomyces sp. HJC-D1 using response surface methodology

Bioremediation using isolated anti-cyanobacterial microorganism has been widely applied in harmful algal blooms (HABs) control. In order to improve the secretion of activated anti-cyanobacterial substances, and lower the cost, a sequential optimization of the culture medium based on statistical design was employed for enhancing the anti-cyanobacterial substances production and chlorophyll a (Chl a) removal by Streptomyces sp. HJC-D1 in the paper. Sucrose and KNO₃ were selected as the most suitable carbon and nitrogen sources based on the one-at-a-time strategy method, and sucrose, KNO₃ and initial pH were found as major factors that affected the anti-cyanobacterial ability of the isolated stain via the Plackett–Burman design. Based on the response surface and canonical analysis, the optimum condition of culture medium was obtained at 22.73 g l^-1 of sucrose, 0.96 g l^-1 of KNO₃, and initial pH 8.82, and the Chl a removal efficiency by strain HJC-D1 increased from 63?±?2 % to 78?±?2 % on the optimum conditions.