Larrea tridentata叶片解剖结构与保水特性的研究

为了解L.tridentata叶片在解剖学方面适应干旱的特征以及叶片的保水特性,采用石蜡切片法观察L.tridentata叶片的解剖结构,同时测定叶片保水曲线。结果显示：L.tridentata叶片厚233.6μm,表皮细胞大,具有较厚的表皮细胞外壁与角质层,上表皮外壁与角质层总厚度为23.7μm;栅栏组织发达,在叶片中占55%,细胞细长,排列紧密。从叶片保水曲线上看,L.tridentata叶片从失水到基本恒重的时间为120 h左右,显示其叶片抗脱水能力强。     

地铁隧道排烟口无量纲结构参数与局部阻力研究*

针对现有行业规范中的排烟口结构参数尚不明确的问题,依托过海瓦贵区间隧道,搭建隧道通风排烟模型实验系统。设定11种排烟口面积工况,结合实验与数值模拟,得到排烟口上、下游的静压值和风速。引入动能修正系数,推导出基于上下游能量差的排烟口局部阻力表达式,绘制出无量纲面积比与局部阻力系数曲线族。研究结果表明:排烟口长宽比值较大时,不利于排烟口下方风流流动;在同一风机组合工况下,当排烟口面积缩小时,局部阻力系数会呈现出先减后增的趋势;提出排烟口最优结构长宽比为1.06。研究结果可为相关规范制定提供参考,并为防灾救灾提供理论支持。     

Neurological effects of subchronic exposure to dioctyl phthalate (DOP), lead,and arsenic,individual and mixtures,in immature mice

Environmental Science and Pollution Research - Dioctyl phthalate (DOP) (200, 500, and 1000 mg kg?1 bw, i.g.), Pb (Ac)2 (50 mg L?1, p.o.), and NaAsO2 (10 mg L?1, p.o.) were...     

序批式气提生物反应器(SABR)处理氯苯胺类有机废水好氧污泥颗粒化研究

研究了序批式气提生物反应器(SABR)处理氯苯胺类(CAs)有机废水过程中好氧污泥的颗粒化.SABR运行15d后,反应器内出现细小污泥颗粒,通过缩短循环时间与污泥沉降时间,并逐步提高COD与CAs进水负荷,SABR运行48d后污泥颗粒化明显;反应器在循环时间为12h、污泥沉降时间为6min、表面气速为2.4cm.s-1、COD负荷为1.0~3.6kg.m-3.d-1、CAs负荷逐步提升至800g.m-3.d-1的条件下继续运行50d,SABR污泥颗粒化趋于成熟,COD、CAs去除率稳定在90%、99.9%以上.根据污泥形态、最小沉降速率、SVI和目标污染物降解性能的变化,好氧污泥颗粒化过程可分为启动期、颗粒污泥形成期、生长期和成熟期.成熟好氧颗粒污泥粒径为0.9~2.5mm,平均颗粒密度为64g.L-1(以MLVSS计),污泥最小沉降速率为68.4m.h-1,SOUR为167mg.g-1.h-1;颗粒污泥外形为圆形或椭圆形,呈橙黄色,结构较致密,颗粒内外分布有丰富的类球菌、类短杆菌,与胞外多聚物交织共存.     

厌氧附着膜膨胀床(AAFEB)反应器稳态运行的过程动力学

从AAFEB反应器运行工况特点和全混合活性污泥动力学的理论出发,建立了AAFEB反应器稳态运行的过程动力学模型。并作了动力学模型参数估值、灵敏度分析,模型检验,以及运行参数影响的动力学模拟.     

厌氧颗粒污泥反应器修复模拟受PCP污染地表水的性能研究

研究了用于修复模拟受ＰＣＰ污染地表水的厌氧颗粒污泥反应器降解ＰＣＰ活性的维持条件和修复性能．结果表明，降解ＰＣＰ活性可通过连续提供电子供体和选择压力来维持，操作条件为ＣＯＤ进水／ＰＣＰ进水＞３０，此时反应器具有稳定的ＰＣＰ去除和产甲烷性能；颗粒污泥反应器修复受ＰＣＰ污染地表水的性能与过程稳定性受电子供体类型、数量的影响．当ＣＯＤ／ＰＣＰ＞１５０—２００，ＨＲＴ为０５ｄ时，含ＰＣＰ１２９１ｍｇ／Ｌ的模拟受污地表水经厌氧反应器修复后，其ＰＣＰ浓度可低于１ＰＰｂ，生物毒性明显降低．     

厌氧处理含氯酚废水的颗粒污泥形成过程研究

在选择适宜的接种污泥前提下，即使有毒物五氯酚 存在，也完全可以使氯酚驯化污泥在模拟上流式厌氧消化反应器的启动、运行过程中颗粒化，形成降解并矿化ＰＣＰ的颗粒污泥，反应器运行性能随污泥颗粒化进程而逐步得到改善；分析了反应器内不同高度的颗粒污泥中不同营养类群细菌的数量垂直变化规律，并通过光学，电子显微镜观察了颗粒污泥的表面结构和主要微生物形态，发现丝状菌和杆菌是该颗粒污泥的优势菌。     

Multi-scale spatial determinants of dissolved oxygen and nutrients in Qiantang River, China

This study employed spatial regression to analyze the determinants of dissolved oxygen (DO) and nutrients in the Qiantang River, China. Determinants of their spatial patterns in 1996 and 2003 as well as their dynamics during this time period were characterized at sub-basin and 500-m riparian buffer scales. Results indicated that the determinants differed by variable and by scale. Built-ups, farmland, water body, population density and gross domestic product were positive indicators for nutrient pollution and hypoxia, while distance to river source and forest were negative indicators. Higher slope variability indicates more DO and nutrients. In addition, built-up increases that were accelerated by population growth and economic development accounted for DO and nutrients dynamics to a large extent. This study highlighted that incorporation of spatial autocorrelation into regression was not only a methodological advantage but also a promising management tool.     

Environmental contamination of heavy metals from zinc smelting areas in Hezhang County, western Guizhou, China

Total heavy metal (Cd, Cr, Cu, Pb and Zn) concentrations were evaluated in smelting waste, soil, crop and moss samples collected from the Hezhang artisanal zinc smelting areas, Guizhou, China. Soil samples from the cornfield near the smelting sites contained extremely high Cd (5.8-74 mg kg(-1)), Pb (60-14,000 mg kg(-1)) and Zn (260-16,000 mg kg(-1)) concentrations. Elevated heavy metal concentrations were also found in corn plants and total Pb (0.80-1.5 mg kg(-1)) and Cd (0.05-0.76 mg kg(-1)) concentrations in corn grain have totally or partially exceeded the national guidance limits for foodstuff. Thus, the soil-to-crop transfer of heavy metals might pose a potential health risk to the local residents. Similar to the high heavy metal levels in soil and corn, Cd, Cr, Cu, Pb and Zn concentrations in moss samples collected from the smelting sites ranged from 10 to 110, 10 to 55, 26 to 51, 400 to 1200 and 330 to 1100 mg kg(-1), respectively, exhibiting a local spatial pattern of metals deposition from the atmosphere. Based on examination of Zn/Cd and Pb/Cd ratios of the analyzed samples, we have distinguished between the flue gas dust derived and smelting waste derived metals in different environmental compartments.     

塑料电除雾器的特性与安全运行对策

介绍了塑料电除雾器性能与构造特点 ,分析了硫酸雾的成因及规律 ,针对塑料电除雾器运行中可能出现的故障提出了保证其高效运行的措施