钢渣处理技术的环境性能比较

随着钢铁工业的快速发展,大量钢渣弃置堆积,不仅成为环境污染源,而且占用大量的土地。目前钢渣处理技术较多,其中主要的处理方法有冷弃法、热闷法、热泼法、浅盘法、水淬法、风淬法等。本研究采用生命周期评价方法,对主要钢渣处理技术进行评估,定义了生命周期评估边界和清单指标,建立了清单计算模型,得到了不同钢渣处理技术的生命周期清单。为了提高结果的可信性,对模型进行了不确定性分析。结果表明滚筒法和风淬法的环境性能较好,是值得推广的钢渣处理技术。     

四川某中小城镇污水处理厂进水水质统计分析

生活污水水质对处理工艺的选择、设计参数的选取以及稳定运行十分重要。运用SPSS软件,对四川某中小城镇污水处理厂为期一年的进水指标(水量、COD、氨氮、总磷、pH、SS)进行方差和相关性分析。方差分析结果显示进水量、氨氮和SS在月份和季节之间存在显著性差异,而总磷和pH仅在月份之间存在显著差异,COD在季度和月份之间无显著性差异;指标相关性分析表明,进水量和氨氮之间呈负相关,氨氮和总磷、COD和总磷之间呈正相关,且相关性显著。在此分析的基础上对污水处理厂设计、工艺选择及运行管理提出了一些建议。     

吸附剂烟气脱砷的研究现状

大气砷污染问题日益引起人们的重视,吸附剂能够在去除烟气中砷的同时去除其他有害气体,是控制烟气砷含量、防止砷污染的有效途径.文章分析了砷在废气中的形态及分布,总结了近年来氧化钙、活性炭、飞灰和金属氧化物作为吸附剂用于烟气脱砷的最新研究进展,重点分析了各自的吸附机理及不同因素对脱砷过程的影响.指出吸附过程通常以化学吸附为主...     

中药工业废水处理研究进展

概述了目前中药工业废水处理应用的各种物化、生物处理技术;对主要处理工艺的应用特点进行了论述;指出了中药工业废水处理技术今后的研究开发方向和思路。     

适用于废水处理的DSA电极的研究进展

电化学氧化技术因其具有氧化能力强、可控性高、运行费用低及对环境友好的特点,引起了人们极大的关注.处于核心地位的DSA（Dimensionally Stable Anodes）电极是电化学工作者研究的重点.Ti基氧化铅、氧化铱、锡锑氧化物等电极是目前最有研究价值的DSA电极,文章介绍了这些电极的一些最新的研究成果.     

适用于废水处理的DSA电极的研究进展

电化学氧化技术因其具有氧化能力强、可控性高、运行费用低及对环境友好的特点,引起了人们极大的关注。处于核心地位的DSA（Dimensionally Stable Anodes）电极是电化学工作者研究的重点。Ti基氧化铅、氧化铱、锡锑氧化物等电极是目前最有研究价值的DSA电极,文章介绍了这些电极的一些最新的研究成果。     

应用加载磁絮凝技术处理垃圾渗滤液试验研究

垃圾渗滤液是一种成分复杂多变的高浓度难处理有机废水。本研究采用加载磁絮凝技术对垃圾渗滤液进行预处理,并讨论了适宜的磁载体、凝聚剂和絮凝剂的加入量。     

基于功率法的结构⁃TMD减震控制分析∗

建立了结构-TMD振动方程,推导了无控结构和带TMD受控结构基于功率表达的运动方程,分别解释并给出了各种功率表达参数的物理意义,推导了随机激励下结构耗能功率流均值的随机表达式,对比分析了基于功率法的结构-TMD优化方法与其他优化方法的优化分析结果,并对其减震控制效果进行了对比分析。结果表明,结构-TMD系统的参数可以通过耗能功率流随机分析方法所得均值进行优化,且通过功率法优化后,结构在减震效果上优于其他传统方法得到的结果,从耗能功率均值的随机分析和时程功率分析角度证明了TMD控制的有效性;TMD做功功率为负时对结构有控制效果,起吸收转移能量的作用,且功率幅值越大控制效果越好,做功功率为正时则相反。     

Formation pathways of brominated products from benzophenone-4 chlorination in the presence of bromide ions

The brominated products, formed in chlorination treatment of benzophenone-4 in the presence of bromide ions, were identified, and the formation pathways were proposed.Under disinfection conditions, benzophenone-4 would undertake electrophilic substitution generating mono- or di-halogenated products, which would be oxidized to esters and further hydrolyzed to phenol derivatives. The generated catechol intermediate would be transformed into furan-like heterocyclic product. The product species were p H-dependent,while benzophenone-4 elimination was chlorine dose-dependent. When the chlorination treatment was performed on ambient water spiked with benzophenone-4 and bromide ions, most of brominated byproducts could be detected, and the acute toxicity significantly increased as well.     

Aerobic granules cultivated and operated in continuous-flow bioreactor under particle-size selective pressure

A novel method based on the selective pressure of particle size （particle-size cultivation method, PSCM） was developed for the cultivation and operation of aerobic granular sludge in a continuous-flow reactor, and compared with the conventional method based on the selective pressure of settling velocity （settling-velocity cultivation method, SVCM）. Results indicated that aerobic granules could be cultivated in continuous operation mode by this developed method within 14 days. Although in the granulation process, under particle-size selective pressure, mixed liquor suspended solids （MLSS） in the reactor fluctuated greatly and filamentous bacteria dominated the sludge system during the initial operation days, no obvious difference in profile was found between the aerobic granules cultivated by PSCM and SVCM. Moreover, aerobic granules cultivated by PSCM presented larger diameter, lower water content and higher specific rates of nitrification, denitrifieation and phosphorus removal, but lower settling velocity. Under long term operation of more than 30 days, aerobic granules in the continuous-flow reactor could remain stable and obtain good chemical oxygen demand （COD）, NH4^＋-N, total nitrogen （TN） and total phosphorus （TP） removal. The results indicate that PSCM was dependent on the cultivation and maintenance of the stability of aerobic granules in continuous-flow bioreactors.