昆明市城中村火灾事故统计分析

城中村是中国快速城市化进程中的一个普遍现象,由于缺乏统一规划和专门管理,城中村的高火灾风险成为当前面临的重要问题并得到社会各界关注.为获得昆明市城中村火灾的特点和规律,从2004-2006年昆明市火灾统计记录中区分出城中村和非城中村火灾数据,在此基础上采用Bayes统计分析城中村不同用途建筑物的火灾发生概率及概率比例.结果表明,相比城中村其他用途的建筑,居住用房火灾概率较低,而具有生产和加工性质的行业作坊、易燃易爆场所和娱乐场所的火灾概率较高,分别是居住用房的48倍、26倍和18倍.进一步采用火灾原因-场所关联对比分析了城中村和非城中村火灾的特点.从火灾发生场所看,与非城中村相比,城中村居住场所火灾发生比例高7.2%,路边可燃物高88.8%,木材、家具加工厂高184.8%,易燃易爆场所高521.4%; 从火灾原因看,城中村电气、电线短路致灾比例高1 2%,限制行为能力人(小孩和精神病人)致灾比例高65 1%,燃放烟花爆竹致灾比例高3.5%,吸烟致灾比例高50.9%,违章操作致灾比例高59.0%.这些差异基本上反映了城中村的主要外在特征,这些外在特征经城中村实地调研得到证实.     

TiO2-xNx光催化氧化苯甲酸的研究

采用悬浮态光催化反应体系,以氙灯为光源,自制纳米TiO2-xNx为催化剂,考察了苯甲酸光催化氧化过程中TiO2-xNx质量浓度、反应体系初始pH和苯甲酸初始质量浓度对苯甲酸溶液中TOC去除率的影响。实验结果表明：最佳催化剂质量浓度为0．30g／L;TiO2-xNx的等电点为pH=5．3,在酸性条件下（pH=2．0）更有利于苯甲酸在催化剂表面的吸附,以及光生电子与O2反应生成·OH的进行;随苯甲酸初始质量浓度增加,TOC去除率降低,反应速率也相应地降低。TiO2-xNx比P25型TiO2表现出更强的浓度适应能力。     

电源变压器温升试验中（绕组法）的影响因素及不确定度的评估

本文中探讨的是根据绕组法计算电源变压器绕组温升的试验方法,以及对整个试验过程中环境、仪器设备、仪表、人为因素所引起的误差等对最终试验结果的影响,并对其测量不确定度进行评估。     

家居室内设计及新进展的思考

在对传统室内设计基本观点阐述与理解的基础上分析其整体性、可持续发展,并着重探讨在物质文明和精神文明高度发展的今天,现代室内设计在个性化、自然性、现代性、艺术性等方面发展的新趋势.通过对现代室内设计特点和发展趋势的分析,创造出一个适合人们现代生活的理想空间.     

Radiation-induced degradation of methyl orange in aqueous solutions

Degradation of methyl orange under gamma-irradiation was investigated. The reactions followed pseudo first-order kinetics. Apparent degradation rate constant, estimated through linear regression analysis, increased with an increase of dose rate and a decrease of initial methyl orange concentration. Degradation of methyl orange was significantly accelerated under oxidative condition, but was slightly enhanced under reductive condition. However, the result of decoloration was better under reductive condition than oxidative one. An analysis on the intermediates using Fourier transform infrared and gas chromatography/mass spectrometry demonstrates that the radiolytic degradation of methyl orange was processed with different C-N cleavages under oxidative and reductive conditions.     

Sorption of pentachlorophenol on surficial sediments: the roles of metal oxides and organic materials with co-existed copper present

The sorption characteristics of pentachlorophenol (PCP) in the surficial sediments were investigated using a selective extraction procedure. The results show that the Gamma(max) of PCP sorption decreased from 1.60mumolg(-1) to 0.69mumolg(-1) by approximately 60% after selective removal of organic materials from the sediments. The sorption of PCP in the sediments after selective removal of Mn oxides increased nearly up to 600% (from 1.60mumolg(-1) to 11.11mumolg(-1)) and, to a less degree, the PCP sorption in the sediments after simultaneous removal of Fe/Mn oxides (Gamma(max)=3.53mumolg(-1)). The analysis of the data using an additional model indicates that the contribution of Mn oxides to PCP sorption was negative, and Fe oxides and organic materials both have greater potential for sorption of PCP with less contribution from residues including Mn and Fe oxides in the residual fractions determined by a sequential extraction procedure and clay and silicate minerals. The differences in the decreased degrees of PCP sorption with increasing of Cu suggest that competition between Cu and PCP for sorption sites mainly takes place on Fe oxides.     

Antioxidative response to Cd in a newly discovered cadmium hyperaccumulator, Arabis paniculata F

A hydroponic experiment was carried out to study the effect of cadmium (Cd) on growth, Cd accumulation, lipid peroxidation, reactive oxygen species (ROS) content and antioxidative enzymes in leaves and roots of Arabis paniculata F., a new Cd hyperaccumuator found in China. The results showed that 22-89 microM Cd in solution enhanced the growth of A. paniculata after three weeks, with 21-27% biomass increase compared to the control. Cd concentrations in shoots and roots increased with increasing Cd supply levels, and reached a maximum of 1662 and 8670 mg kg(-1) Cd dry weight at 178 microM Cd treatment, respectively. In roots, 22-89 microM Cd reduced the content of malondialdehyde (MDA), superoxide (O(2)(-1)) and H(2)O(2) as well as the activities of superoxide dismutase (SOD), guaiacol peroxidase (GPX), ascorbate peroxidase (APX) and glutathione reductase (GR). In leaves, the contents of MDA, O(2)(-1) and H(2)O(2) remained unaffected by 22-89 microM Cd, while 178 microM Cd treatment significantly increased the MDA content, 69.5% higher than that of the control; generally, the activities of SOD, catalase (CAT), GPX and APX showed an increasing pattern with increasing Cd supply levels. Our present work concluded that A. paniculata has a great capability of Cd tolerance and accumulation. Moderate Cd treatment (22-89 microM Cd) alleviated the oxidative stress in roots, while higher level of Cd addition (178 microM) could cause an increasing generation of ROS, which was effectively scavenged by the antioxidative system.     

Combustion characteristics of Malaysian municipal solid waste and predictions of air flow in a rotary kiln incinerator

Malaysia is in dire need of alternatives to landfilling for solid waste management. Recently, landfills have faced the problems of overfilling, overflowing of leachates leading to pollution of water resources, and uncontrolled dust emissions adversely affecting the local environment. With the rising cost of urbanization coupled with the high rate of waste generation, one possible method of waste treatment that is receiving particular attention by the government is incineration. Incineration of solid waste is rather new in Malaysia, with limited usage in handling small sources of waste generation such as the municipal solid waste (MSW) of resort islands; however, its potential in ameliorating the problems associated with solid waste treatment may make it an attractive alternative to landfill. This article presents the results of test runs conducted to investigate the performance of a locally designed and manufactured rotary kiln incinerator (RKI). The test runs were conducted using MSW collected from the Shah Alam municipality. The combustion efficiency was analyzed by looking at the temperature profiles and chemical species concentrations. To complement the combustion characteristics measurements, predictions of the air flow in the incinerator during the process were also investigated. The overall performance of the RKI suggests that it is suitable for treating MSW.     

Influence of Technological Process on Biodegradation of PVA/Waxy Starch Blends in an Aerobic and Anaerobic Environment

Improving biodegradability of PVA/starch blends is a reality already documented by a number of works. Admittedly, mechanical properties of products (for example, tensile strength) are somewhat worse, but suitable composition optimizing or chemical modifying of starch may eliminate the problem to a large degree. This work is an attempt to find another potential effect influencing biodegradability, that of technological procedure for producing films from these blends on an extruder. The procedure with a so-called pre-extrusion step (two-stage) and dry-blend (single-stage) produced blends of slightest differences in achieved biodegradability (virtually within limits of experimental error) in aerobic (76 vs. 79%) as well as anaerobic breakdown (48 vs. 52%). Conversely, morphological analysis exhibited superior homogeneity of films prepared by the two-stage process; their tensile strength was also higher.